Skip to contentSkip to conversation

tcsim (was: Can I give more bandwidth to a specific URL)

LARTC Jason Boxman 1 participant 1 message Apr 9, 2004

lore
Share & tools
lore
#0 lore raw
Quoted 10 lines · Jason Boxman

On Tuesday 06 April 2004 05:17, Martin A. Brown wrote:
<snip>

Quoted 6 lines

If you are just starting out with traffic control under Linux, I strongly recommend learning and using tcng from the beginning. The control language offered by tcng (although technical) is much more like English or human language than the more arcane tc syntax. Here are some starting points for learning about tcng [4] [5]. (Lest there be any doubt, you will need tc, from iproute2, as well as tcng.)

Quoted 7 lines

Speaking of TCNG, I read through the various guides and I still can't figure out how I am supposed to be using tcsim. While I can get it to output information and graph it, the output does not mean anything to me. I was expecting output similar to what appears on the HTB author's Web site, since that means a lot more to me.

What is tcsim telling me exactly?

Does no one use tcsim?

Quoted 13 lines

Thanks!

<snip>

Quoted 8 lines

-Martin

[0] http://lartc.org/
[1] http://www.docum.org/
[2] http://www.docum.org/stef.coene/qos/faq/cache/
[3] http://tldp.org/HOWTO/Traffic-Control-HOWTO/
[4] http://tldp.org/HOWTO/Traffic-Control-tcng-HTB-HOWTO/
[5] http://linux-ip.net/gl/tcng/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/