Skip to contentSkip to conversation

[2.6.8] OOPS and SIGSEGV on altivec instruction on PowerPC 7540.

DISCUSSION Pawel Sikora 2 participants 2 messages May 13, 2005

lore
Share & tools
lore
#0 lore raw

Hi,

simple runtime altivec detection from userspace causes an oops on the vand instruction. kernel was built *without* CONFIG_ALTIVEC. i think kernel should return a SIGILL instead of an oops ;-)

Oops: kernel access of bad area, sig: 11 [#65]
NIP: C0008B84 LR: C0007F2C SP: CF373F20 REGS: cf373e70 TRAP: 0300 Not tainted

MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000088, DSISR: 40000000
TASK = c81e04f0[12983] 'altivec' THREAD: cf372000Last syscall: 174
GPR00: C0007F2C CF373F20 C81E04F0 00000004 00000004 00030001 00000000 0FEE08D0
GPR08: 0000F932 C0007F2C 00009032 C0350000 081E0788 00000000 00000000 100A37D8
GPR16: 100A0000 00000000 100A0000 00000000 10070000 100A37C8 100AEF08 00000000
GPR24: 100A1108 00000000 100A59A8 3002AEF8 3002BB80 3002AE60 0FFEA6FC 00000004

Call trace: [c0007f2c]

processor       : 0
cpu             : 7450
clock           : 700MHz
revision        : 2.1 (pvr 8000 0201)
bogomips        : 696.32
machine         : PowerMac4,4
motherboard     : PowerMac4,4 MacRISC2 MacRISC Power Macintosh detected as     : 80 (eMac)
pmac flags      : 00000001
L2 cache        : 256K unified
memory          : 384MB
pmac-generation : NewWorld

Signature · 3 lines
The only thing necessary for the triumph of evil
  is for good men to do nothing.
                                           - Edmund Burke

#include <setjmp.h>
#include <signal.h>

static sigjmp_buf jmpbuf;
static volatile sig_atomic_t canjump = 0;

void sigill_handler(int sig)

{
        if (!canjump)
        {
                signal(sig, SIG_DFL);
                raise(sig);
        }
        canjump = 0;
        siglongjmp(jmpbuf, 1);
}

int arch_accel()

{
        signal(SIGILL, sigill_handler);
        if (sigsetjmp(jmpbuf, 1))
        {
                signal(SIGILL, SIG_DFL);
                return 0;
        }
        canjump = 1;
        asm volatile
        (
                "mtspr 256, %0          \n\t"
                "vand %%v0, %%v0, %%v0  \n\t"
                :
                : "r" (-1)
        );
        signal(SIGILL, SIG_DFL);
        return 1;
}

int main(int argc, char** argv)

{
        return arch_accel();
}
#1 lore raw

This is odd. the 2.6.8 kernel should have the code that causes a SIGILL=20=

if !CONFIG_ALTIVEC. Can you enable CONFIG_KALLSYMS.

- kumar

Quoted 42 lines · Pawel Sikora

Hi,

simple runtime altivec detection from userspace causes an oops
on the vand instruction. kernel was built *without* CONFIG_ALTIVEC.
i think kernel should return a SIGILL instead of an oops ;-)

Oops: kernel access of bad area, sig: 11 [#65]
 NIP: C0008B84 LR: C0007F2C SP: CF373F20 REGS: cf373e70 TRAP: 0300 Not=20=

tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000088, DSISR: 40000000
TASK =3D c81e04f0[12983] 'altivec' THREAD: cf372000Last syscall: 174
GPR00: C0007F2C CF373F20 C81E04F0 00000004 00000004 00030001 00000000=20=

0FEE08D0
GPR08: 0000F932 C0007F2C 00009032 C0350000 081E0788 00000000 00000000=20=

100A37D8
GPR16: 100A0000 00000000 100A0000 00000000 10070000 100A37C8 100AEF08=20=

00000000
GPR24: 100A1108 00000000 100A59A8 3002AEF8 3002BB80 3002AE60 0FFEA6FC=20=

00000004

 Call trace: [c0007f2c]

processor =A0 =A0 =A0 : 0
cpu =A0 =A0 =A0 =A0 =A0 =A0 : 7450
clock =A0 =A0 =A0 =A0 =A0 : 700MHz
revision =A0 =A0 =A0 =A0: 2.1 (pvr 8000 0201)
bogomips =A0 =A0 =A0 =A0: 696.32
machine =A0 =A0 =A0 =A0 : PowerMac4,4
motherboard =A0 =A0 : PowerMac4,4 MacRISC2 MacRISC Power Macintosh detected as =A0 =A0 : 80 (eMac)
pmac flags =A0 =A0 =A0: 00000001
L2 cache =A0 =A0 =A0 =A0: 256K unified
memory =A0 =A0 =A0 =A0 =A0: 384MB
pmac-generation : NewWorld

Quoted 4 lines

--=20
The only thing necessary for the triumph of evil
=A0 is for good men to do nothing. =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 - Edmund Burke

Quoted 1 line

<altivec.c>=