Debugging U-Boot Under DDD
This may be a trivial question, but I hope that someone can answer me. I am bring up u-boot on 8xx.
While doing source level debugging under ddd, whenever I do step, stepi, next or nexti I see green instruction pointer jump all over the code. e.g. it would go to first line, than third line, than 7 line. If I look at machine code window, it is running in normal predictable way.
See: http://www.denx.de/twiki/bin/view/DULG/DebuggingTricks
Matthew
Quoted 18 lines · Talib Alim
This may be a trivial question, but I hope that someone can answer me. I am bring up u-boot on 8xx.
While doing source level debugging under ddd, whenever I do step, stepi, next or nexti I see green instruction pointer jump all over the code. e.g. it would go to first line, than third line, than 7 line. If I look at machine code window, it is running in normal predictable way.
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
Signature · 1 line
Matthew McClintock <[email protected]>
Quoted 1 line · In message <[email protected]> you wrote:
This may be a trivial question, but I hope that someone can answer me.
It's not a trivial question, but a FAQ.
Quoted 4 lines
While doing source level debugging under ddd, whenever I do step, stepi, next or nexti I see green instruction pointer jump all over the code. e.g. it would go to first line, than third line, than 7 line. If I look at machine code window, it is running in normal predictable way.
See http://www.denx.de/twiki/bin/view/DULG/DebuggingTricks
Best regards,
Wolfgang Denk
Signature · 4 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de
When it is incorrect, it is, at least *authoritatively* incorrect.
- Hitchiker's Guide To The GalaxyThanks for the link.
I have debugged u-boot to a point, it has relocated code, setup execptions / interrrupts etc and in main_loop().
At this point if I "Cont", I get pop-up from ddd
/.../u-boot-1.1.1/serial.c: No such file or directory.
There are 23 serial.c files in the tree. Those possibly relavent to me are
./cpu/mpc8xx/serial.c./tools/gdb/serial.c./drivers/serial.c
Just before relocating the code, I typed following statements
(gdb) symbol-file
(gdb) add-symbol-file u-boot 0xbda000
(gdb) dir cpu/mpc8xx
(gdb) dir board/fads
(gdb) dir tools/gdb/serial.c
(gdb) dir drivers/serial.c
Well, my question is why I am getting "No such file or directory" from ddd and how can I fix this problem.
Usman
Quoted 27 lines · --- Wolfgang Denk
In message <[email protected]> you
Quoted 2 lines · wrote:
This may be a trivial question, but I hope that someone can answer me.
It's not a trivial question, but a FAQ.
Quoted 5 lines
While doing source level debugging under ddd, whenever I do step, stepi, next or nexti I see green instruction pointer jump all over the code. e.g. it would go to first line, than third line, than 7 line. If I look at machine code window, it is running in normal predictable way.
See http://www.denx.de/twiki/bin/view/DULG/DebuggingTricks
Best regards,
Wolfgang Denk
Signature · 7 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de When it is incorrect, it is, at least *authoritatively* incorrect. - Hitchiker's Guide To The Galaxy
Quoted 3 lines · In message <[email protected]> you wrote:
At this point if I "Cont", I get pop-up from ddd /.../u-boot-1.1.1/serial.c: No such file or directory.
Sounds like a toolchain or user problem to me.
Quoted 4 lines
Just before relocating the code, I typed following statements
(gdb) symbol-file
(gdb) add-symbol-file u-boot0xbda000
How did you start gdb / DDD? Did you really load "u-boot" (i. e. the ELF file)?
Quoted 4 lines
(gdb) dir cpu/mpc8xx
(gdb) dir board/fads
(gdb) dirtools/gdb/serial.c
(gdb) dirdrivers/serial.c
None of these should be necessary. Which toolchain are you using?
Best regards,
Wolfgang Denk
Signature · 3 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de Old programmers never die, they just become managers.
I am using eldk
[root at lab1 eldk]# cat version
ELDK version 3.0ppc_8xx: Build 2004-02-16
I am starting ddd with following command line
ddd --debugger /opt/eldk/usr/bin/ppc_8xx-gdb
target remote bdi:2001
symbol u-boot
set $pc = 0x02000100 # my flash is mapped @ 0x02000000
I am using bin {& not elf}, apart from this problem, it seems to be doing fine.
TA
Quoted 47 lines · --- Wolfgang Denk
In message <[email protected]> you
Quoted 3 lines · wrote:
At this point if I "Cont", I get pop-up from ddd /.../u-boot-1.1.1/serial.c: No such file or directory.
Sounds like a toolchain or user problem to me.
Quoted 4 lines
Just before relocating the code, I typed following statements
(gdb) symbol-file
(gdb) add-symbol-file u-boot0xbda000How did you start gdb / DDD? Did you really load "u-boot" (i. e. the
ELF file)?Quoted 4 lines
(gdb) dir cpu/mpc8xx
(gdb) dir board/fads
(gdb) dirtools/gdb/serial.c
(gdb) dirdrivers/serial.cNone of these should be necessary. Which toolchain are you using?
Best regards,
Wolfgang Denk
Signature · 16 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de Old programmers never die, they just become managers. ------------------------------------------------------- This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com _______________________________________________ U-Boot-Users mailing list U-Boot-Users at lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
[U-Boot-Users] Strange Problem Debugging U-Boot
I am bringing up u-boot-1.1.1 on 852T.
I used "make FADS860T_config" for configuration. Since this is the closet
match I could find.
I was given FADS board with 852T, with working cpu, sdram and flash under BDI2000. I took values from bdi configuration and applied to u-boot.
If I single step starting from 0x02000100 (my flash starts @ 0x02000000) through to function void cpu_init_f (volatile immap_t * immr) line # 177. It works ok, but if I "Cont" after starting from 0x02000100, I get SIGABRT at line 177 of file u/mpc8xx/cpu_init.c.
{ line 177 is the actual line from u-boot-1.1.1 tree, line 181 which it
claims below is after I added few lines}
Program received signal SIGABRT, Aborted.0x02002540 in cpu_init_f (immr=0xff000000) at cpu_init.c:181 /home/uansari/sw/bootcode/u-boot-1.1.1/cpu/mpc8xx/cpu_init.c:181:5157:beg:0x2002540
Actual line is code:
/* now restrict to preliminary range */
memctl->memc_br0 = CFG_BR0_PRELIM;--->memctl->memc_or0 = CFG_OR0_PRELIM;
#if (defined(CFG_OR1_PRELIM) && defined(CFG_BR1_PRELIM))
memctl->memc_or1 = CFG_OR1_PRELIM;
memctl->memc_br1 = CFG_BR1_PRELIM;#endif
Any idea what is going on here ?
Thanks for the help.
[U-Boot-Users] Strange Problem Debugging U-Boot
Quoted 5 lines · In message <[email protected]> you wrote:
If I single step starting from
0x02000100(my flash starts @0x02000000) through to function voidcpu_init_f(volatileimmap_t* immr) line # 177. It works ok, but if I "Cont" after starting from0x02000100, I get SIGABRT at line 177 of fileu/mpc8xx/cpu_init.c.
This probably means that your BDI2000 config file is not OK.
Quoted 2 lines
{ line 177 is the actual line from u-boot-1.1.1 tree, line 181 which it
claims below is after I added few lines}
Such reports are useless. Always quote the exact lines in text.
Quoted 5 lines
Actual line is code:
/* now restrict to preliminary range */ memctl->memc_br0 = CFG_BR0_PRELIM;--->memctl->memc_or0 =
CFG_OR0_PRELIM;
This is much better.
Quoted 1 line
Any idea what is going on here ?
Read the comment in lines 127...141.
Best regards,
Wolfgang Denk
Signature · 3 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de If you fail to plan, plan to fail.
Quoted 1 line · In message <[email protected]> you wrote:
I am using eldk
OK.
Quoted 2 lines
I am using bin {& not elf}, apart from this problem, it seems to be doing fine.
Try loading the ELF file instead - then GDB will automatically load all required information about source files.
Best regards,
Wolfgang Denk
Signature · 4 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de The human mind treats a new idea the way the body treats a strange protein - it rejects it. - P. Medawar
I tried loading elf file, this is what I get
BDI>erase 0x02000000 chip
Erasing flash at 0x02000000
Erasing flash passed
BDI>prog 0x02000000 u-boot elf
Programming u-boot , please wait ....
- File offset 0x00000078 to address 0x04000000 size 131408 # Programming flash memory failed at 0x04000040
TA
Quoted 39 lines · --- Wolfgang Denk
In message <[email protected]> you
Quoted 1 line · wrote:
I am using eldk
OK.
Quoted 1 line
I am using bin {& not elf}, apart from this problem, it seems to
be
Quoted 1 line
doing fine.
Try loading the ELF file instead - then GDB will automatically load
all required information about source files.Best regards,
Wolfgang Denk
Signature · 19 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de The human mind treats a new idea the way the body treats a strange protein - it rejects it. - P. Medawar ------------------------------------------------------- This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com _______________________________________________ U-Boot-Users mailing list U-Boot-Users at lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
Quoted 9 lines · In message <[email protected]> you wrote:
I tried loading elf file, this is what I get
BDI>erase
0x02000000chip
Erasing flash at0x02000000
Erasing flash passed
BDI>prog0x02000000u-boot elf
Programming u-boot , please wait ....
- File offset0x00000078to address0x04000000size 131408 # Programming flash memory failed at0x04000040
You misunderstood. I was talking about loading the ELF file in GDB, not about programming it to flash using the BDI's telnet interface. These are completely different things.
Best regards,
Wolfgang Denk
Signature · 3 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de Always leave room to add an explanation if it doesn't work out.
Now I am confuse. I am running code which is stored on the flash. I am using ddd (gdb in background) to do source level debugging. If I load elf binary gdb, than I am not really running code on the 852t, but on by Linux / Intell based PC.
TA
Quoted 40 lines · --- Wolfgang Denk
In message <[email protected]> you
Quoted 9 lines · wrote:
I tried loading elf file, this is what I get
BDI>erase
0x02000000chip
Erasing flash at0x02000000
Erasing flash passed
BDI>prog0x02000000u-boot elf
Programming u-boot , please wait ....
- File offset0x00000078to address0x04000000size 131408 # Programming flash memory failed at0x04000040You misunderstood. I was talking about loading the ELF file in GDB,
not about programming it to flash using the BDI's telnet interface.
These are completely different things.Best regards,
Wolfgang Denk
Signature · 16 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de Always leave room to add an explanation if it doesn't work out. ------------------------------------------------------- This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com _______________________________________________ U-Boot-Users mailing list U-Boot-Users at lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
Quoted 4 lines · In message <[email protected]> you wrote:
Now I am confuse. I am running code which is stored on the flash. I am using ddd (gdb in background) to do source level debugging. If I load elf binary gdb, than I am not really running code on the 852t, but on by Linux / Intell based PC.
No. This is a cross debugger. Loading a file into GDB and running it on the target are completely separate things.
Best regards,
Wolfgang Denk
Signature · 6 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de
Lady Nancy Astor:
"Winston, if you were my husband, I'd put poison in your coffee."
Winston Churchill:
"Nancy, if you were my wife, I'd drink it."