Skip to contentSkip to conversation

Don't work pppd.

ppp Ronald Moesbergen 3 participants 3 messages Dec 7, 2004

lore
Share & tools
lore
#0 lore raw
Quoted 6 lines · Kirill Yushkov
Quoted 4 lines

My VPN server on the base Poptop (pptpd) failed to work after the upgrade of the kernel from 2.6.10-rc2-bk1 to 2.6.10-rc3. In kernel 2.6.10-rc2-bk1 and earlier versions the kernel pppd worked well.

Quoted 6 lines

I see no changes to the ppp drivers,
pty driver, or tty code between these versions.

It would help to recheck your setup and configuration and then work through the rc2-bk series to identify more precisely when this broke.

I've got the same problem but with pptp-client (pptpclient.sf.net). I did a binary search and found that with the same kernel and pptp config, kernel 2.6.10-rc2-bk13 works, and 2.6.10-rc2-bk14 doesn't. Hope that helps to narrow it down. Let me know if there is anything I can try.

Ronald.

#1 lore raw
Quoted 4 lines · Ronald Moesbergen

I've got the same problem but with pptp-client (pptpclient.sf.net). I did a binary search and found that with the same kernel and pptp config, kernel 2.6.10-rc2-bk13 works, and 2.6.10-rc2-bk14 doesn't. Hope that helps to narrow it down. Let me know if there is anything I can try.

Read the archives...a patch was submitted to fix this today -- look for select().

Phil

#2 lore raw
Quoted 7 lines · Phil Oester
Quoted 1 line · Ronald Moesbergen

I've got the same problem but with pptp-client (pptpclient.sf.net). I did a binary search and found that with the same kernel and pptp config, kernel 2.6.10-rc2-bk13 works, and 2.6.10-rc2-bk14 doesn't. Hope that helps to narrow it down. Let me know if there is anything I can try.

Read the archives...a patch was submitted to fix this today -- look for select().

To be fair it was submitted under a different thread. :-)

Summary: It was a net code change affecting pptp and not directly related to the PPP/pty/tty code.

--
Paul Fulghum
[email protected]