Skip to contentSkip to conversation

omap2420h4 u-boot debugging CCS JTAG

U-Boot-Users Komal Shah 1 participant 1 message Feb 2, 2005

lore
Share & tools
lore

Komal Shah

author
#0 lore raw

Richard,

I am trying to debug the omap2420h4 board u-boot through Code Composer Studio and xds560 JTAG.

I have compiled u-boot with CONFIG_PARTIAL_SRAM option.

CCS unable to debug after the STR instruction as "sp" becomes zero:

file: board/omap2420h4/platform.S:
----------------------------------

#ifdef CONFIG_PARTIAL_SRAM

        ldr     sp,     SRAM_STACK
        str     ip,     [sp]    /* stash old link

register */
mov ip, lr /* save link reg
across call */
...

SRAM_STACK:
.word LOW_LEVEL_SRAM_STACK

Where LOW_LEVEL_SRAM_STACK equals to 0x4020FFFC .

As per the observation of registers and assembly code in CCS:
---------------snip-------------------

80E80570 01832100 ORREQ     R2, R3, R0, LSL #2
80E80574 E1A03000 MOV       R3, R0, R0
80E80578 E59FD028 LDR       R13, 0x80E805A8
80E8057C E58DC000 STR       R12, [R13]
80E80580 E1A0C00E MOV       R12, R0, R14

---------------snip-------------------

Where value of R13 becomes zero. And due to that it is failing at "STR R12, [R13]".

This seems to me the problem in accessing SRAM. Any hints on debugging the u-boot on the above case would be usefull for me on porting this code to the board based on similar core (omap2420).

=====
---Komal Shah

__________________________________
Do you Yahoo!?
Yahoo! Mail - Easier than ever with enhanced search. Learn more.
http://info.mail.yahoo.com/mail_250