Dynamic traffic shaping or ATM like classes
Is it possible to dynamically do bandwidh reservation?
That is, I want to limit the traffic to 50% for upload and download, but if there aren't onbound traffic, who is doing a download will get 100% of bandwidh and if there aren't inbound traffic, who is doing a upload will get 100%, but if there are both inbound and outbount traffic, each one get limited to 50%.
I think this is similar to ATM classes _with a twist_. I could put download ATM traffic in VBR(Variable Bit Rate), and put upload in ABR (Available Bit Rate). If there aren't VBR traffic, ABR could use the full bandwidth.
Thanks,
Tiago
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 9 lines · tiago schreiner
Is it possible to dynamically do bandwidh reservation?
That is, I want to limit the traffic to 50% for upload and download, but if there aren't onbound traffic, who is doing a download will get 100% of bandwidh and if there aren't inbound traffic, who is doing a upload will get 100%, but if there are both inbound and outbount traffic, each one get limited to 50%.
So you want to shape for a half duplex link ?
Andy.
Quoted 5 lines
I think this is similar to ATM classes
_withatwist_. I could put download ATM traffic in VBR(Variable Bit Rate), and put upload in ABR (Available Bit Rate). If there aren't VBR traffic, ABR could use the full bandwidth.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/