parport disabled?
Hi,
Quoted 10 lines
Whenever I "modprobe
parport_pc", I get this message:Jan 27 10:55:47 hummus kernel: pnp: Device 00:0b activated. Jan 27 10:55:47 hummus kernel: parport: PnPBIOS parport detected. Jan 27 10:55:47 hummus kernel: pnp: Device 00:0b disabled.and the parallel port is unusable ever after.
This is with Kernel 2.6.10-ac10 and 2.6.10-ac11How can I make my parallel port usable again?
Try disabling acpi.
If it works, with acpi enabled send a "for i in /sys/bus/pnp/devices/*; do cat $i/*; done"
I could be related to http://bugzilla.kernel.org/show_bug.cgi?id=3912
and [1]
regards,
Matthieu
Quoted 40 lines · Adam Belay
Quoted 20 lines · matthieu castet
Quoted 18 lines · matthieu castet
Hello,
acpi need that the order of the resources are the same as the possible resources. It could be the same for pnpbios.
I most of case, it works quite well, but if the independent options are after dependent, it doesn't work :
in pnp manager,pnp_assign_resourcesfirst usesindependent_optionsand then dependent ones. So we break the order, and it doesn't work.What the rules for independent options in pnpbios ?
If it works like pnpacpi, it is allowed to define them only before or after dependent option.
So a solution could be to have a second independent option, and use it after dependent options in
pnp_assign_resources.Quoted 7 lines
Quoted 4 lines
What do you think of that ?
Matthieu CASTET
I forgot to say that it is probably the bug of meelis roos.
Hmm, I agree this is a problem, and it will be interesting to see if it
resolves Meelis's issue. I don't think a second independent option would be a
clean solution. I think the a slight redesign is in order, with a focus on
ensuring resources are assigned in the order they are advertised in all cases.
I'm hacking something together now.
* [email protected] <[email protected]>:
Quoted 6 lines
Quoted 6 lines
Whenever I "modprobe
parport_pc", I get this message:Jan 27 10:55:47 hummus kernel: pnp: Device 00:0b activated. Jan 27 10:55:47 hummus kernel: parport: PnPBIOS parport detected. Jan 27 10:55:47 hummus kernel: pnp: Device 00:0b disabled.
Quoted 6 lines
Quoted 4 lines
and the parallel port is unusable ever after.
This is with Kernel 2.6.10-ac10 and 2.6.10-ac11How can I make my parallel port usable again?
Try disabling acpi.
Didn't help. Same symptom
Signature · 4 lines
Ralf Hildebrandt (i.A. des IT-Zentrum) [email protected] Charite - Universitätsmedizin Berlin Tel. +49 (0)30-450 570-155 Gemeinsame Einrichtung von FU- und HU-Berlin Fax. +49 (0)30-450 570-962 IT-Zentrum Standort CBF send no mail to [email protected]
* Ralf Hildebrandt <[email protected]>:
Quoted 3 lines
Quoted 1 line
Try disabling acpi.
Didn't help. Same symptom
I was able to make it work by going to the BIOS and set the IO & IRQ there.
Signature · 4 lines
Ralf Hildebrandt (i.A. des IT-Zentrum) [email protected] Charite - Universitätsmedizin Berlin Tel. +49 (0)30-450 570-155 Gemeinsame Einrichtung von FU- und HU-Berlin Fax. +49 (0)30-450 570-962 IT-Zentrum Standort CBF send no mail to [email protected]