3-order allocation failed with cdda2wav
Hi all :)
I've recently started to use cdda2wav (I've been using cdparanoia
for years and wanted to take a look at cdda2wav), and I have a
problem: each time I use cdda2wav the kernel spills '__alloc_pages:
3-order allocation failed (gpf=0x20/0)' six times.
I'm using cdrtools 2.0.3, with kernel 2.4.25 and ide-scsi. I have
a Plextor CD-writer that I use to do CDDA ripping, but the problem appears with other drives too (I've tested with a Liteon DVD, too).
Maybe a cdda2wav problem? Kernel problem?
In addition to this problem, I have another one, this time
related with interfaces: if I use the SCSI generic interface with cdda2wav, it runs without problems (well, except that noted above) but uses a lot of CPU (up to 60%), so I tested with cooked_ioctl interface, and then the CPU use drops to 4% but I got two error messages about CDIOCSETCDDA not available, but the allocation problem DOES NOT HAPPEN :?
Any help? Thanks in advance :)
Raúl Núñez de Arenas Coronado
Signature · 2 lines
Linux Registered User 88736 http://www.pleyades.net & http://raul.pleyades.net/
Quoted 7 lines · DervishD
Hi all :)
I've recently started to use cdda2wav (I've been using cdparanoia
for years and wanted to take a look at cdda2wav), and I have a
problem: each time I use cdda2wav the kernel spills '__alloc_pages:
3-order allocation failed (gpf=0x20/0)' six times.
Quoted 5 lines
I'm using cdrtools 2.0.3, with kernel 2.4.25 and ide-scsi. I have
a Plextor CD-writer that I use to do CDDA ripping, but the problem appears with other drives too (I've tested with a Liteon DVD, too).Maybe a cdda2wav problem? Kernel problem?
You can ignore the messages, but yeah I know they are annoying...
Quoted 9 lines
In addition to this problem, I have another one, this time
related with interfaces: if I use the SCSI generic interface with cdda2wav, it runs without problems (well, except that noted above) but uses a lot of CPU (up to 60%), so I tested withcooked_ioctlinterface, and then the CPU use drops to 4% but I got two error messages about CDIOCSETCDDA not available, but the allocation problem DOES NOT HAPPEN :?Any help? Thanks in advance :)
Upgrade to 2.6.5-rc1, it'll solve all your problems in this area :-)
Signature · 1 line
Jens Axboe
Hi Jens :)
* Jens Axboe <[email protected]> dixit:
Quoted 2 lines
Quoted 1 line
Maybe a cdda2wav problem? Kernel problem?
You can ignore the messages, but yeah I know they are annoying...
If I can safely ignore them, the only problem is the waste of
sectors for my /var/log/messages ;))) Men, you've answered REAL fast ;))) Thanks a lot :)
Quoted 9 lines
Quoted 8 lines
In addition to this problem, I have another one, this time
related with interfaces: if I use the SCSI generic interface with cdda2wav, it runs without problems (well, except that noted above) but uses a lot of CPU (up to 60%), so I tested withcooked_ioctlinterface, and then the CPU use drops to 4% but I got two error messages about CDIOCSETCDDA not available, but the allocation problem DOES NOT HAPPEN :?
Any help? Thanks in advance :)Upgrade to 2.6.5-rc1, it'll solve all your problems in this area :-)
Thanks for the advice :) I'm planning to switch to 2.6.x, but
first I must make a list with all software I must upgrade together with the kernel. Moreover, I had in mind switching at 2.6.10.
Thanks a lot for answering so fast and for the advice :))
Raúl Núñez de Arenas Coronado
Signature · 2 lines
Linux Registered User 88736 http://www.pleyades.net & http://raul.pleyades.net/