Skip to contentSkip to conversation

Dynamic traffic shaping or ATM like classes

LARTC tiago schreiner 2 participants 2 messages Nov 16, 2004 – Nov 17, 2004

lore
Share & tools
lore
#0 lore raw

Is it possible to dynamically do bandwidh reservation?

That is, I want to limit the traffic to 50% for upload and download, but if there aren't onbound traffic, who is doing a download will get 100% of bandwidh and if there aren't inbound traffic, who is doing a upload will get 100%, but if there are both inbound and outbount traffic, each one get limited to 50%.

I think this is similar to ATM classes _with a twist_. I could put download ATM traffic in VBR(Variable Bit Rate), and put upload in ABR (Available Bit Rate). If there aren't VBR traffic, ABR could use the full bandwidth.

Thanks,

Tiago

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 9 lines · tiago schreiner

Is it possible to dynamically do bandwidh reservation?

That is, I want to limit the traffic to 50% for upload and download, but if there aren't onbound traffic, who is doing a download will get 100% of bandwidh and if there aren't inbound traffic, who is doing a upload will get 100%, but if there are both inbound and outbount traffic, each one get limited to 50%.

So you want to shape for a half duplex link ?

Andy.

Quoted 5 lines

I think this is similar to ATM classes _with a twist_. I could put download ATM traffic in VBR(Variable Bit Rate), and put upload in ABR (Available Bit Rate). If there aren't VBR traffic, ABR could use the full bandwidth.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/