Skip to contentSkip to conversation

2 Gateways

LARTC Mihai Vlad 4 participants 4 messages May 27, 2004 – May 28, 2004

lore
Share & tools
lore

Mihai Vlad

author
#0 lore raw

Hello again,

I may have a common problem to solve but it seems it is harder than I thought...

I have 2 internet providers (each one having a different gateway). Behind the router there are around 100 clients that are SNAT-ed.

I want some clients to be SNAT-ed to the first provider, while the others to the second one.
The following lines should work:

iptables -t nat -A POSTROUTING -s 172.17.31.81 -j SNAT --to-source $INET_IP_1
iptables -t nat -A POSTROUTING -s 172.17.31.82 -j SNAT --to-source $INET_IP_2

But... there is a problem... I have to make the packet (after it has been SNAT-ed)
follow the gateway corresponding to the $INET_IP_1 or to the $INET_IP_2 respectively.

In my routing table I have only one default route... corresponding to one of the gateways.
Is it possible to have 2 default routes? Is there a more elegant way to solve this problem?

Is there a way to tell the routing table that every request that has the source address $INET_IP_1
follow the $GW_1, and every request that has the source address $INET_IP_2 follow the $GW_2?

Thanks in advance,
Mihai Vlad

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

Mihai,

Quoted 9 lines

But... there is a problem... I have to make the packet (after it has been SNAT-ed)
follow the gateway corresponding to the $INET_IP_1 or to the $INET_IP_2 respectively.

In my routing table I have only one default route... corresponding to one of the gateways.
Is it possible to have 2 default routes? Is there a more elegant way to solve this problem?

you basically want to use the 'ip route' command, and setup 2 routing tables.

Quoted 4 lines

Is there a way to tell the routing table that every request that has the source address $INET_IP_1
follow the $GW_1, and every request that has the source address $INET_IP_2 follow the $GW_2?

yup, you setup the two tables, one has GW_1 and one has GW_2, and direct traffic into the tables based on it's address.
take a look through the mailling list archives and doco on the web for examples. it's not too hard.

regards,

Signature · 10 lines
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Damion de Soto - Software Engineer  email:     [email protected]
SnapGear - A CyberGuard Company ---    ph:         +61 7 3435 2809
  | Custom Embedded Solutions          fax:         +61 7 3891 3630
  | and Security Appliances            web: http://www.snapgear.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  ---  Free Embedded Linux Distro at   http://www.snapgear.org  ---
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Mihai Vlad
Quoted 7 lines · Mihai Vlad

Is there a way to tell the routing table that every request that has the source address $INET_IP_1
follow the $GW_1, and every request that has the source address $INET_IP_2 follow the $GW_2?

Thanks in advance,
Mihai Vlad

Unless I'm missing something really obvious, start here
http://lartc.org/howto/lartc.rpdb.html

and then read
http://www.linux-ip.net/html/adv-multi-internet.html
http://www.linux-ip.net/html/ch-routing.html

and finally, google "martin brown lartc changing default route" and read the messages in that thread.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#3 lore raw
In reply to Mihai Vlad

Hi Mihai,

You can do this by iproute and only if your box is configured as
[*] IP: advanced router
You will also need ip-utils.

"ip route show" will show the main table with all your routes but what
is most important is your default $GW_1

So, let's now create another table, with default gateway $GW_2 then,
make a rule so all from $INET_IP_2 should follow that table :

ip route add default via $GW_2 table secondary
( if iputils will scream that doesn't know who is "secondary" create "iproute2" in your "/etc" then in that new dir create and edit the file named "rt_tables" and put on the first row "10 secondary". It should look like this :

#cat /etc/iproute2/rt_tables
10 secondary
#

Then make a rule which says that everything leaving your box with ip
$INET_IP_2 should go to $GW_2 :
ip rule add from $INET_IP_2 table secondary

And that's it !

P.S. Daca iti nu iti iese da-mi un mail si vedem care e buba !

Quoted 41 lines

Hello again,

I may have a common problem to solve but it seems it is harder than I thought...

I have 2 internet providers (each one having a different gateway). Behind the router there are around 100 clients that are SNAT-ed.

I want some clients to be SNAT-ed to the first provider, while the others to
the second one.
The following lines should work:

iptables -t nat -A POSTROUTING -s 172.17.31.81 -j SNAT --to-source $INET_IP_1
iptables -t nat -A POSTROUTING -s 172.17.31.82 -j SNAT --to-source $INET_IP_2

But... there is a problem... I have to make the packet (after it has been SNAT-ed)
follow the gateway corresponding to the $INET_IP_1 or to the $INET_IP_2 respectively.

In my routing table I have only one default route... corresponding to one of
the gateways.
Is it possible to have 2 default routes? Is there a more elegant way to solve this problem?

Is there a way to tell the routing table that every request that has the source address $INET_IP_1
follow the $GW_1, and every request that has the source address $INET_IP_2 follow the $GW_2?

Thanks in advance,
Mihai Vlad

Quoted 4 lines

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Adrian Saileanu
Netmaster Communications Srl

address: Str. Ion Brezoianu Nr. 20
Sector 1, Bucuresti, Romania

office: +40 21 315 92 00
mobile: +40 723 979 586
email: [email protected]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/