Skip to contentSkip to conversation

driver for Marvell 88E8053 PCI Express Gigabit LAN

DISCUSSION Alexander Fieroch 3 participants 4 messages Jul 27, 2005 – Jul 28, 2005

lore
Share & tools
lore
#2 lore raw

Hi Alexander,

Quoted 10 lines · Alexander Fieroch
Quoted 1 line · Alexander Fieroch

http://dlsvr01.asus.com/pub/ASUS/lan/marvell/8053/8053_others2.zip

Oh, that driver is very old. Here is the latest one which is working with the current kernel:

http://www.syskonnect.de/syskonnect/support/driver/htm/sk9elin.htm

Could you please integrate it to the kernel?

Syskonnect's latest changes to the sk98lin driver do not adhere to Linux coding standards -- they have basically crammed two drivers into one in an ugly fashion. It won't be included in the mainline kernel in this form.

Part of sk98lin has been rewritten as skge (this supports the Yukon-based PCI adapters) which will be included in 2.6.13.

In order to support the newer Yukon-II (PCI express) adapters in an acceptable fashion, a new driver will need to be written, skge-style. I don't think this is in development just yet. Perhaps you could try contacting Syskonnect/Marvell yourself to get them to help out developing a driver fit for inclusion.

Daniel

#3 lore raw
Quoted 20 lines · On Thu, 28 Jul 2005 13:19:20 +0100 Daniel Drake <[email protected]> wrote:

Hi Alexander,

Quoted 11 lines · Alexander Fieroch
Quoted 1 line · Alexander Fieroch

http://dlsvr01.asus.com/pub/ASUS/lan/marvell/8053/8053_others2.zip

Oh, that driver is very old. Here is the latest one which is working with the current kernel:

http://www.syskonnect.de/syskonnect/support/driver/htm/sk9elin.htm

Could you please integrate it to the kernel?

Syskonnect's latest changes to the sk98lin driver do not adhere to Linux coding standards -- they have basically crammed two drivers into one in an ugly fashion. It won't be included in the mainline kernel in this form.

Quoted 9 lines

Part of sk98lin has been rewritten as skge (this supports the Yukon- based PCI adapters) which will be included in 2.6.13.

In order to support the newer Yukon-II (PCI express) adapters in an acceptable fashion, a new driver will need to be written, skge-style. I don't think this is in development just yet. Perhaps you could try contacting Syskonnect/Marvell yourself to get them to help out developing a driver fit for inclusion.

I am working on a sky2 driver modeled on skge. It is taking baby steps now.