Remove last reference to LDFLAGS_BLOB
PATCH 1/1 Remove last reference to LDFLAGS_BLOB
Nothing uses LDFLAGS_BLOB anymore, now that the arm binutils are fixed.
--
Brian Gerst
arch/m32r/Makefile +0 -1
@@ -5,7 +5,6 @@ LDFLAGS := OBJCOPYFLAGS := -O binary -R .note -R .comment -S LDFLAGS_vmlinux := -e startup_32 -LDFLAGS_BLOB := --format binary --oformat elf32-m32r CFLAGS += -pipe -fno-schedule-insns CFLAGS_KERNEL += -mmodel=medium
usr/initramfs_data.S +0 -22
@@ -1,28 +1,6 @@ /* initramfs_data includes the compressed binary that is the filesystem used for early user space. - Note: Older versions of "as" (prior to binutils 2.11.90.0.23 - released on 2001-07-14) dit not support .incbin. - If you are forced to use older binutils than that then the - following trick can be applied to create the resulting binary: - - - ld -m elf_i386 --format binary --oformat elf32-i386 -r \ - -T initramfs_data.scr initramfs_data.cpio.gz -o initramfs_data.o - ld -m elf_i386 -r -o built-in.o initramfs_data.o - - initramfs_data.scr looks like this: -SECTIONS -{ - .init.ramfs : { *(.data) } -} - - The above example is for i386 - the parameters vary from architectures. - Eventually look up LDFLAGS_BLOB in an older version of the - arch/$(ARCH)/Makefile to see the flags used before .incbin was introduced. - - Using .incbin has the advantage over ld that the correct flags are set - in the ELF header, as required by certain architectures. */ .section .init.ramfs,"a"
Quoted 1 line · Brian Gerst
Nothing uses
LDFLAGS_BLOBanymore, now that the arm binutils are fixed.
No it hasn't. We still have problems with ARM binutils. As I said at the time, forcing us to upgrade _will_ cause major problems.
Essentially, all ARM binutils post 2.11.90 to date remain broken in one way or another.
I should've been stronger to veto the obsolescence of 2.11.90 for kernel building.
Signature · 4 lines
Russell King
Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/
maintainer of: 2.6 PCMCIA - http://pcmcia.arm.linux.org.uk/
2.6 Serial coreNo, do not remove that initramfs_data.S section!
People with older binutils (like me) rely on it.
Make it obsolete on 2.7.x.
Quoted 48 lines · Brian Gerst
Nothing uses
LDFLAGS_BLOBanymore, now that the arm binutils are fixed.--
Brian Gerstdiff -urN linux-2.6.9-bk/arch/m32r/Makefile linux/arch/m32r/Makefile
arch/m32r/Makefile +0
-1@@ -5,7 +5,6 @@ LDFLAGS := OBJCOPYFLAGS := -O binary -R .note -R .comment -S LDFLAGS_vmlinux := -e startup_32 -LDFLAGS_BLOB := --format binary --oformat elf32-m32r CFLAGS += -pipe -fno-schedule-insns CFLAGS_KERNEL += -mmodel=mediumdiff -urN
linux-2.6.9-bk/usr/initramfs_data.Slinux/usr/initramfs_data.Susr/initramfs_data.S +0
-22@@ -1,28 +1,6 @@ /* initramfs_data includes the compressed binary that is the filesystem used for early user space. - Note: Older versions of "as" (prior to binutils 2.11.90.0.23 - released on 2001-07-14) dit not support .incbin. - If you are forced to use older binutils than that then the - following trick can be applied to create the resulting binary: - - - ld -m elf_i386 --format binary --oformat elf32-i386 -r \ - -T initramfs_data.scr initramfs_data.cpio.gz -o initramfs_data.o - ld -m elf_i386 -r -o built-in.o initramfs_data.o - - initramfs_data.scr looks like this: -SECTIONS -{ - .init.ramfs : { *(.data) } -} - - The above example is for i386 - the parameters vary from architectures. - Eventually look up LDFLAGS_BLOB in an older version of the - arch/$(ARCH)/Makefile to see the flags used before .incbin was introduced. - - Using .incbin has the advantage over ld that the correct flags are set - in the ELF header, as required by certain architectures. */ .section .init.ramfs,"a"
Quoted 2 lines · Marcelo Tosatti
No, do not remove that
initramfs_data.Ssection!
It's in a comment section??
Anyway for now I only removed the assignment in m32r Makefile.
Sam