is this scenario possible ???
hello .
i have no problem shaping incoming traffic from WAN
how do i shape outgoing traffic to WAN depending on the speed limit of each subnet ....
ex:
10.10.6.0 --> 512kbps (DOWNLOAD / UPLOAD)
10.10.5.0 --> 256kbps (DOWNLOAD / UPLOAD)
do i have to used forward handle,
and used
iptables -s 10.10.6.0/24 -d WAN -j MARK --set-mark 101
and used
iptables -s 10.10.5.0/24 -d WAN -j MARK --set-mark 102
what do i really have to use?
prerouting or postrouting.
do i really need to use imq device on this one ?
i can't seem to get it work .....
thanks for anyone can help...
:D
__________________________________
Do you Yahoo!?
The all-new My Yahoo! - Get yours free!
http://my.yahoo.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 21 lines · Drink Linux
hello .
i have no problem shaping incoming traffic from WAN
how do i shape outgoing traffic to WAN depending on the speed limit of each subnet ....
ex:
10.10.6.0 --> 512kbps (DOWNLOAD / UPLOAD)
10.10.5.0 --> 256kbps (DOWNLOAD / UPLOAD)do i have to used forward handle,
and used
iptables -s 10.10.6.0/24 -d WAN -j MARK --set-mark 101and used
iptables -s 10.10.5.0/24 -d WAN -j MARK --set-mark 102
Quoted 7 lines
what do i really have to use?
prerouting or postrouting.
do i really need to use imq device on this one ?i can't seem to get it work .....
thanks for anyone can help...
It depends on your exact setup - what interfaces do you have to where?
Andy.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 23 lines · Andy Furniss
Quoted 21 lines · Drink Linux
hello .
i have no problem shaping incoming traffic from WAN
how do i shape outgoing traffic to WAN depending on the speed limit of each subnet ....
ex:
10.10.6.0 --> 512kbps (DOWNLOAD / UPLOAD)
10.10.5.0 --> 256kbps (DOWNLOAD / UPLOAD)do i have to used forward handle,
and used iptables -s 10.10.6.0/24 -d WAN -j MARK --set-mark 101and used iptables -s 10.10.5.0/24 -d WAN -j MARK --set-mark 102
what do i really have to use? prerouting or postrouting. do i really need to use imq device on this one ?
Quoted 7 lines
Quoted 3 lines
i can't seem to get it work .....
thanks for anyone can help...
It depends on your exact setup - what interfaces do you have to where?
i have eth0 connected to WAN
and wlan0 connected to LAN ....
i have tried to used postrouting with mark packets but failed ....
You don't need IMQ as long as you only wan't to shape forwarded traffic.
It should work in postrouting, I think your -d WAN is the problem, you need to specify interface -o eth0. As you are marking forwarded traffic
you could use forward, and use -i as well as -o eg.
iptables -t mangle -I FORWARD -i wlan0 -o eth0 -s 10.10.5.0/24 -j MARK --set-mark 102
Andy.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/