Skip to contentSkip to conversation

is this scenario possible ???

LARTC Drink Linux 2 participants 3 messages Nov 16, 2004 – Nov 18, 2004

lore
Share & tools
lore
#0 lore raw

hello .

i have no problem shaping incoming traffic from WAN

how do i shape outgoing traffic to WAN depending on the speed limit of each subnet ....

ex:
10.10.6.0 --> 512kbps (DOWNLOAD / UPLOAD)
10.10.5.0 --> 256kbps (DOWNLOAD / UPLOAD)

do i have to used forward handle,

and used
iptables -s 10.10.6.0/24 -d WAN -j MARK --set-mark 101

and used
iptables -s 10.10.5.0/24 -d WAN -j MARK --set-mark 102

what do i really have to use?
prerouting or postrouting.
do i really need to use imq device on this one ?

i can't seem to get it work .....

thanks for anyone can help...

:D

__________________________________
Do you Yahoo!?
The all-new My Yahoo! - Get yours free!
http://my.yahoo.com

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 21 lines · Drink Linux

hello .

i have no problem shaping incoming traffic from WAN

how do i shape outgoing traffic to WAN depending on the speed limit of each subnet ....

ex:
10.10.6.0 --> 512kbps (DOWNLOAD / UPLOAD)
10.10.5.0 --> 256kbps (DOWNLOAD / UPLOAD)

do i have to used forward handle,

and used
iptables -s 10.10.6.0/24 -d WAN -j MARK --set-mark 101

and used
iptables -s 10.10.5.0/24 -d WAN -j MARK --set-mark 102

Quoted 7 lines

what do i really have to use?
prerouting or postrouting.
do i really need to use imq device on this one ?

i can't seem to get it work .....

thanks for anyone can help...

It depends on your exact setup - what interfaces do you have to where?

Andy.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to Drink Linux
Quoted 23 lines · Andy Furniss
Quoted 21 lines · Drink Linux

hello .

i have no problem shaping incoming traffic from WAN

how do i shape outgoing traffic to WAN depending on the speed limit of each subnet ....

ex:
10.10.6.0 --> 512kbps (DOWNLOAD / UPLOAD)
10.10.5.0 --> 256kbps (DOWNLOAD / UPLOAD)

do i have to used forward handle,
and used iptables -s 10.10.6.0/24 -d WAN -j MARK --set-mark 101

and used iptables -s 10.10.5.0/24 -d WAN -j MARK --set-mark 102

what do i really have to use? prerouting or postrouting. do i really need to use imq device on this one ?

Quoted 7 lines
Quoted 3 lines

i can't seem to get it work .....

thanks for anyone can help...

It depends on your exact setup - what interfaces do you have to where?

i have eth0 connected to WAN
and wlan0 connected to LAN ....

i have tried to used postrouting with mark packets but failed ....

You don't need IMQ as long as you only wan't to shape forwarded traffic.

It should work in postrouting, I think your -d WAN is the problem, you need to specify interface -o eth0. As you are marking forwarded traffic
you could use forward, and use -i as well as -o eg.

iptables -t mangle -I FORWARD -i wlan0 -o eth0 -s 10.10.5.0/24 -j MARK --set-mark 102

Andy.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/