tc filter matching anything
Hey,
I have a problem adding a filter matching anything, here is my setup:
###############
tc qdisc add dev eth0 handle 1: root prio
tc qdisc add dev eth0 parent 1:1 handle 10: pfifo
tc qdisc add dev eth0 parent 1:2 handle 20: tbf latency 50ms rate \
128kbit burst 256kbit
tc filter add dev eth0 protocol ip parent 1:0 prio 1 handle 666 fw \
flowid 1:2
tc filter add dev eth0 protocol ip parent 1:0 prio 2 flowid 1:1
#####################
This is supposed to put all traffic marked by iptables in the tbf qdisc, but the last line gives me this error:
error: Unknown filter "flowid", hence option "1:1" is unparsable
I'm running Linux 2.4.27-2-686 with iptables v1.2.11 on debian sarge
Does anyone know what is wrong, or have a better solution for my setup?
Thank you.
Fredrik Bredeli
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
You can do a "match anything" with the usage of tc-filter:
tc filter add dev eth0 parent 1:0 protocol all u32 match u32 0 0 flowid 1:1
Cheers,
Andreas
Quoted 27 lines · Fredrik Bredeli
Hey,
I have a problem adding a filter matching anything, here is my setup:
###############
tc qdisc add dev eth0 handle 1: root priotc qdisc add dev eth0 parent 1:1 handle 10: pfifo
tc qdisc add dev eth0 parent 1:2 handle 20: tbf latency 50ms rate \
128kbit burst 256kbittc filter add dev eth0 protocol ip parent 1:0 prio 1 handle 666 fw \
flowid 1:2tc filter add dev eth0 protocol ip parent 1:0 prio 2 flowid 1:1
#####################This is supposed to put all traffic marked by iptables in the tbf qdisc, but the last line gives me this error:
error: Unknown filter "flowid", hence option "1:1" is unparsable
I'm running Linux 2.4.27-2-686 with iptables v1.2.11 on debian sarge
Does anyone know what is wrong, or have a better solution for my setup?
Quoted 9 lines
Thank you.
Fredrik Bredeli
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 4 lines
You can do a "match anything" with the usage of tc-filter:
tc filter add dev eth0 parent 1:0 protocol all u32 match u32 0 0 flowid 1:1
That is great, thank you. :-)
Fredrik Bredeli
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc