driver for Marvell 88E8053 PCI Express Gigabit LAN
Hello,
there are GPL driver for the Marvell 88E8053 GLAN:
http://dlsvr01.asus.com/pub/ASUS/lan/marvell/8053/8053_others2.zip
The problem is that they are not compiling with the current kernel. Could you please adapt and integrate the drivers to the current kernel?
Thanks & regards,
Alexander
Quoted 1 line · Alexander Fieroch
http://dlsvr01.asus.com/pub/ASUS/lan/marvell/8053/8053_others2.zip
Oh, that driver is very old. Here is the latest one which is working with the current kernel:
http://www.syskonnect.de/syskonnect/support/driver/htm/sk9elin.htm
Could you please integrate it to the kernel?
Regards,
Alexander
Hi Alexander,
Quoted 10 lines · Alexander Fieroch
Quoted 1 line · Alexander Fieroch
http://dlsvr01.asus.com/pub/ASUS/lan/marvell/8053/8053_others2.zip
Oh, that driver is very old. Here is the latest one which is working with the current kernel:
http://www.syskonnect.de/syskonnect/support/driver/htm/sk9elin.htm
Could you please integrate it to the kernel?
Syskonnect's latest changes to the sk98lin driver do not adhere to Linux coding standards -- they have basically crammed two drivers into one in an ugly fashion. It won't be included in the mainline kernel in this form.
Part of sk98lin has been rewritten as skge (this supports the Yukon-based PCI adapters) which will be included in 2.6.13.
In order to support the newer Yukon-II (PCI express) adapters in an acceptable fashion, a new driver will need to be written, skge-style. I don't think this is in development just yet. Perhaps you could try contacting Syskonnect/Marvell yourself to get them to help out developing a driver fit for inclusion.
Daniel
Quoted 20 lines · On Thu, 28 Jul 2005 13:19:20 +0100 Daniel Drake <[email protected]> wrote:
Hi Alexander,
Quoted 11 lines · Alexander Fieroch
Quoted 1 line · Alexander Fieroch
http://dlsvr01.asus.com/pub/ASUS/lan/marvell/8053/8053_others2.zip
Oh, that driver is very old. Here is the latest one which is working with the current kernel:
http://www.syskonnect.de/syskonnect/support/driver/htm/sk9elin.htm
Could you please integrate it to the kernel?
Syskonnect's latest changes to the sk98lin driver do not adhere to Linux coding standards -- they have basically crammed two drivers into one in an ugly fashion. It won't be included in the mainline kernel in this form.
Quoted 9 lines
Part of sk98lin has been rewritten as skge (this supports the Yukon- based PCI adapters) which will be included in 2.6.13.
In order to support the newer Yukon-II (PCI express) adapters in an acceptable fashion, a new driver will need to be written, skge-style. I don't think this is in development just yet. Perhaps you could try contacting Syskonnect/Marvell yourself to get them to help out developing a driver fit for inclusion.
I am working on a sky2 driver modeled on skge. It is taking baby steps now.