OOPS in 2.6.13-rc1-mm1 -- EIP is at sysfs_release+0x49/0xb0
mtrr: base(0xe8020000) is not aligned on a size(0x3c0000) boundary [drm:drm_unlock] *ERROR* Process 4470 using kernel context 0
mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x1000000
Unable to handle kernel paging request at virtual address 5f78735f printing eip: c01abbf9 *pde = 00000000 Oops: 0002 [#1] PREEMPT Modules linked in: pcmcia container ipv6 af_packet ohci1394
yenta_socket rsrc_nonstatic pcmcia_core ipw2200 ieee80211 ieee80211_crypt 8139too mii snd_intel8x0 snd_ac97_codec snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc ehci_hcd uhci_hcd usbcore rtc nls_cp437 sbp2 scsi_mod ieee1394 psmouse ide_cd cdrom
CPU: 0 EIP: 0060:[<c01abbf9>] Not tainted VLI EFLAGS: 00010246 (2.6.13-rc1-mm1)
EIP is at sysfs_release+0x49/0xb0
eax: 5f78725f ebx: 5f78725f ecx: 00000001 edx: f7662000
esi: c19520a4 edi: f70b8a80 ebp: f7663f3c esp: f7663f2c
ds: 007b es: 007b ss: 0068
Process hald (pid: 4736, threadinfo=f7662000 task=f7c97a80)
Stack: c19520a4 00000010 f70d2d80 f7703174 f7663f68 c0169a5a f7703174 f70d2d80
00000000 00000000 c1894180 f7715c8c f70d2d80 c1bcd900 00000000 f7663f78
c016985a f70d2d80 f70d2d80 f7663f94 c0167dcb f70d2d80 c1bcd900 00000010
Call Trace:
[<c010415f>] show_stack+0x7f/0xa0
[<c0104314>] show_registers+0x164/0x1d0
[<c010452d>] die+0xed/0x180
[<c0119314>] do_page_fault+0x344/0x68d
[<c0103d6f>] error_code+0x4f/0x54
[<c0169a5a>] __fput+0x1da/0x1f0
[<c016985a>] fput+0x2a/0x50
[<c0167dcb>] filp_close+0x4b/0x80
[<c0167e7a>] sys_close+0x7a/0xb0
[<c010326b>] sysenter_past_esp+0x54/0x75
Code: 85 f6 8b 40 14 8b 58 04 74 08 89 34 24 e8 60 a3 07 00 85 db 7438 b8 01 00 00 00 e8 b2 25 f7 ff e8 ed f2 07 00 c1 e0 07 8d 04 18 <ff> 88 00 01 00 00 83 3b 02 74 43 b8 01 00 00 00 e8 d2 25 f7 ff
<6>note: hald[4736] exited with preempt_count 1
scheduling while atomic: hald/0x10000001/4736
[<c010419e>] dump_stack+0x1e/0x30 [<c0362052>] schedule+0x682/0x690 [<c0362a5f>] cond_resched+0x2f/0x50 [<c015738d>] unmap_vmas+0x16d/0x200 [<c015c2c1>] exit_mmap+0x81/0x170 [<c011f982>] mmput+0x42/0x110 [<c0123f63>] exit_mm+0xe3/0x110 [<c0124980>] do_exit+0x100/0x550 [<c01045bf>] die+0x17f/0x180 [<c0119314>] do_page_fault+0x344/0x68d [<c0103d6f>] error_code+0x4f/0x54 [<c0169a5a>] __fput+0x1da/0x1f0 [<c016985a>] fput+0x2a/0x50 [<c0167dcb>] filp_close+0x4b/0x80 [<c0167e7a>] sys_close+0x7a/0xb0 [<c010326b>] sysenter_past_esp+0x54/0x75
eth1: no IPv6 routers present
CONFIG_PREEMPT=yCONFIG_PREEMPT_BKL=yCONFIG_X86_UP_APIC=yCONFIG_X86_UP_IOAPIC=yCONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=yCONFIG_X86_TSC=yCONFIG_X86_MCE=yCONFIG_X86_MCE_NONFATAL=yCONFIG_X86_MCE_P4THERMAL=yCONFIG_TOSHIBA=mCONFIG_I8K=mCONFIG_MICROCODE=mCONFIG_X86_MSR=mCONFIG_X86_CPUID=m
#
# Firmware Drivers
#CONFIG_HIGHMEM4G=yCONFIG_HIGHMEM=yCONFIG_SELECT_MEMORY_MODEL=yCONFIG_FLATMEM_MANUAL=yCONFIG_FLATMEM=yCONFIG_FLAT_NODE_MEM_MAP=yCONFIG_HIGHPTE=yCONFIG_MATH_EMULATION=yCONFIG_MTRR=yCONFIG_EFI=yCONFIG_HAVE_DEC_LOCK=yCONFIG_BOOT_IOREMAP=y
CONFIG_ACPI=yCONFIG_ACPI_BOOT=yCONFIG_ACPI_INTERPRETER=yCONFIG_ACPI_SLEEP=yCONFIG_ACPI_SLEEP_PROC_FS=yCONFIG_ACPI_AC=yCONFIG_ACPI_BATTERY=yCONFIG_ACPI_BUTTON=yCONFIG_ACPI_VIDEO=yCONFIG_ACPI_HOTKEY=yCONFIG_ACPI_FAN=yCONFIG_ACPI_PROCESSOR=yCONFIG_ACPI_THERMAL=yCONFIG_ACPI_BLACKLIST_YEAR=0CONFIG_ACPI_BUS=yCONFIG_ACPI_EC=yCONFIG_ACPI_POWER=yCONFIG_ACPI_PCI=yCONFIG_ACPI_SYSTEM=yCONFIG_X86_PM_TIMER=yCONFIG_ACPI_CONTAINER=m
CONFIG_AGP=yCONFIG_AGP_INTEL=yCONFIG_DRM=yCONFIG_DRM_I830=y
CONFIG_I2C=yCONFIG_I2C_CHARDEV=y
#
# I2C Algorithms
#CONFIG_I2C_ALGOBIT=yCONFIG_I2C_ALGOPCF=yCONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#CONFIG_I2C_I801=yCONFIG_I2C_I810=yCONFIG_I2C_ISA=m
CONFIG_FB=yCONFIG_FB_CFB_FILLRECT=yCONFIG_FB_CFB_COPYAREA=yCONFIG_FB_CFB_IMAGEBLIT=yCONFIG_FB_SOFT_CURSOR=yCONFIG_FB_MODE_HELPERS=yCONFIG_FB_TILEBLITTING=yCONFIG_FB_VESA=yCONFIG_VIDEO_SELECT=y
0000:00:00.0 Host bridge: Intel Corp. 82852/855GM Host Bridge (rev 02) 0000:00:00.1 System peripheral: Intel Corp. 855GM/GME GMCH Memory I/O Control Registers (rev 02)
0000:00:00.3 System peripheral: Intel Corp. 855GM/GME GMCH Configuration Process Registers (rev 02)
0000:00:02.0 VGA compatible controller: Intel Corp. 82852/855GM Integrated Graphics Device (rev 02)
0000:00:02.1 Display controller: Intel Corp. 82852/855GM Integrated Graphics Device (rev 02)
0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 83) 0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 03) 0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA Storage Controller (rev 03)
0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
0000:00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)
0000:02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
0000:02:06.0 Network controller: Intel Corp. PRO/Wireless 2200BG (rev 05) 0000:02:09.0 CardBus bridge: Texas Instruments: Unknown device 8031 0000:02:09.2 FireWire (IEEE 1394): Texas Instruments: Unknown device 8032 0000:02:09.3 Unknown mass storage controller: Texas Instruments:
Unknown device 8033
0000:02:09.4 0805: Texas Instruments: Unknown device 8034
Quoted 24 lines · Miles Lane
mtrr: base(0xe8020000) is not aligned on a size(0x3c0000) boundary [drm:drm_unlock] *ERROR* Process 4470 using kernel context 0
mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x1000000Unable to handle kernel paging request at virtual address 5f78735f printing eip: c01abbf9 *pde = 00000000 Oops: 0002 [#1] PREEMPT Modules linked in: pcmcia container ipv6 af_packet ohci1394
yenta_socketrsrc_nonstaticpcmcia_coreipw2200 ieee80211ieee80211_crypt8139too miisnd_intel8x0snd_ac97_codecsnd_pcm_osssnd_mixer_osssnd_pcmsnd_timersnd soundcoresnd_page_allocehci_hcduhci_hcdusbcore rtcnls_cp437sbp2scsi_modieee1394 psmouseide_cdcdromCPU: 0 EIP: 0060:[<c01abbf9>] Not tainted VLI EFLAGS: 00010246 (2.6.13-rc1-mm1)EIP is at
sysfs_release+0x49/0xb0
eax:5f78725febx:5f78725fecx: 00000001 edx:f7662000
esi:c19520a4edi:f70b8a80ebp:f7663f3cesp:f7663f2c
ds: 007b es: 007b ss: 0068
Process hald (pid: 4736, threadinfo=f7662000 task=f7c97a80)
Quoted 14 lines
Stack: c19520a4 00000010 f70d2d80 f7703174 f7663f68 c0169a5a f7703174 f70d2d80
00000000 00000000 c1894180 f7715c8c f70d2d80 c1bcd900 00000000 f7663f78
c016985a f70d2d80 f70d2d80 f7663f94 c0167dcb f70d2d80 c1bcd900 00000010
Call Trace:
[<c010415f>] show_stack+0x7f/0xa0
[<c0104314>] show_registers+0x164/0x1d0
[<c010452d>] die+0xed/0x180
[<c0119314>] do_page_fault+0x344/0x68d
[<c0103d6f>] error_code+0x4f/0x54
[<c0169a5a>] __fput+0x1da/0x1f0
[<c016985a>] fput+0x2a/0x50
[<c0167dcb>] filp_close+0x4b/0x80
[<c0167e7a>] sys_close+0x7a/0xb0
[<c010326b>] sysenter_past_esp+0x54/0x75It's irritating that when some driver screws up its sysfs handling, the trace leaves no indication which driver it was.
One thing you could do is to disable hald' (what is that anyway?) by renaming it and try to get the system to boot. Then run hald' by hand, under strace, work out which sysfs file it was trying to close.
Quoted 3 lines · Andrew Morton
One thing you could do is to disable
hald' (what is that anyway?) by renaming it and try to get the system to boot. Then runhald' by hand, under strace, work out which sysfs file it was trying to close.
Probably the Hardware Abstraction Layer [1] daemon.
1. http://freedesktop.org/wiki/Software_2fhal
Signature · 1 line
schnee
Quoted 4 lines · Miles Lane
mtrr: base(0xe8020000) is not aligned on a size(0x3c0000) boundary [drm:drm_unlock] *ERROR* Process 4470 using kernel context 0
mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x1000000Unable to handle kernel paging request at virtual address 5f78735f
That is a bit suspicious.. what distro/X are you using? if you are running a newer X (I think anything after XFree86 4.3) you should be using the i915 DRM not the i830..
Dave.
Hmm, in my Xorg log I find this:
(II) I810(0): [drm] created "i915" driver at busid "pci:0000:00:02.0" (WW) I810(0): i830 Kernel module detected, Use the i915 Kernel module instead, aborting DRI init.
(II) I810(0): [drm] DRM interface version 1.2
(II) I810(0): [drm] created "i915" driver at busid "pci:0000:00:02.0" (II) I810(0): [drm] added 8192 byte SAREA at 0xf916e000
(II) I810(0): [drm] mapped SAREA 0xf916e000 to 0xb7d38000
(II) I810(0): [drm] framebuffer handle = 0xe8020000
(II) I810(0): [drm] added 1 reserved context for kernel
(II) I810(0): [drm] removed 1 reserved context for kernel
(II) I810(0): [drm] unmapping 8192 bytes of SAREA 0xf916e000 at 0xb7d38000
Quoted 12 lines · Dave Airlie
Quoted 4 lines · Miles Lane
mtrr: base(0xe8020000) is not aligned on a size(0x3c0000) boundary [drm:drm_unlock] *ERROR* Process 4470 using kernel context 0
mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x1000000Unable to handle kernel paging request at virtual address 5f78735fThat is a bit suspicious.. what distro/X are you using? if you are running a newer X (I think anything after XFree86 4.3) you should be using the i915 DRM not the i830..
Dave.
Quoted 9 lines · Dave Airlie
Quoted 4 lines · Miles Lane
mtrr: base(0xe8020000) is not aligned on a size(0x3c0000) boundary [drm:drm_unlock] *ERROR* Process 4470 using kernel context 0
mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x1000000Unable to handle kernel paging request at virtual address 5f78735fThat is a bit suspicious.. what distro/X are you using? if you are running a newer X (I think anything after XFree86 4.3) you should be using the i915 DRM not the i830..
Thanks Dave,
I switched to the i915 kernel driver and still got the OOPS. I also continue to get the overlapping mtrr message. I am currently testing 2.6.13-rc2-git3. I have tried to run strace with hald, but cannot reproduce the problem this way. I am not sure I am invoking the command corrently. I have written to the hal developers, but have not received a response yet. Here's the current output:
mtrr: base(0xe8020000) is not aligned on a size(0x3c0000) boundary
mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x1000000
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
Unable to handle kernel paging request at virtual address 5f78735f printing eip: c01e491a *pde = 00000000 Oops: 0002 [#1] PREEMPT Modules linked in: pcmcia ipv6 af_packet ohci1394 yenta_socket
rsrc_nonstatic pcmcia_core ipw2200 firmware_class ieee80211 ieee80211_crypt 8139too mii snd_intel8x0 snd_ac97_codec snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc i2c_i801 uhci_hcd rtc nls_cp437 sbp2 ieee1394 psmouse ide_cd cdrom
CPU: 0 EIP: 0060:[<c01e491a>] Not tainted VLI EFLAGS: 00010206 (2.6.13-rc2-git3)
EIP is at sysfs_release+0x4e/0xa6
eax: 5f78735f ebx: c1b0e268 ecx: 00000001 edx: c9138000
esi: 5f78725f edi: c93dfde0 ebp: c9139f3c esp: c9139f2c
ds: 007b es: 007b ss: 0068
Process hald (pid: 4615, threadinfo=c9138000 task=c9092a80)
Stack: c1b0e268 c90c6658 00000000 c18a4a70 c9139f60 c018c8cd c8c0f3d0
c90c6658
c93f87b0 c8c0f3d0 c90c6658 00000000 f731dab0 c9139f68 c018c86b
c9139f84
c018aca9 c90c6658 f731dab0 c90c6658 f731dab0 00000010 c9139fb4
c018addb
Call Trace:
[<c0104bde>] show_stack+0x9c/0xd2
[<c0104dce>] show_registers+0x19a/0x234
[<c0105049>] die+0x152/0x2e2
[<c011d740>] do_page_fault+0x250/0x6fa
[<c01046b7>] error_code+0x4f/0x54
[<c018c8cd>] __fput+0x5c/0x174
[<c018c86b>] fput+0x18/0x1e
[<c018aca9>] filp_close+0x4a/0x70
[<c018addb>] sys_close+0x10c/0x266
[<c0103bb3>] sysenter_past_esp+0x54/0x75
Code: 78 85 db 74 08 89 1c 24 e8 68 c8 08 00 85 f6 74 39 b8 01 00 00 00e8 c8 e5 f3 ff e8 51 1a 09 00 c1 e0 07 05 00 01 00 00 8d 04 06 <ff> 08 83 3e 02 74 3c b8 01 00 00 00 e8 d9 e5 f3 ff b8 00 e0 ff
<6>note: hald[4615] exited with preempt_count 1
Debug: sleeping function called from invalid context at include/linux/rwsem.h:43in_atomic():1, irqs_disabled():0
[<c0104c32>] dump_stack+0x1e/0x20 [<c0124b69>] __might_sleep+0x9e/0xad [<c012bf0f>] exit_mm+0x3a/0x2b0 [<c012cd0a>] do_exit+0xe0/0x83b [<c01051cf>] die+0x2d8/0x2e2 [<c011d740>] do_page_fault+0x250/0x6fa [<c01046b7>] error_code+0x4f/0x54 [<c018c8cd>] __fput+0x5c/0x174 [<c018c86b>] fput+0x18/0x1e [<c018aca9>] filp_close+0x4a/0x70 [<c018addb>] sys_close+0x10c/0x266 [<c0103bb3>] sysenter_past_esp+0x54/0x75
Quoted 9 lines
Thanks Dave,
I switched to the i915 kernel driver and still got the OOPS. I also continue to get the overlapping mtrr message. I am currently testing 2.6.13-rc2-git3. I have tried to run strace with hald, but cannot reproduce the problem this way. I am not sure I am invoking the command corrently. I have written to the hal developers, but have not received a response yet. Here's the current output:
Can you try and see if you apply the patch from
http://lkml.org/lkml/2005/7/8/257
It should apply to your kernel.. I cannot get this to happen on my system... the mtrr overlaps are just vesafb setting up the mtrrs, you might try without vesafb...
Dave.
Quoted 61 lines
mtrr: base(0xe8020000) is not aligned on a size(0x3c0000) boundary
mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x1000000
apm: BIOS version 1.2 Flags0x03(Driver version 1.16ac)
apm: overridden by ACPI.Unable to handle kernel paging request at virtual address 5f78735f printing eip: c01e491a *pde = 00000000 Oops: 0002 [#1] PREEMPT Modules linked in: pcmcia ipv6 af_packet ohci1394 yenta_socket
rsrc_nonstaticpcmcia_coreipw2200firmware_classieee80211ieee80211_crypt8139too miisnd_intel8x0snd_ac97_codecsnd_pcm_osssnd_mixer_osssnd_pcmsnd_timersnd soundcoresnd_page_alloci2c_i801uhci_hcdrtcnls_cp437sbp2 ieee1394 psmouseide_cdcdromCPU: 0 EIP: 0060:[<c01e491a>] Not tainted VLI EFLAGS: 00010206 (2.6.13-rc2-git3)EIP is at
sysfs_release+0x4e/0xa6
eax:5f78735febx:c1b0e268ecx: 00000001 edx:c9138000
esi:5f78725fedi:c93dfde0ebp:c9139f3cesp:c9139f2c
ds: 007b es: 007b ss: 0068
Process hald (pid: 4615, threadinfo=c9138000 task=c9092a80)Stack: c1b0e268 c90c6658 00000000 c18a4a70 c9139f60 c018c8cd c8c0f3d0 c90c6658 c93f87b0 c8c0f3d0 c90c6658 00000000 f731dab0 c9139f68 c018c86b c9139f84 c018aca9 c90c6658 f731dab0 c90c6658 f731dab0 00000010 c9139fb4 c018addb Call Trace: [<c0104bde>] show_stack+0x9c/0xd2 [<c0104dce>] show_registers+0x19a/0x234 [<c0105049>] die+0x152/0x2e2 [<c011d740>] do_page_fault+0x250/0x6fa [<c01046b7>] error_code+0x4f/0x54 [<c018c8cd>] __fput+0x5c/0x174 [<c018c86b>] fput+0x18/0x1e [<c018aca9>] filp_close+0x4a/0x70 [<c018addb>] sys_close+0x10c/0x266 [<c0103bb3>] sysenter_past_esp+0x54/0x75 Code: 78 85 db 74 08 89 1c 24 e8 68 c8 08 00 85 f6 74 39 b8 01 00 00 00e8 c8 e5 f3 ff e8 51 1a 09 00 c1 e0 07 05 00 01 00 00 8d 04 06 <ff> 08 83 3e 02 74 3c b8 01 00 00 00 e8 d9 e5 f3 ff b8 00 e0 ff
<6>note: hald[4615] exited withpreempt_count1
Debug: sleeping function called from invalid context at include/linux/rwsem.h:43in_atomic():1, irqs_disabled():0[<c0104c32>] dump_stack+0x1e/0x20 [<c0124b69>] __might_sleep+0x9e/0xad [<c012bf0f>] exit_mm+0x3a/0x2b0 [<c012cd0a>] do_exit+0xe0/0x83b [<c01051cf>] die+0x2d8/0x2e2 [<c011d740>] do_page_fault+0x250/0x6fa [<c01046b7>] error_code+0x4f/0x54 [<c018c8cd>] __fput+0x5c/0x174 [<c018c86b>] fput+0x18/0x1e [<c018aca9>] filp_close+0x4a/0x70 [<c018addb>] sys_close+0x10c/0x266 [<c0103bb3>] sysenter_past_esp+0x54/0x75
Quoted 10 lines · Dave Airlie
Quoted 9 lines
Thanks Dave,
I switched to the i915 kernel driver and still got the OOPS. I also continue to get the overlapping mtrr message. I am currently testing 2.6.13-rc2-git3. I have tried to run strace with hald, but cannot reproduce the problem this way. I am not sure I am invoking the command corrently. I have written to the hal developers, but have not received a response yet. Here's the current output:
Quoted 7 lines
Can you try and see if you apply the patch from
http://lkml.org/lkml/2005/7/8/257
It should apply to your kernel.. I cannot get this to happen on my system... the mtrr overlaps are just vesafb setting up the mtrrs, you might try without vesafb...
I will try booting without vesafb enabled.
I get an error building with the patch applied to 2.6.13-rc2-git3:
arch/i386/kernel/built-in.o(.text+0x4010): In function `die':arch/i386/kernel/traps.c:343: undefined reference to `last_sysfs_name'
make: *** [.tmp_vmlinux1] Error 1
Thanks,
Miles
Quoted 19 lines · On Wed, 13 Jul 2005 09:54:10 -0500 Miles Lane wrote:
Quoted 10 lines · Dave Airlie
Quoted 9 lines
Thanks Dave,
I switched to the i915 kernel driver and still got the OOPS. I also continue to get the overlapping mtrr message. I am currently testing 2.6.13-rc2-git3. I have tried to run strace with hald, but cannot reproduce the problem this way. I am not sure I am invoking the command corrently. I have written to the hal developers, but have not received a response yet. Here's the current output:
Quoted 7 lines
Can you try and see if you apply the patch from
http://lkml.org/lkml/2005/7/8/257
It should apply to your kernel.. I cannot get this to happen on my system... the mtrr overlaps are just vesafb setting up the mtrrs, you might try without vesafb...
Quoted 7 lines
I will try booting without vesafb enabled.
I get an error building with the patch applied to 2.6.13-rc2-git3:
arch/i386/kernel/built-in.o(.text+0x4010): In function `die':
arch/i386/kernel/traps.c:343: undefined reference to `last_sysfs_name'
make: *** [.tmp_vmlinux1] Error 1
Miles,
Here is an updated version of the patch that builds for me. (uses last_sysfs_file instead of last_sysfs_name)
---
~Randy
Track and print last_sysfs_file on oops.
---
arch/i386/kernel/traps.c | 6 ++++++ fs/sysfs/file.c | 7 +++++++ 2 files changed, 13 insertions(+)
arch/i386/kernel/traps.c renamed from arch/i386/kernel/traps.c~last_sysfs_file +6 -0
@@ -370,6 +370,12 @@ void die(const char * str, struct pt_reg#endif if (nl)printk ("\n" ); + { +extern char last_sysfs_file[]; + +printk (KERN_ALERT "last sysfs file: %s\n" , + last_sysfs_file); + }#ifdef CONFIG_KGDB /* This is about the only place we want to go to kgdb even if in * user mode. But we must go in via a trap so within kgdb we will
fs/sysfs/file.c renamed from fs/sysfs/file.c~last_sysfs_file +7 -0
@@ -6,6 +6,8 @@#include <linux/fsnotify.h> #include <linux/kobject.h> #include <linux/namei.h> +#include <linux/limits.h> +#include <asm/uaccess.h> #include <asm/semaphore.h>
@@ -324,8 +326,13 @@ static int check_perm(struct inode * inoreturn error; } +char last_sysfs_file[PATH_MAX ]; +static int sysfs_open_file (struct inode * inode,struct file * filp) { +d_path (filp->f_dentry, sysfs_mount, last_sysfs_file, +sizeof (last_sysfs_file)); +return check_perm (inode,filp); }
Quoted 25 lines · randy_dunlap
Quoted 23 lines · On Wed, 13 Jul 2005 09:54:10 -0500 Miles Lane wrote:
Quoted 10 lines · Dave Airlie
Quoted 9 lines
Thanks Dave,
I switched to the i915 kernel driver and still got the OOPS. I also continue to get the overlapping mtrr message. I am currently testing 2.6.13-rc2-git3. I have tried to run strace with hald, but cannot reproduce the problem this way. I am not sure I am invoking the command corrently. I have written to the hal developers, but have not received a response yet. Here's the current output:
Quoted 7 lines
Can you try and see if you apply the patch from
http://lkml.org/lkml/2005/7/8/257
It should apply to your kernel.. I cannot get this to happen on my system... the mtrr overlaps are just vesafb setting up the mtrrs, you might try without vesafb...
I will try booting without vesafb enabled.
I get an error building with the patch applied to 2.6.13-rc2-git3:
Quoted 7 lines
Quoted 3 lines
arch/i386/kernel/built-in.o(.text+0x4010): In function `die':
arch/i386/kernel/traps.c:343: undefined reference to `last_sysfs_name'
make: *** [.tmp_vmlinux1] Error 1Miles,
Here is an updated version of the patch that builds for me. (useslast_sysfs_fileinstead oflast_sysfs_name)
I think I was able to reproduce this same bug on 2.6.13-rc4-mm1, here's the output (w/ apologies for long lines):
Unable to handle kernel paging request at virtual address 762f7473 printing eip: c01a8bcc *pde = 00000000 Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOC last sysfs file: /class/vc/vcs5/dev Modules linked in: cpufreq_userspace cpufreq_stats freq_table cpufreq_powersave
cpufreq_ondemand cpufreq_conservative ipv6 video thermal processor hotkey fan co ntainer button battery ac nfs lockd sunrpc af_packet tg3 ohci_hcd usbcore generi c serverworks i2c_piix4 i2c_core sworks_agp agpgart pcspkr rtc floppy tsdev dm_m od parport_pc lp parport ide_generic ide_disk ide_cd cdrom ide_core unix
CPU: 0 EIP: 0060:[<c01a8bcc>] Not tainted VLI EFLAGS: 00010246 (2.6.13-rc4-mm1)
EIP is at sysfs_release+0x4c/0xb0
eax: 762f7373 ebx: 762f7373 ecx: 00000001 edx: ef3c5000
esi: f596a188 edi: f21fecc0 ebp: ef3c5f3c esp: ef3c5f2c
ds: 007b es: 007b ss: 0068
Process udev (pid: 11843, threadinfo=ef3c5000 task=ef78e550)
Stack: f596a188 00000010 f762d580 c21bc944 ef3c5f68 c0166cea c21bc944 f762d580
00000000 00000000 c2137980 ec7e9748 f762d580 dcae7300 00000000 ef3c5f78
c0166aeb f762d580 f762d580 ef3c5f94 c01650ab f762d580 dcae7300 dcae7300
Call Trace:
[<c010401f>] show_stack+0x7f/0xa0
[<c01041d4>] show_registers+0x164/0x1d0
[<c0104422>] die+0x122/0x1c0
[<c030db1e>] do_page_fault+0x2ce/0x600
[<c0103ccb>] error_code+0x4f/0x54
[<c0166cea>] __fput+0x1da/0x1f0
[<c0166aeb>] fput+0x2b/0x50
[<c01650ab>] filp_close+0x4b/0x80
[<c016514e>] sys_close+0x6e/0x90
[<c010312f>] sysenter_past_esp+0x54/0x75
Code: 85 f6 8b 40 14 8b 58 04 74 08 89 34 24 e8 0d 97 04 00 85 db 74 38 b8 01 00
00 00 e8 af 18 f7 ff e8 4a e5 04 00 c1 e0 07 8d 04 18 <ff> 88 00 01 00 00 83 3b
02 74 49 b8 01 00 00 00 e8 cf 18 f7 ff
<6>note: udev[11843] exited with preempt_count 1Using generic hotkey driveribm_acpi: acpi_evalf(DHKC, d, ...) failed: 4097ibm_acpi: enable,0xffff' invalid for parameter hotkey'toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
apm: BIOS not found.
Let me see if I can reproduce this on either 2.6.13-rc4 or 2.6.13-rc6
Machine is an IBM x335 (dual P4), and I'm not using any framebuffer stuff.
Sonny
Quoted 38 lines · Sonny Rao
Quoted 25 lines · randy_dunlap
Quoted 23 lines · On Wed, 13 Jul 2005 09:54:10 -0500 Miles Lane wrote:
Quoted 10 lines · Dave Airlie
Quoted 9 lines
Thanks Dave,
I switched to the i915 kernel driver and still got the OOPS. I also continue to get the overlapping mtrr message. I am currently testing 2.6.13-rc2-git3. I have tried to run strace with hald, but cannot reproduce the problem this way. I am not sure I am invoking the command corrently. I have written to the hal developers, but have not received a response yet. Here's the current output:
Quoted 7 lines
Can you try and see if you apply the patch from
http://lkml.org/lkml/2005/7/8/257
It should apply to your kernel.. I cannot get this to happen on my system... the mtrr overlaps are just vesafb setting up the mtrrs, you might try without vesafb...
I will try booting without vesafb enabled.
I get an error building with the patch applied to 2.6.13-rc2-git3:
Quoted 7 lines
Quoted 3 lines
arch/i386/kernel/built-in.o(.text+0x4010): In function `die':
arch/i386/kernel/traps.c:343: undefined reference to `last_sysfs_name'
make: *** [.tmp_vmlinux1] Error 1Miles,
Here is an updated version of the patch that builds for me. (useslast_sysfs_fileinstead oflast_sysfs_name)I think I was able to reproduce this same bug on 2.6.13-rc4-mm1, here's the output (w/ apologies for long lines):
Quoted 7 lines
Unable to handle kernel paging request at virtual address 762f7473 printing eip: c01a8bcc *pde = 00000000 Oops: 0002 [#1]PREEMPT SMP
DEBUG_PAGEALLOC
last sysfs file: /class/vc/vcs5/dev
gotcha.
Quoted 37 lines
Modules linked in: cpufreq_userspace cpufreq_stats freq_table cpufreq_powersave
cpufreq_ondemandcpufreq_conservativeipv6 video thermal processor hotkey fan co ntainer button battery ac nfs lockd sunrpcaf_packettg3ohci_hcdusbcore generi c serverworksi2c_piix4i2c_coresworks_agpagpgart pcspkr rtc floppy tsdevdm_modparport_pclp parportide_genericide_diskide_cdcdromide_coreunixCPU: 0 EIP: 0060:[<c01a8bcc>] Not tainted VLI EFLAGS: 00010246 (2.6.13-rc4-mm1)EIP is at
sysfs_release+0x4c/0xb0
eax:762f7373ebx:762f7373ecx: 00000001 edx:ef3c5000
esi:f596a188edi:f21fecc0ebp:ef3c5f3cesp:ef3c5f2c
ds: 007b es: 007b ss: 0068
Process udev (pid: 11843, threadinfo=ef3c5000 task=ef78e550)Stack: f596a188 00000010 f762d580 c21bc944 ef3c5f68 c0166cea c21bc944 f762d580 00000000 00000000 c2137980 ec7e9748 f762d580 dcae7300 00000000 ef3c5f78 c0166aeb f762d580 f762d580 ef3c5f94 c01650ab f762d580 dcae7300 dcae7300 Call Trace: [<c010401f>] show_stack+0x7f/0xa0 [<c01041d4>] show_registers+0x164/0x1d0 [<c0104422>] die+0x122/0x1c0 [<c030db1e>] do_page_fault+0x2ce/0x600 [<c0103ccb>] error_code+0x4f/0x54 [<c0166cea>] __fput+0x1da/0x1f0 [<c0166aeb>] fput+0x2b/0x50 [<c01650ab>] filp_close+0x4b/0x80 [<c016514e>] sys_close+0x6e/0x90 [<c010312f>] sysenter_past_esp+0x54/0x75 Code: 85 f6 8b 40 14 8b 58 04 74 08 89 34 24 e8 0d 97 04 00 85 db 74 38 b8 01 00 00 00 e8 af 18 f7 ff e8 4a e5 04 00 c1 e0 07 8d 04 18 <ff> 88 00 01 00 00 83 3b 02 74 49 b8 01 00 00 00 e8 cf 18 f7 ff <6>note: udev[11843] exited with preempt_count 1Using generic hotkey driver
ibm_acpi:acpi_evalf(DHKC, d, ...)failed: 4097ibm_acpi:enable,0xffff' invalid for parameterhotkey'toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
apm: BIOS not found.
Quoted 5 lines
Let me see if I can reproduce this on either 2.6.13-rc4 or 2.6.13-rc6
Machine is an IBM x335 (dual P4), and I'm not using any framebuffer stuff.
Keith, does this look like the use-after-free which you've been hitting?
Quoted 86 lines · Andrew Morton
Quoted 38 lines · Sonny Rao
Quoted 25 lines · randy_dunlap
Quoted 23 lines · On Wed, 13 Jul 2005 09:54:10 -0500 Miles Lane wrote:
Quoted 10 lines · Dave Airlie
Quoted 9 lines
Thanks Dave,
I switched to the i915 kernel driver and still got the OOPS. I also continue to get the overlapping mtrr message. I am currently testing 2.6.13-rc2-git3. I have tried to run strace with hald, but cannot reproduce the problem this way. I am not sure I am invoking the command corrently. I have written to the hal developers, but have not received a response yet. Here's the current output:
Quoted 7 lines
Can you try and see if you apply the patch from
http://lkml.org/lkml/2005/7/8/257
It should apply to your kernel.. I cannot get this to happen on my system... the mtrr overlaps are just vesafb setting up the mtrrs, you might try without vesafb...
I will try booting without vesafb enabled.
I get an error building with the patch applied to 2.6.13-rc2-git3:
Quoted 7 lines
Quoted 3 lines
arch/i386/kernel/built-in.o(.text+0x4010): In function `die':
arch/i386/kernel/traps.c:343: undefined reference to `last_sysfs_name'
make: *** [.tmp_vmlinux1] Error 1Miles,
Here is an updated version of the patch that builds for me. (useslast_sysfs_fileinstead oflast_sysfs_name)I think I was able to reproduce this same bug on 2.6.13-rc4-mm1, here's the output (w/ apologies for long lines):
Quoted 7 lines
Unable to handle kernel paging request at virtual address 762f7473 printing eip: c01a8bcc *pde = 00000000 Oops: 0002 [#1]PREEMPT SMP
DEBUG_PAGEALLOC
last sysfs file: /class/vc/vcs5/devgotcha.
Quoted 37 lines
Modules linked in: cpufreq_userspace cpufreq_stats freq_table cpufreq_powersave
cpufreq_ondemandcpufreq_conservativeipv6 video thermal processor hotkey fan co ntainer button battery ac nfs lockd sunrpcaf_packettg3ohci_hcdusbcore generi c serverworksi2c_piix4i2c_coresworks_agpagpgart pcspkr rtc floppy tsdevdm_modparport_pclp parportide_genericide_diskide_cdcdromide_coreunixCPU: 0 EIP: 0060:[<c01a8bcc>] Not tainted VLI EFLAGS: 00010246 (2.6.13-rc4-mm1)EIP is at
sysfs_release+0x4c/0xb0
eax:762f7373ebx:762f7373ecx: 00000001 edx:ef3c5000
esi:f596a188edi:f21fecc0ebp:ef3c5f3cesp:ef3c5f2c
ds: 007b es: 007b ss: 0068
Process udev (pid: 11843, threadinfo=ef3c5000 task=ef78e550)Stack: f596a188 00000010 f762d580 c21bc944 ef3c5f68 c0166cea c21bc944 f762d580 00000000 00000000 c2137980 ec7e9748 f762d580 dcae7300 00000000 ef3c5f78 c0166aeb f762d580 f762d580 ef3c5f94 c01650ab f762d580 dcae7300 dcae7300 Call Trace: [<c010401f>] show_stack+0x7f/0xa0 [<c01041d4>] show_registers+0x164/0x1d0 [<c0104422>] die+0x122/0x1c0 [<c030db1e>] do_page_fault+0x2ce/0x600 [<c0103ccb>] error_code+0x4f/0x54 [<c0166cea>] __fput+0x1da/0x1f0 [<c0166aeb>] fput+0x2b/0x50 [<c01650ab>] filp_close+0x4b/0x80 [<c016514e>] sys_close+0x6e/0x90 [<c010312f>] sysenter_past_esp+0x54/0x75 Code: 85 f6 8b 40 14 8b 58 04 74 08 89 34 24 e8 0d 97 04 00 85 db 74 38 b8 01 00 00 00 e8 af 18 f7 ff e8 4a e5 04 00 c1 e0 07 8d 04 18 <ff> 88 00 01 00 00 83 3b 02 74 49 b8 01 00 00 00 e8 cf 18 f7 ff <6>note: udev[11843] exited with preempt_count 1Using generic hotkey driver
ibm_acpi:acpi_evalf(DHKC, d, ...)failed: 4097ibm_acpi:enable,0xffff' invalid for parameterhotkey'toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
apm: BIOS not found.
Quoted 7 lines
Quoted 5 lines
Let me see if I can reproduce this on either 2.6.13-rc4 or 2.6.13-rc6
Machine is an IBM x335 (dual P4), and I'm not using any framebuffer stuff.
Keith, does this look like the use-after-free which you've been hitting?
So, I've tried reproducing on 2.6.13-rc6, 2.6.13-rc5-mm1, and (the original kernel where I hit this) 2.6.13-rc4-mm1
I haven't been able to reproduce at all, unfortunately... As Keith noted before, this one is pretty elusive. I'm still up for trying patches and rebooting a million times if someone has an idea.
Sonny
Quoted 38 lines · Andrew Morton
Quoted 37 lines · Sonny Rao
Modules linked in: cpufreq_userspace cpufreq_stats freq_table cpufreq_powersave
cpufreq_ondemandcpufreq_conservativeipv6 video thermal processor hotkey fan co ntainer button battery ac nfs lockd sunrpcaf_packettg3ohci_hcdusbcore generi c serverworksi2c_piix4i2c_coresworks_agpagpgart pcspkr rtc floppy tsdevdm_modparport_pclp parportide_genericide_diskide_cdcdromide_coreunixCPU: 0 EIP: 0060:[<c01a8bcc>] Not tainted VLI EFLAGS: 00010246 (2.6.13-rc4-mm1)EIP is at
sysfs_release+0x4c/0xb0
eax:762f7373ebx:762f7373ecx: 00000001 edx:ef3c5000
esi:f596a188edi:f21fecc0ebp:ef3c5f3cesp:ef3c5f2c
ds: 007b es: 007b ss: 0068
Process udev (pid: 11843, threadinfo=ef3c5000 task=ef78e550)Stack: f596a188 00000010 f762d580 c21bc944 ef3c5f68 c0166cea c21bc944 f762d580 00000000 00000000 c2137980 ec7e9748 f762d580 dcae7300 00000000 ef3c5f78 c0166aeb f762d580 f762d580 ef3c5f94 c01650ab f762d580 dcae7300 dcae7300 Call Trace: [<c010401f>] show_stack+0x7f/0xa0 [<c01041d4>] show_registers+0x164/0x1d0 [<c0104422>] die+0x122/0x1c0 [<c030db1e>] do_page_fault+0x2ce/0x600 [<c0103ccb>] error_code+0x4f/0x54 [<c0166cea>] __fput+0x1da/0x1f0 [<c0166aeb>] fput+0x2b/0x50 [<c01650ab>] filp_close+0x4b/0x80 [<c016514e>] sys_close+0x6e/0x90 [<c010312f>] sysenter_past_esp+0x54/0x75 Code: 85 f6 8b 40 14 8b 58 04 74 08 89 34 24 e8 0d 97 04 00 85 db 74 38 b8 01 00 00 00 e8 af 18 f7 ff e8 4a e5 04 00 c1 e0 07 8d 04 18 <ff> 88 00 01 00 00 83 3b 02 74 49 b8 01 00 00 00 e8 cf 18 f7 ff <6>note: udev[11843] exited with preempt_count 1Using generic hotkey driver
ibm_acpi:acpi_evalf(DHKC, d, ...)failed: 4097ibm_acpi:enable,0xffff' invalid for parameterhotkey'toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
apm: BIOS not found.
Quoted 7 lines
Quoted 5 lines
Let me see if I can reproduce this on either 2.6.13-rc4 or 2.6.13-rc6
Machine is an IBM x335 (dual P4), and I'm not using any framebuffer stuff.
Keith, does this look like the use-after-free which you've been hitting?
It is certainly in the same place, freeing the data that is chained off sd->s_element. This oops does not show any memory poisoning, but I am guessing that the kernel was not compiled with slab debugging. On balance, it looks like the same problem.
Quoted 46 lines · Keith Owens
Quoted 44 lines · Andrew Morton
Quoted 42 lines · Sonny Rao
Modules linked in: cpufreq_userspace cpufreq_stats freq_table cpufreq_powersave
cpufreq_ondemandcpufreq_conservativeipv6 video thermal processor hotkey fan co ntainer button battery ac nfs lockd sunrpcaf_packettg3ohci_hcdusbcore generi c serverworksi2c_piix4i2c_coresworks_agpagpgart pcspkr rtc floppy tsdevdm_modparport_pclp parportide_genericide_diskide_cdcdromide_coreunixCPU: 0 EIP: 0060:[<c01a8bcc>] Not tainted VLI EFLAGS: 00010246 (2.6.13-rc4-mm1)EIP is at
sysfs_release+0x4c/0xb0
eax:762f7373ebx:762f7373ecx: 00000001 edx:ef3c5000
esi:f596a188edi:f21fecc0ebp:ef3c5f3cesp:ef3c5f2c
ds: 007b es: 007b ss: 0068
Process udev (pid: 11843, threadinfo=ef3c5000 task=ef78e550)Stack: f596a188 00000010 f762d580 c21bc944 ef3c5f68 c0166cea c21bc944 f762d580 00000000 00000000 c2137980 ec7e9748 f762d580 dcae7300 00000000 ef3c5f78 c0166aeb f762d580 f762d580 ef3c5f94 c01650ab f762d580 dcae7300 dcae7300 Call Trace: [<c010401f>] show_stack+0x7f/0xa0 [<c01041d4>] show_registers+0x164/0x1d0 [<c0104422>] die+0x122/0x1c0 [<c030db1e>] do_page_fault+0x2ce/0x600 [<c0103ccb>] error_code+0x4f/0x54 [<c0166cea>] __fput+0x1da/0x1f0 [<c0166aeb>] fput+0x2b/0x50 [<c01650ab>] filp_close+0x4b/0x80 [<c016514e>] sys_close+0x6e/0x90 [<c010312f>] sysenter_past_esp+0x54/0x75 Code: 85 f6 8b 40 14 8b 58 04 74 08 89 34 24 e8 0d 97 04 00 85 db 74 38 b8 01 00 00 00 e8 af 18 f7 ff e8 4a e5 04 00 c1 e0 07 8d 04 18 <ff> 88 00 01 00 00 83 3b 02 74 49 b8 01 00 00 00 e8 cf 18 f7 ff <6>note: udev[11843] exited with preempt_count 1Using generic hotkey driver
ibm_acpi:acpi_evalf(DHKC, d, ...)failed: 4097ibm_acpi:enable,0xffff' invalid for parameterhotkey'toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
apm: BIOS not found.Let me see if I can reproduce this on either 2.6.13-rc4 or 2.6.13-rc6
Machine is an IBM x335 (dual P4), and I'm not using any framebuffer stuff.
Quoted 6 lines
Quoted 1 line
Keith, does this look like the use-after-free which you've been hitting?
It is certainly in the same place, freeing the data that is chained off
sd->s_element. This oops does not show any memory poisoning, but I am guessing that the kernel was not compiled with slab debugging. On balance, it looks like the same problem.
You are correct; I didn't have slab debugging on.