Skip to contentSkip to conversation

ingress QoS

LARTC Robert Felber 2 participants 2 messages Mar 15, 2004 – Mar 17, 2004

lore
Share & tools
lore
#0 lore raw

Hello guys,

Setup: iptables 1.2.9 (patch-o-matic not used)
linux 2.4.25 (gentoo vanilla, everything needed compiled in) eth1 -> pppoe (ppp0)
eth0

Goal: Fair queuing of incomming traffic

Story:

since I've failed to use IMQ with iptables 1.2.9 and linux 2.4.25, I've tried to attach a HTB qdisc to eth0 with a root of 100mbit and classes with rates of 100mbit and DSL downlink speed (768 kbit). The downlink class I divided into important traffic (700 kbit) and bulk (68 kbit) - both got HTB qdiscs.
The router packets with source 10.0.0.1 end up in the 100mbit queue, but I have to set this rule to prio 1 otherwise the bulk rule (src 0.0.0.0/0) will take place.

Everything is working fine so far.

Since I wanted to speed up browsing while having other downloads, packets with sport 80 are queued in the important queue.
Also I wanted to be very smart and use a transparent squid. But then I thought twice and realized, that packets with sport 80 end up in squid (except it was a direct connection), thus the packets are queued different.

Question is now: do I also have to add qdiscs to device lo, or how can I queue the router's incomming traffic for routers's local processes. If I have to add qdiscs for lo, what would be the bandwidth? And, would that be clever in general?

If someone is interessted in the script, drop a note.

Thanks in advance,
Rob

Signature · 6 lines
| Robert Felber (System-Administrator)    Tel: +49 (0) 89 / 453 12-86 |
| Autohaus Erich Kuttendreier             Fax: +49 (0) 89 / 453 12-80 |
| Drosselweg 21                           PGP:               896CF30B |
| 81827 Muenchen                                                      |
|                                                                     |
| PGP-Fingerprint: CF36 AA93 9716 63E8 962F 15CC A80E 1A79 BF77 25EA  |
#1 lore raw
Quoted 7 lines · Robert Felber

Hello guys,

Setup: iptables 1.2.9 (patch-o-matic not used)
linux 2.4.25 (gentoo vanilla, everything needed compiled in) eth1 -> pppoe (ppp0)
eth0

Quoted 5 lines

Goal: Fair queuing of incomming traffic

Story:

since I've failed to use IMQ with iptables 1.2.9 and linux 2.4.25,

What failed - my 2.4.24 setup may work I'll try 25 soon.

Quoted 4 lines

I've tried to attach a HTB qdisc to eth0 with a root of 100mbit and classes with rates of 100mbit and DSL downlink speed (768 kbit). The downlink class I divided into important traffic (700 kbit) and bulk (68 kbit) - both got HTB qdiscs.

You need to set limits to 80% or less - depending on number of tcps and how much you care about latency.

Quoted 13 lines

The router packets with source 10.0.0.1 end up in the 100mbit queue, but I have to set this rule to prio 1 otherwise the bulk rule (src 0.0.0.0/0) will take place.

Everything is working fine so far.

Since I wanted to speed up browsing while having other downloads, packets with sport 80 are queued in the important queue.
Also I wanted to be very smart and use a transparent squid. But then I thought twice and realized, that packets with sport 80 end up in squid (except it was a direct connection), thus the packets are queued different.

Quoted 4 lines

Question is now: do I also have to add qdiscs to device lo, or how can I queue the router's incomming traffic for routers's local processes. If I have to add qdiscs for lo, what would be the bandwidth? And, would that be clever in general?

If what you want to do is controll/share incoming DSL bandwidth for local and forwarded traffic you need to put IMQ on ppp0. I guess you don't need to throttle/priorotise squid to the LAN for stuff that's cached, but do when it's getting stuff from the net.

Andy.

Quoted 8 lines

If someone is interessted in the script, drop a note.

Thanks in advance,
Rob

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/