tc filter change/replace
I am wondering whether the commands 'tc filter change' and 'tc filter replace' are working. Googling around revealed a few emails on the LARTC stating that unfoirtunately they do not work. A quick check showed that they are still not implemented (properly).
Some propose a solution to build a second tree of filters and apply the 2nd one when a need for it arises. Howver how can someone achive the above trick.
Any answer is welcomew.
Thanks, Antonio & Alex
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
* Antonios Chalkiopoulos <[email protected]> 2005-01-24 14:02
Quoted 7 lines
I am wondering whether the commands 'tc filter change' and 'tc filter replace' are working. Googling around revealed a few emails on the LARTC stating that unfoirtunately they do not work. A quick check showed that they are still not implemented (properly).
Some propose a solution to build a second tree of filters and apply the 2nd one when a need for it arises. Howver how can someone achive the above trick.
All classifiers except rsvp are changeable in the latest bk. The patchset has gone in around rc1-bk3-5.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Tomas Graf:
You mentioned that "All classifier except rsvp are changeable in the
latest bk. The patchset has gone in around rc1-bk3-5"
Well issue 1 is that in iproute-latest (as well as the one released
yesterday) the output of: tc show filter dev eth0 parent ffff:"
and change/replace DO NOT WORK.
-----------------------------------------------------------------------
filter protocol ip pref 50 u32 fh 800::801 order 2049 ht 800 bkt 0 match
0a010102/ffffffff at 12 police 0x4 rate 20000bit burst 2559b mtu 2kb
action reclassify ref -10352222812 bind -8666697856
on the bk version (latest changeLog entry 18-1-2005) as you suggested
the output is NOT VERBOSE ENOUGH to see if all parameters are working,
but change/replace SEEM TO BE WORKING.
Heres the output:
filter protocol ip pref 50 u32 fh 800::801 order 2049 ht 800 bkt 0 match
0a010102/ffffffff at 12
ISSUE 2
-------
In lots of computers i try to install iproute2 i get an error aboutdb_185.h missing . Issuing a simple
apt-get install libdb4.1-dev
resolves the problem and the arpd compiles perfectly. Maybe consider
documenting that somewhere.
Quoted 16 lines · --- Thomas Graf
* Antonios Chalkiopoulos
<[email protected]>
2005-01-24 14:02Quoted 2 lines
I am wondering whether the commands 'tc filter
change' and 'tc filter replace'
Quoted 1 line
are working. Googling around revealed a few emails
on the LARTC stating that
Quoted 1 line
unfoirtunately they do not work. A quick check
showed that they are still not
Quoted 2 lines
implemented (properly).
Some propose a solution to build a second tree offilters and apply the 2nd
Quoted 1 line
one when a need for it arises. Howver how can
someone achive the above trick.
Quoted 8 lines
All classifiers except rsvp are changeable in the latest bk. The
patchset has gone in around rc1-bk3-5.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO:
http://lartc.org/
__________________________________
Do you Yahoo!?
Take Yahoo! Mail with you! Get it on your mobile phone.
http://mobile.yahoo.com/maildemo
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Tomas Graf:
You mentioned that "All classifier except rsvp are changeable in the
latest bk. The patchset has gone in around rc1-bk3-5"
Well issue 1 is that in iproute-latest (as well as the
one released
yesterday) the output of: tc show filter dev eth0 parent ffff:"
and change/replace DO NOT WORK.
-----------------------------------------------------------------------
filter protocol ip pref 50 u32 fh 800::801 order 2049
ht 800 bkt 0 match
0a010102/ffffffff at 12 police 0x4 rate 20000bit burst
2559b mtu 2kb
action reclassify ref -10352222812 bind -8666697856
on the bk version (latest changeLog entry 18-1-2005) as you suggested
the output is NOT VERBOSE ENOUGH to see if all parameters are working,
but change/replace SEEM TO BE WORKING.
Heres the output:
filter protocol ip pref 50 u32 fh 800::801 order
2049
ht 800 bkt 0 match
0a010102/ffffffff at 12
ISSUE 2
-------
In lots of computers i try to install iproute2 i get an error about
db_185.h missing . Issuing a simple
apt-get install libdb4.1-dev
resolves the problem and the arpd compiles
perfectly.
Maybe consider
documenting that somewhere.
__________________________________
Do you Yahoo!?
Meet the all-new My Yahoo! - Try it today!
http://my.yahoo.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/