Skip to contentSkip to conversation

3-order allocation failed with cdda2wav

DISCUSSION DervishD 2 participants 3 messages Mar 16, 2004

lore
Share & tools
lore

DervishD

author
#0 lore raw

Hi all :)

I've recently started to use cdda2wav (I've been using cdparanoia
for years and wanted to take a look at cdda2wav), and I have a
problem: each time I use cdda2wav the kernel spills '__alloc_pages:
3-order allocation failed (gpf=0x20/0)' six times.

I'm using cdrtools 2.0.3, with kernel 2.4.25 and ide-scsi. I have
a Plextor CD-writer that I use to do CDDA ripping, but the problem appears with other drives too (I've tested with a Liteon DVD, too).

Maybe a cdda2wav problem? Kernel problem?

In addition to this problem, I have another one, this time
related with interfaces: if I use the SCSI generic interface with cdda2wav, it runs without problems (well, except that noted above) but uses a lot of CPU (up to 60%), so I tested with cooked_ioctl interface, and then the CPU use drops to 4% but I got two error messages about CDIOCSETCDDA not available, but the allocation problem DOES NOT HAPPEN :?

Any help? Thanks in advance :)

Raúl Núñez de Arenas Coronado

Signature · 2 lines
Linux Registered User 88736
http://www.pleyades.net & http://raul.pleyades.net/
#1 lore raw
Quoted 7 lines · DervishD

Hi all :)

I've recently started to use cdda2wav (I've been using cdparanoia
for years and wanted to take a look at cdda2wav), and I have a
problem: each time I use cdda2wav the kernel spills '__alloc_pages:
3-order allocation failed (gpf=0x20/0)' six times.

Quoted 5 lines

I'm using cdrtools 2.0.3, with kernel 2.4.25 and ide-scsi. I have
a Plextor CD-writer that I use to do CDDA ripping, but the problem appears with other drives too (I've tested with a Liteon DVD, too).

Maybe a cdda2wav problem? Kernel problem?

You can ignore the messages, but yeah I know they are annoying...

Quoted 9 lines

In addition to this problem, I have another one, this time
related with interfaces: if I use the SCSI generic interface with cdda2wav, it runs without problems (well, except that noted above) but uses a lot of CPU (up to 60%), so I tested with cooked_ioctl interface, and then the CPU use drops to 4% but I got two error messages about CDIOCSETCDDA not available, but the allocation problem DOES NOT HAPPEN :?

Any help? Thanks in advance :)

Upgrade to 2.6.5-rc1, it'll solve all your problems in this area :-)

Signature · 1 line
Jens Axboe
author
#2 lore raw

Hi Jens :)

* Jens Axboe <[email protected]> dixit:

Quoted 2 lines
Quoted 1 line

Maybe a cdda2wav problem? Kernel problem?

You can ignore the messages, but yeah I know they are annoying...

If I can safely ignore them, the only problem is the waste of
sectors for my /var/log/messages ;))) Men, you've answered REAL fast ;))) Thanks a lot :)

Quoted 9 lines
Quoted 8 lines

In addition to this problem, I have another one, this time
related with interfaces: if I use the SCSI generic interface with cdda2wav, it runs without problems (well, except that noted above) but uses a lot of CPU (up to 60%), so I tested with cooked_ioctl interface, and then the CPU use drops to 4% but I got two error messages about CDIOCSETCDDA not available, but the allocation problem DOES NOT HAPPEN :?
Any help? Thanks in advance :)

Upgrade to 2.6.5-rc1, it'll solve all your problems in this area :-)

Thanks for the advice :) I'm planning to switch to 2.6.x, but
first I must make a list with all software I must upgrade together with the kernel. Moreover, I had in mind switching at 2.6.10.

Thanks a lot for answering so fast and for the advice :))

Raúl Núñez de Arenas Coronado

Signature · 2 lines
Linux Registered User 88736
http://www.pleyades.net & http://raul.pleyades.net/