Skip to contentSkip to conversation

Shaping over multiple outgoing interfaces

LARTC Miguel Sanz 2 participants 2 messages Dec 20, 2004 – Dec 22, 2004

lore
Share & tools
lore
#0 lore raw

Hi,

I've a router configuration with a dsl connection and two ethernet NICs. How can I control the traffic of the dsl connection when then destination of the traffic can go out of the router using two diferent interfaces?

ppp -- router --- lan

             |
          DMZ

I've read that the solution could be IMQ, but i prefer to not to patch kernel and iptables. Any suggestions?

Thanks in advance

---------------------------------

#1 lore raw
Quoted 6 lines · Miguel Sanz

Hi,

I've a router configuration with a dsl connection and two ethernet NICs. How can I control the traffic of the dsl connection when then destination of the traffic can go out of the router using two diferent interfaces?

Quoted 6 lines

ppp -- router --- lan

DMZ

I've read that the solution could be IMQ, but i prefer to not to patch kernel and iptables. Any suggestions?

You can use a second machine:
pppp -> shaper > router-> lan

                    |
                   DMZ

The shaper can be a bridge so you don't have to change your network setup.

Stef

Signature · 6 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/