Don't work pppd.
Quoted 6 lines · Kirill Yushkov
Quoted 4 lines
My VPN server on the base Poptop (pptpd) failed to work after the upgrade of the kernel from 2.6.10-rc2-bk1 to 2.6.10-rc3. In kernel 2.6.10-rc2-bk1 and earlier versions the kernel pppd worked well.
Quoted 6 lines
I see no changes to the ppp drivers,
pty driver, or tty code between these versions.It would help to recheck your setup and configuration and then work through the rc2-bk series to identify more precisely when this broke.
I've got the same problem but with pptp-client (pptpclient.sf.net). I did a binary search and found that with the same kernel and pptp config, kernel 2.6.10-rc2-bk13 works, and 2.6.10-rc2-bk14 doesn't. Hope that helps to narrow it down. Let me know if there is anything I can try.
Ronald.
Quoted 4 lines · Ronald Moesbergen
I've got the same problem but with pptp-client (pptpclient.sf.net). I did a binary search and found that with the same kernel and pptp config, kernel 2.6.10-rc2-bk13 works, and 2.6.10-rc2-bk14 doesn't. Hope that helps to narrow it down. Let me know if there is anything I can try.
Read the archives...a patch was submitted to fix this today -- look for select().
Phil
Quoted 7 lines · Phil Oester
Quoted 1 line · Ronald Moesbergen
I've got the same problem but with pptp-client (pptpclient.sf.net). I did a binary search and found that with the same kernel and pptp config, kernel 2.6.10-rc2-bk13 works, and 2.6.10-rc2-bk14 doesn't. Hope that helps to narrow it down. Let me know if there is anything I can try.
Read the archives...a patch was submitted to fix this today -- look for
select().
To be fair it was submitted under a different thread. :-)
Summary: It was a net code change affecting pptp and not directly related to the PPP/pty/tty code.
--
Paul Fulghum
[email protected]