Skip to contentSkip to conversation

These tc commands used to work... what's broken them?

LARTC George Adams 4 participants 4 messages Mar 25, 2005 – Apr 1, 2005

lore
Share & tools
lore
#0 lore raw

I have a Gentoo Linux (kernel 2.6.11) server. Several months ago, I made a traffic shaping setup for my box (running a 2.4 kernel then) that worked beautifully. It gave high priority to SSH and RealAudio traffic, and put HTTP downloading traffic on a lower prio so they could only use what bandwidth was left.

However, I've only just realized that tc is no longer accepting the commands I setup in a script to start it. I don't know when it stopped working.

I can post the tcng script if anyone wants to see how I generated my tc commands, but I suspect it may not be relevant since tc is bombing out so early in the process. Here's what I get:

------------------------------------------------------------

Quoted 1 line

tc -s qdisc show dev eth0

qdisc pfifo_fast 0: bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1
Sent 455120063 bytes 553706 pkt (dropped 0, overlimits 0 requeues 25) rate 0bit 0pps backlog 0b 0p requeues 25

Quoted 3 lines

tc -s class show dev eth0

tc qdisc add dev eth0 handle 1:0 root dsmark indices 8 default_index 0

RTNETLINK answers: Invalid argument
------------------------------------------------------------

Now this is such a basic command... and yet tc is already choking on it. If I try something else, like this random example, then it works:

------------------------------------------------------------

Quoted 3 lines

tc qdisc add dev eth0 handle 1:0 root cbq bandwidth 90000bps avpkt 1000

tc -s class show dev eth0

class cbq 1: root rate 720000bit (bounded,isolated) prio no-transmit
Sent 19872 bytes 36 pkt (dropped 0, overlimits 0 requeues 0) rate 0bit 0pps backlog 0b 0p requeues 0
borrowed 0 overactions 0 avgidle 11377 undertime 0
------------------------------------------------------------

Ok, so I said to myself "Aha, maybe when Gentoo upgraded its iproute2 package not too long ago, it didn't compile in DSMARK support that the old iproute2 had!" So I dug into the iproute2 package. But as best I can tell, the latest iproute2 (at least the Gentoo variant) doesn't even need the old TC_CONFIG_DIFFSERV=y directive in the Config file any more. It appears to compile dsmark support in in by default. Just to check, I tried this:

Quoted 1 line

strings /sbin/tc | grep dsmark

dsmark_qdisc_util
dsmark
dsmark: indices too short
dsmark: empty mask
dsmark: empty value
Usage: dsmark indices INDICES [ default_index DEFAULT_INDEX ] [ set_tc_index ]
Usage: ... dsmark [ mask MASK ] [ value VALUE ]
dsmark: default_index too short

So, it definitely looks like dsmark support is in there...

Next I thought "Maybe I forgot to compile in dsmark support when I upgraded from a 2.4 to 2.6 kernel". But no, that doesn't seem to be the case:

Device Drivers ->
Networking Support ->
Networking Options ->
QoS and/or fair queueing ->

[*] QoS and/or fair queueing
<M> CBQ packet scheduler
<M> HTB packet scheduler
<M> HFSC packet scheduler
<M> The simplest PRIO pseudoscheduler
<M> RED queue
<M> SFQ queue
<M> TEQL queue
<M> TBF queue
<M> GRED queue
<M> Diffserv field marker
<M> Network emulator
<M> Ingress Qdisc
[*] QoS support
[*] Rate estimator
[*] Packet classifier API
<M> TC index classifier
<M> Routing table based classifier
<M> Firewall based classifier
<M> U32 classifier
[ ] U32 classifier performance counters
[ ] classify input device (slows things u32/fw) [ ] Use nfmark as a key in U32 classifier <M> Special RSVP classifier
<M> Special RSVP classifier for IPv6
[ ] Packet ACTION
[*] Traffic policing (needed for in/egress)

So I'm stumped. Can anyone see anything obvious that would cause tc to be choking on commands that used to work fine?

I'll be happy to provide any further information (tcng script, full list of tc commands, etc.) if it'll help. I hope someone has an idea, because I don't know where else to look.
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

#1 lore raw
Quoted 6 lines · George Adams

I have a Gentoo Linux (kernel 2.6.11) server. Several months ago, I made a traffic shaping setup for my box (running a 2.4 kernel then) that worked beautifully. It gave high priority to SSH and RealAudio traffic, and put HTTP downloading traffic on a lower prio so they could only use what bandwidth was left.

I'm not familiar with Gentoo or dsmark so I can only give you a very general answer. Someone else might know more.

Try compiling iproute2 from http://developer.osdl.org/dev/iproute2/. You
don't necessarily need to 'make install'; just test by running the new
tc binary in the source tree.

Try compiling a vanilla kernel from http://www.kernel.org/, if you aren't running one already.

Try various combinations and see if you can find one that works. You want to determine if this is a Gentoo-specific problem. If it is, you should report your bug to the respective Gentoo package maintainer(s). If it isn't a Gentoo problem, you can report it upstream to whomever it concerns.

-Corey
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

#2 lore raw
In reply to George Adams

* George Adams <[email protected]> 2005-03-25 17:03

Quoted 3 lines
Quoted 1 line

tc qdisc add dev eth0 handle 1:0 root dsmark indices 8 default_index 0

RTNETLINK answers: Invalid argument

This has been fixed in the latest version which is

http://developer.osdl.org/shemminger/iproute2/download/iproute2-2.6.11-050330.tar.gz

The bug was pretty old but was hidden until some recent changes.
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

#3 lore raw
In reply to George Adams
Quoted 14 lines · George Adams

I have a Gentoo Linux (kernel 2.6.11) server. Several months ago, I made a traffic shaping setup for my box (running a 2.4 kernel then) that worked beautifully. It gave high priority to SSH and RealAudio traffic, and put HTTP downloading traffic on a lower prio so they could only use what bandwidth was left.

However, I've only just realized that tc is no longer accepting the commands I setup in a script to start it. I don't know when it stopped working.

I can post the tcng script if anyone wants to see how I generated my tc commands, but I suspect it may not be relevant since tc is bombing out so early in the process. Here's what I get:

Quoted 14 lines

------------------------------------------------------------

Quoted 1 line

tc -s qdisc show dev eth0

qdisc pfifo_fast 0: bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1
Sent 455120063 bytes 553706 pkt (dropped 0, overlimits 0 requeues 25) rate 0bit 0pps backlog 0b 0p requeues 25

Quoted 4 lines

tc -s class show dev eth0

tc qdisc add dev eth0 handle 1:0 root dsmark indices 8 default_index 0

That works for me using the latest iproute2 and 2.6.12-rc1 I think you just hit unlucky with your version/kernel and it's been fixed now.

http://developer.osdl.org/dev/iproute2/download/iproute2-2.6.11-050330.tar.gz

Andy.
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc