[2.6.8] OOPS and SIGSEGV on altivec instruction on PowerPC 7540.
Hi,
simple runtime altivec detection from userspace causes an oops on the vand instruction. kernel was built *without* CONFIG_ALTIVEC. i think kernel should return a SIGILL instead of an oops ;-)
Oops: kernel access of bad area, sig: 11 [#65] NIP: C0008B84 LR: C0007F2C SP: CF373F20 REGS: cf373e70 TRAP: 0300 Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000088, DSISR: 40000000
TASK = c81e04f0[12983] 'altivec' THREAD: cf372000Last syscall: 174
GPR00: C0007F2C CF373F20 C81E04F0 00000004 00000004 00030001 00000000 0FEE08D0
GPR08: 0000F932 C0007F2C 00009032 C0350000 081E0788 00000000 00000000 100A37D8
GPR16: 100A0000 00000000 100A0000 00000000 10070000 100A37C8 100AEF08 00000000
GPR24: 100A1108 00000000 100A59A8 3002AEF8 3002BB80 3002AE60 0FFEA6FC 00000004
Call trace: [c0007f2c]
processor : 0
cpu : 7450
clock : 700MHz
revision : 2.1 (pvr 8000 0201)
bogomips : 696.32
machine : PowerMac4,4
motherboard : PowerMac4,4 MacRISC2 MacRISC Power Macintosh detected as : 80 (eMac)
pmac flags : 00000001
L2 cache : 256K unified
memory : 384MB
pmac-generation : NewWorld
Signature · 3 lines
The only thing necessary for the triumph of evil
is for good men to do nothing.
- Edmund Burke#include <setjmp.h>
#include <signal.h>
static sigjmp_buf jmpbuf;
static volatile sig_atomic_t canjump = 0;
void sigill_handler(int sig)
{
if (!canjump)
{
signal(sig, SIG_DFL);
raise(sig);
}
canjump = 0;
siglongjmp(jmpbuf, 1);
}int arch_accel()
{
signal(SIGILL, sigill_handler);
if (sigsetjmp(jmpbuf, 1))
{
signal(SIGILL, SIG_DFL);
return 0;
}
canjump = 1;
asm volatile
(
"mtspr 256, %0 \n\t"
"vand %%v0, %%v0, %%v0 \n\t"
:
: "r" (-1)
);
signal(SIGILL, SIG_DFL);
return 1;
}int main(int argc, char** argv)
{
return arch_accel();
}This is odd. the 2.6.8 kernel should have the code that causes a SIGILL=20=
if !CONFIG_ALTIVEC. Can you enable CONFIG_KALLSYMS.
- kumar
Quoted 42 lines · Pawel Sikora
Hi,
simple runtime altivec detection from userspace causes an oops
on thevandinstruction. kernel was built *without*CONFIG_ALTIVEC.
i think kernel should return a SIGILL instead of an oops ;-)Oops: kernel access of bad area, sig: 11 [#65] NIP: C0008B84 LR: C0007F2C SP: CF373F20 REGS: cf373e70 TRAP: 0300 Not=20=tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000088, DSISR: 40000000
TASK =3D c81e04f0[12983] 'altivec' THREAD: cf372000Last syscall: 174
GPR00: C0007F2C CF373F20 C81E04F0 00000004 00000004 00030001 00000000=20=0FEE08D0
GPR08: 0000F932 C0007F2C 00009032 C0350000 081E0788 00000000 00000000=20=100A37D8
GPR16: 100A0000 00000000 100A0000 00000000 10070000 100A37C8 100AEF08=20=00000000
GPR24: 100A1108 00000000 100A59A8 3002AEF8 3002BB80 3002AE60 0FFEA6FC=20=00000004
Call trace: [c0007f2c]processor =A0 =A0 =A0 : 0
cpu =A0 =A0 =A0 =A0 =A0 =A0 : 7450
clock =A0 =A0 =A0 =A0 =A0 : 700MHz
revision =A0 =A0 =A0 =A0: 2.1 (pvr 8000 0201)
bogomips =A0 =A0 =A0 =A0: 696.32
machine =A0 =A0 =A0 =A0 : PowerMac4,4
motherboard =A0 =A0 : PowerMac4,4 MacRISC2 MacRISC Power Macintosh detected as =A0 =A0 : 80 (eMac)
pmac flags =A0 =A0 =A0: 00000001
L2 cache =A0 =A0 =A0 =A0: 256K unified
memory =A0 =A0 =A0 =A0 =A0: 384MB
pmac-generation : NewWorld
Quoted 4 lines
--=20
The only thing necessary for the triumph of evil
=A0 is for good men to do nothing. =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=
=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 - Edmund Burke
Quoted 1 line
<altivec.c>=