sensors.conf for an Abit BP6 motherboard
PATCH 1/1 sensors.conf for an Abit BP6 motherboard
Hi all !
I have attached a patch that adds comments to sensors.conf to explain how to configure it for an Abit BP6 motherboard. Please feel free to apply it or not.
Cheers,
Aurelien
Signature · 21 lines
.''`. Aurelien Jarno GPG: 1024D/F1BCDB73 : :' : Debian GNU/Linux developer | Electrical Engineering Student `. `' [email protected] | [email protected] `- people.debian.org/~aurel32 | www.aurel32.net -------------- next part -------------- diff -urN lm_sensors2.orig/etc/sensors.conf.eg lm_sensors2/etc/sensors.conf.eg --- lm_sensors2.orig/etc/sensors.conf.eg 2004-04-16 20:32:04.000000000 +0200 +++ lm_sensors2/etc/sensors.conf.eg 2004-04-16 20:33:19.000000000 +0200 @@ -404,6 +404,12 @@ label in7 "V5SB" label in8 "VBat" +# Abit BP6 motherboard has a few differences. VCore1 and VCore2 are the core +# voltages of the two processors. Vtt is memory bus termination resistors +# voltage. +# label in1 "Vtt" +# label in8 "VCore2" + compute in3 ((6.8/10)+1)*@ , @/((6.8/10)+1) compute in4 ((28/10)+1)*@ , @/((28/10)+1) compute in5 (5.14 * @) - 14.91 , (@ + 14.91) / 5.14
PATCH 1/1 sensors.conf for an Abit BP6 motherboard
Quoted 3 lines
I have attached a patch that adds comments to sensors.conf to explain how to configure it for an Abit BP6 motherboard. Please feel free to apply it or not.
Looks interesting, I've applied it.
Thanks.
Signature · 2 lines
Jean Delvare http://www.ensicaen.ismra.fr/~delvare/