Skip to contentSkip to conversation

EEPROM updation for the MAC address

U-Boot-Users Wolfgang Denk 1 participant 1 message Mar 28, 2004 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw
Quoted 3 lines · In message <[email protected]> you…

u-boot is not accepting me to change the ethernet address. Is there any
specific reasons for it.

This is done so intentionally. Read the documentation:
http://www.denx.de/twiki/bin/view/DULG/UBootEnvVariables

There are variables (MAC address, serial number, etc.) which are supposed to be set once by the manufacturer of the board, and which do not need to be changed after that, and/or where the end user should not be able to change them. This is what you see.

Quoted 1 line

Is there any way to change the MAC address in my EEPROM?

Yes, of course. Everything is possible in software.

And BTW: please NEVER send non-administrative messages to the u-boot-users-request at lists.sourceforge.net address; the mailing list address is u-boot-users at lists.sourceforge.net

Best regards,

Wolfgang Denk

Signature · 4 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
Pain is a thing of the mind.  The mind can be controlled.
	-- Spock, "Operation -- Annihilate!" stardate 3287.2