Skip to contentSkip to conversation

tc filter change/replace

LARTC Antonios Chalkiopoulos 3 participants 4 messages Jan 24, 2005 – Jan 28, 2005

lore
Share & tools
lore
#0 lore raw

I am wondering whether the commands 'tc filter change' and 'tc filter replace' are working. Googling around revealed a few emails on the LARTC stating that unfoirtunately they do not work. A quick check showed that they are still not implemented (properly).
Some propose a solution to build a second tree of filters and apply the 2nd one when a need for it arises. Howver how can someone achive the above trick.

Any answer is welcomew.

Thanks, Antonio & Alex
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

* Antonios Chalkiopoulos <[email protected]> 2005-01-24 14:02

Quoted 7 lines

I am wondering whether the commands 'tc filter change' and 'tc filter replace' are working. Googling around revealed a few emails on the LARTC stating that unfoirtunately they do not work. A quick check showed that they are still not implemented (properly).
Some propose a solution to build a second tree of filters and apply the 2nd one when a need for it arises. Howver how can someone achive the above trick.

All classifiers except rsvp are changeable in the latest bk. The patchset has gone in around rc1-bk3-5.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to Antonios Chalkiopoulos

Tomas Graf:

You mentioned that "All classifier except rsvp are changeable in the
latest bk. The patchset has gone in around rc1-bk3-5"

Well issue 1 is that in iproute-latest (as well as the one released
yesterday) the output of: tc show filter dev eth0 parent ffff:"
and change/replace DO NOT WORK.
-----------------------------------------------------------------------
filter protocol ip pref 50 u32 fh 800::801 order 2049 ht 800 bkt 0 match
0a010102/ffffffff at 12 police 0x4 rate 20000bit burst 2559b mtu 2kb
action reclassify ref -10352222812 bind -8666697856

on the bk version (latest changeLog entry 18-1-2005) as you suggested
the output is NOT VERBOSE ENOUGH to see if all parameters are working,
but change/replace SEEM TO BE WORKING.

Heres the output:

filter protocol ip pref 50 u32 fh 800::801 order 2049 ht 800 bkt 0 match
0a010102/ffffffff at 12

ISSUE 2
-------
In lots of computers i try to install iproute2 i get an error about
db_185.h missing . Issuing a simple

apt-get install libdb4.1-dev

resolves the problem and the arpd compiles perfectly. Maybe consider
documenting that somewhere.

Quoted 16 lines · --- Thomas Graf

* Antonios Chalkiopoulos
<[email protected]>
2005-01-24 14:02

Quoted 2 lines

I am wondering whether the commands 'tc filter

change' and 'tc filter replace'

Quoted 1 line

are working. Googling around revealed a few emails

on the LARTC stating that

Quoted 1 line

unfoirtunately they do not work. A quick check

showed that they are still not

Quoted 2 lines

implemented (properly).
Some propose a solution to build a second tree of

filters and apply the 2nd

Quoted 1 line

one when a need for it arises. Howver how can

someone achive the above trick.

Quoted 8 lines

All classifiers except rsvp are changeable in the latest bk. The
patchset has gone in around rc1-bk3-5.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO:
http://lartc.org/

__________________________________
Do you Yahoo!?
Take Yahoo! Mail with you! Get it on your mobile phone.
http://mobile.yahoo.com/maildemo
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#3 lore raw
In reply to Antonios Chalkiopoulos

Tomas Graf:

You mentioned that "All classifier except rsvp are changeable in the
latest bk. The patchset has gone in around rc1-bk3-5"

Well issue 1 is that in iproute-latest (as well as the
one released
yesterday) the output of: tc show filter dev eth0 parent ffff:"
and change/replace DO NOT WORK.

-----------------------------------------------------------------------
filter protocol ip pref 50 u32 fh 800::801 order 2049
ht 800 bkt 0 match
0a010102/ffffffff at 12 police 0x4 rate 20000bit burst
2559b mtu 2kb
action reclassify ref -10352222812 bind -8666697856

on the bk version (latest changeLog entry 18-1-2005) as you suggested
the output is NOT VERBOSE ENOUGH to see if all parameters are working,
but change/replace SEEM TO BE WORKING.

Heres the output:

filter protocol ip pref 50 u32 fh 800::801 order
2049
ht 800 bkt 0 match
0a010102/ffffffff at 12

ISSUE 2
-------
In lots of computers i try to install iproute2 i get an error about
db_185.h missing . Issuing a simple

apt-get install libdb4.1-dev

resolves the problem and the arpd compiles
perfectly.
Maybe consider
documenting that somewhere.

__________________________________
Do you Yahoo!?
Meet the all-new My Yahoo! - Try it today!
http://my.yahoo.com

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/