Skip to contentSkip to conversation

parport disabled?

DISCUSSION [email protected] 2 participants 3 messages Jan 27, 2005 – Jan 28, 2005

lore
Share & tools
lore
#0 lore raw

Hi,

Quoted 10 lines

Whenever I "modprobe parport_pc", I get this message:

Jan 27 10:55:47 hummus kernel: pnp: Device 00:0b activated.
Jan 27 10:55:47 hummus kernel: parport: PnPBIOS parport detected.
Jan 27 10:55:47 hummus kernel: pnp: Device 00:0b disabled.

and the parallel port is unusable ever after.
This is with Kernel 2.6.10-ac10 and 2.6.10-ac11

How can I make my parallel port usable again?

Try disabling acpi.

If it works, with acpi enabled send a "for i in /sys/bus/pnp/devices/*; do cat $i/*; done"

I could be related to http://bugzilla.kernel.org/show_bug.cgi?id=3912
and [1]

regards,

Matthieu

Quoted 40 lines · Adam Belay
Quoted 20 lines · matthieu castet
Quoted 18 lines · matthieu castet

Hello,

acpi need that the order of the resources are the same as the possible resources. It could be the same for pnpbios.

I most of case, it works quite well, but if the independent options are after dependent, it doesn't work :
in pnp manager, pnp_assign_resources first uses independent_options and then dependent ones. So we break the order, and it doesn't work.

What the rules for independent options in pnpbios ?

If it works like pnpacpi, it is allowed to define them only before or after dependent option.

So a solution could be to have a second independent option, and use it after dependent options in pnp_assign_resources.

Quoted 7 lines
Quoted 4 lines

What do you think of that ?

Matthieu CASTET

I forgot to say that it is probably the bug of meelis roos.

Hmm, I agree this is a problem, and it will be interesting to see if it
resolves Meelis's issue. I don't think a second independent option would be a
clean solution. I think the a slight redesign is in order, with a focus on
ensuring resources are assigned in the order they are advertised in all cases.
I'm hacking something together now.

#1 lore raw

* [email protected] <[email protected]>:

Quoted 6 lines
Quoted 6 lines

Whenever I "modprobe parport_pc", I get this message:

Jan 27 10:55:47 hummus kernel: pnp: Device 00:0b activated.
Jan 27 10:55:47 hummus kernel: parport: PnPBIOS parport detected.
Jan 27 10:55:47 hummus kernel: pnp: Device 00:0b disabled.
Quoted 6 lines
Quoted 4 lines

and the parallel port is unusable ever after.
This is with Kernel 2.6.10-ac10 and 2.6.10-ac11

How can I make my parallel port usable again?

Try disabling acpi.

Didn't help. Same symptom

Signature · 4 lines
Ralf Hildebrandt (i.A. des IT-Zentrum)          [email protected]
Charite - Universitätsmedizin Berlin            Tel.  +49 (0)30-450 570-155
Gemeinsame Einrichtung von FU- und HU-Berlin    Fax.  +49 (0)30-450 570-962
IT-Zentrum Standort CBF                 send no mail to [email protected]
#2 lore raw

* Ralf Hildebrandt <[email protected]>:

Quoted 3 lines
Quoted 1 line

Try disabling acpi.

Didn't help. Same symptom

I was able to make it work by going to the BIOS and set the IO & IRQ there.

Signature · 4 lines
Ralf Hildebrandt (i.A. des IT-Zentrum)          [email protected]
Charite - Universitätsmedizin Berlin            Tel.  +49 (0)30-450 570-155
Gemeinsame Einrichtung von FU- und HU-Berlin    Fax.  +49 (0)30-450 570-962
IT-Zentrum Standort CBF                 send no mail to [email protected]