omap2420h4 u-boot debugging CCS JTAG
Richard,
I am trying to debug the omap2420h4 board u-boot through Code Composer Studio and xds560 JTAG.
I have compiled u-boot with CONFIG_PARTIAL_SRAM option.
CCS unable to debug after the STR instruction as "sp" becomes zero:
file: board/omap2420h4/platform.S:
----------------------------------
#ifdef CONFIG_PARTIAL_SRAM
ldr sp, SRAM_STACK
str ip, [sp] /* stash old linkregister */
mov ip, lr /* save link reg
across call */
...
SRAM_STACK:
.word LOW_LEVEL_SRAM_STACK
Where LOW_LEVEL_SRAM_STACK equals to 0x4020FFFC .
As per the observation of registers and assembly code in CCS:
---------------snip-------------------
80E80570 01832100 ORREQ R2, R3, R0, LSL #2 80E80574 E1A03000 MOV R3, R0, R0 80E80578 E59FD028 LDR R13, 0x80E805A8 80E8057C E58DC000 STR R12, [R13] 80E80580 E1A0C00E MOV R12, R0, R14
---------------snip-------------------
Where value of R13 becomes zero. And due to that it is failing at "STR R12, [R13]".
This seems to me the problem in accessing SRAM. Any hints on debugging the u-boot on the above case would be usefull for me on porting this code to the board based on similar core (omap2420).
=====
---Komal Shah
__________________________________
Do you Yahoo!?
Yahoo! Mail - Easier than ever with enhanced search. Learn more.
http://info.mail.yahoo.com/mail_250