2.6.9-rc3 software suspend (pmdisk) stopped working
I don't understand. The highmem issue was when resuming, not when suspending ? My laptop doesn't suspend with -rc3. Please elaborate ? What config do i change ? Remember i don't have ACPI, so unless pmdisk supports APM BIOS poweroff, then -rc3 is useless to me.
Thanks
M
-------- Original Message --------
Subject: Re: 2.6.9-rc3 software suspend (pmdisk) stopped working
Date: Fri, 1 Oct 2004 15:40:05 +0200
From: Pavel Machek <[email protected]>
To: Mitch DSouza <[email protected]>
CC: [email protected]
References: <[email protected]>
Hi!
Quoted 2 lines
I thought i was going barmy. I've reverted back to -rc2 which pmdisk works flawlessly on my laptop.
Actually problem turned out to be in highmem. Unless you are using highmem, -rc3 should work. You'll need to change config if switching from pmdisk to swsusp...
Pavel
Hi!
Quoted 4 lines
I don't understand. The highmem issue was when resuming, not when suspending ? My laptop doesn't suspend with -rc3. Please elaborate ? What config do i change ? Remember i don't have ACPI, so unless pmdisk supports APM BIOS poweroff, then -rc3 is useless to me.
There's no pmdisk in -rc3.
swsusp in -rc3 should support apm.
Check your .config to see if it is enabled, and make sure you have resume= on command line. If it still fails, mail me dmesg of failed attempt.
Pavel
Signature · 2 lines
People were complaining that M$ turns users into beta-testers... ...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!