Skip to contentSkip to conversation

OOPS in 2.6.13-rc1-mm1 -- EIP is at sysfs_release+0x49/0xb0

DISCUSSION Miles Lane 7 participants 14 messages Jul 3, 2005 – Aug 9, 2005 Driver core

lore
Share & tools
lore

Miles Lane

author
#0 lore raw

mtrr: base(0xe8020000) is not aligned on a size(0x3c0000) boundary [drm:drm_unlock] *ERROR* Process 4470 using kernel context 0
mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x1000000

Unable to handle kernel paging request at virtual address 5f78735f
 printing eip:
c01abbf9
*pde = 00000000
Oops: 0002 [#1]
PREEMPT
Modules linked in: pcmcia container ipv6 af_packet ohci1394

yenta_socket rsrc_nonstatic pcmcia_core ipw2200 ieee80211 ieee80211_crypt 8139too mii snd_intel8x0 snd_ac97_codec snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc ehci_hcd uhci_hcd usbcore rtc nls_cp437 sbp2 scsi_mod ieee1394 psmouse ide_cd cdrom

CPU:    0
EIP:    0060:[<c01abbf9>]    Not tainted VLI
EFLAGS: 00010246   (2.6.13-rc1-mm1)

EIP is at sysfs_release+0x49/0xb0
eax: 5f78725f ebx: 5f78725f ecx: 00000001 edx: f7662000
esi: c19520a4 edi: f70b8a80 ebp: f7663f3c esp: f7663f2c
ds: 007b es: 007b ss: 0068
Process hald (pid: 4736, threadinfo=f7662000 task=f7c97a80)

Stack: c19520a4 00000010 f70d2d80 f7703174 f7663f68 c0169a5a f7703174 f70d2d80
       00000000 00000000 c1894180 f7715c8c f70d2d80 c1bcd900 00000000 f7663f78
       c016985a f70d2d80 f70d2d80 f7663f94 c0167dcb f70d2d80 c1bcd900 00000010
Call Trace:
 [<c010415f>] show_stack+0x7f/0xa0
 [<c0104314>] show_registers+0x164/0x1d0
 [<c010452d>] die+0xed/0x180
 [<c0119314>] do_page_fault+0x344/0x68d
 [<c0103d6f>] error_code+0x4f/0x54
 [<c0169a5a>] __fput+0x1da/0x1f0
 [<c016985a>] fput+0x2a/0x50
 [<c0167dcb>] filp_close+0x4b/0x80
 [<c0167e7a>] sys_close+0x7a/0xb0
 [<c010326b>] sysenter_past_esp+0x54/0x75
Code: 85 f6 8b 40 14 8b 58 04 74 08 89 34 24 e8 60 a3 07 00 85 db 74

38 b8 01 00 00 00 e8 b2 25 f7 ff e8 ed f2 07 00 c1 e0 07 8d 04 18 <ff> 88 00 01 00 00 83 3b 02 74 43 b8 01 00 00 00 e8 d2 25 f7 ff
<6>note: hald[4736] exited with preempt_count 1
scheduling while atomic: hald/0x10000001/4736

 [<c010419e>] dump_stack+0x1e/0x30
 [<c0362052>] schedule+0x682/0x690
 [<c0362a5f>] cond_resched+0x2f/0x50
 [<c015738d>] unmap_vmas+0x16d/0x200
 [<c015c2c1>] exit_mmap+0x81/0x170
 [<c011f982>] mmput+0x42/0x110
 [<c0123f63>] exit_mm+0xe3/0x110
 [<c0124980>] do_exit+0x100/0x550
 [<c01045bf>] die+0x17f/0x180
 [<c0119314>] do_page_fault+0x344/0x68d
 [<c0103d6f>] error_code+0x4f/0x54
 [<c0169a5a>] __fput+0x1da/0x1f0
 [<c016985a>] fput+0x2a/0x50
 [<c0167dcb>] filp_close+0x4b/0x80
 [<c0167e7a>] sys_close+0x7a/0xb0
 [<c010326b>] sysenter_past_esp+0x54/0x75

eth1: no IPv6 routers present

CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_TOSHIBA=m
CONFIG_I8K=m
CONFIG_MICROCODE=m
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m

#
# Firmware Drivers
#
CONFIG_HIGHMEM4G=y
CONFIG_HIGHMEM=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_HIGHPTE=y
CONFIG_MATH_EMULATION=y
CONFIG_MTRR=y
CONFIG_EFI=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_BOOT_IOREMAP=y

CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_HOTKEY=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=m

CONFIG_AGP=y
CONFIG_AGP_INTEL=y
CONFIG_DRM=y
CONFIG_DRM_I830=y

CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y

#
# I2C Hardware Bus support
#
CONFIG_I2C_I801=y
CONFIG_I2C_I810=y
CONFIG_I2C_ISA=m

CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SOFT_CURSOR=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y

0000:00:00.0 Host bridge: Intel Corp. 82852/855GM Host Bridge (rev 02) 0000:00:00.1 System peripheral: Intel Corp. 855GM/GME GMCH Memory I/O Control Registers (rev 02)
0000:00:00.3 System peripheral: Intel Corp. 855GM/GME GMCH Configuration Process Registers (rev 02)
0000:00:02.0 VGA compatible controller: Intel Corp. 82852/855GM Integrated Graphics Device (rev 02)
0000:00:02.1 Display controller: Intel Corp. 82852/855GM Integrated Graphics Device (rev 02)
0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 83) 0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 03) 0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA Storage Controller (rev 03)
0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
0000:00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)
0000:02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
0000:02:06.0 Network controller: Intel Corp. PRO/Wireless 2200BG (rev 05) 0000:02:09.0 CardBus bridge: Texas Instruments: Unknown device 8031 0000:02:09.2 FireWire (IEEE 1394): Texas Instruments: Unknown device 8032 0000:02:09.3 Unknown mass storage controller: Texas Instruments:
Unknown device 8033
0000:02:09.4 0805: Texas Instruments: Unknown device 8034

#1 lore raw
Quoted 24 lines · Miles Lane

mtrr: base(0xe8020000) is not aligned on a size(0x3c0000) boundary [drm:drm_unlock] *ERROR* Process 4470 using kernel context 0
mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x1000000

Unable to handle kernel paging request at virtual address 5f78735f
 printing eip:
c01abbf9
*pde = 00000000
Oops: 0002 [#1]
PREEMPT
Modules linked in: pcmcia container ipv6 af_packet ohci1394

yenta_socket rsrc_nonstatic pcmcia_core ipw2200 ieee80211 ieee80211_crypt 8139too mii snd_intel8x0 snd_ac97_codec snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc ehci_hcd uhci_hcd usbcore rtc nls_cp437 sbp2 scsi_mod ieee1394 psmouse ide_cd cdrom

CPU:    0
EIP:    0060:[<c01abbf9>]    Not tainted VLI
EFLAGS: 00010246   (2.6.13-rc1-mm1)

EIP is at sysfs_release+0x49/0xb0
eax: 5f78725f ebx: 5f78725f ecx: 00000001 edx: f7662000
esi: c19520a4 edi: f70b8a80 ebp: f7663f3c esp: f7663f2c
ds: 007b es: 007b ss: 0068
Process hald (pid: 4736, threadinfo=f7662000 task=f7c97a80)

Quoted 14 lines
Stack: c19520a4 00000010 f70d2d80 f7703174 f7663f68 c0169a5a f7703174 f70d2d80
       00000000 00000000 c1894180 f7715c8c f70d2d80 c1bcd900 00000000 f7663f78
       c016985a f70d2d80 f70d2d80 f7663f94 c0167dcb f70d2d80 c1bcd900 00000010
Call Trace:
 [<c010415f>] show_stack+0x7f/0xa0
 [<c0104314>] show_registers+0x164/0x1d0
 [<c010452d>] die+0xed/0x180
 [<c0119314>] do_page_fault+0x344/0x68d
 [<c0103d6f>] error_code+0x4f/0x54
 [<c0169a5a>] __fput+0x1da/0x1f0
 [<c016985a>] fput+0x2a/0x50
 [<c0167dcb>] filp_close+0x4b/0x80
 [<c0167e7a>] sys_close+0x7a/0xb0
 [<c010326b>] sysenter_past_esp+0x54/0x75

It's irritating that when some driver screws up its sysfs handling, the trace leaves no indication which driver it was.

One thing you could do is to disable hald' (what is that anyway?) by renaming it and try to get the system to boot. Then run hald' by hand, under strace, work out which sysfs file it was trying to close.

#2 lore raw
Quoted 3 lines · Andrew Morton

One thing you could do is to disable hald' (what is that anyway?) by renaming it and try to get the system to boot. Then run hald' by hand, under strace, work out which sysfs file it was trying to close.

Probably the Hardware Abstraction Layer [1] daemon.

1. http://freedesktop.org/wiki/Software_2fhal

Signature · 1 line
schnee
#3 lore raw
In reply to Miles Lane
Quoted 4 lines · Miles Lane

mtrr: base(0xe8020000) is not aligned on a size(0x3c0000) boundary [drm:drm_unlock] *ERROR* Process 4470 using kernel context 0
mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x1000000

Unable to handle kernel paging request at virtual address 5f78735f

That is a bit suspicious.. what distro/X are you using? if you are running a newer X (I think anything after XFree86 4.3) you should be using the i915 DRM not the i830..

Dave.

author
#4 lore raw

Hmm, in my Xorg log I find this:

(II) I810(0): [drm] created "i915" driver at busid "pci:0000:00:02.0" (WW) I810(0): i830 Kernel module detected, Use the i915 Kernel module instead, aborting DRI init.

(II) I810(0): [drm] DRM interface version 1.2
(II) I810(0): [drm] created "i915" driver at busid "pci:0000:00:02.0" (II) I810(0): [drm] added 8192 byte SAREA at 0xf916e000
(II) I810(0): [drm] mapped SAREA 0xf916e000 to 0xb7d38000
(II) I810(0): [drm] framebuffer handle = 0xe8020000
(II) I810(0): [drm] added 1 reserved context for kernel
(II) I810(0): [drm] removed 1 reserved context for kernel
(II) I810(0): [drm] unmapping 8192 bytes of SAREA 0xf916e000 at 0xb7d38000

Quoted 12 lines · Dave Airlie
Quoted 4 lines · Miles Lane

mtrr: base(0xe8020000) is not aligned on a size(0x3c0000) boundary [drm:drm_unlock] *ERROR* Process 4470 using kernel context 0
mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x1000000

Unable to handle kernel paging request at virtual address 5f78735f

That is a bit suspicious.. what distro/X are you using? if you are running a newer X (I think anything after XFree86 4.3) you should be using the i915 DRM not the i830..

Dave.

author
#5 lore raw
In reply to Dave Airlie
Quoted 9 lines · Dave Airlie
Quoted 4 lines · Miles Lane

mtrr: base(0xe8020000) is not aligned on a size(0x3c0000) boundary [drm:drm_unlock] *ERROR* Process 4470 using kernel context 0
mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x1000000

Unable to handle kernel paging request at virtual address 5f78735f

That is a bit suspicious.. what distro/X are you using? if you are running a newer X (I think anything after XFree86 4.3) you should be using the i915 DRM not the i830..

Thanks Dave,

I switched to the i915 kernel driver and still got the OOPS. I also continue to get the overlapping mtrr message. I am currently testing 2.6.13-rc2-git3. I have tried to run strace with hald, but cannot reproduce the problem this way. I am not sure I am invoking the command corrently. I have written to the hal developers, but have not received a response yet. Here's the current output:

mtrr: base(0xe8020000) is not aligned on a size(0x3c0000) boundary
mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x1000000
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.

Unable to handle kernel paging request at virtual address 5f78735f
 printing eip:
c01e491a
*pde = 00000000
Oops: 0002 [#1]
PREEMPT
Modules linked in: pcmcia ipv6 af_packet ohci1394 yenta_socket

rsrc_nonstatic pcmcia_core ipw2200 firmware_class ieee80211 ieee80211_crypt 8139too mii snd_intel8x0 snd_ac97_codec snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc i2c_i801 uhci_hcd rtc nls_cp437 sbp2 ieee1394 psmouse ide_cd cdrom

CPU:    0
EIP:    0060:[<c01e491a>]    Not tainted VLI
EFLAGS: 00010206   (2.6.13-rc2-git3)

EIP is at sysfs_release+0x4e/0xa6
eax: 5f78735f ebx: c1b0e268 ecx: 00000001 edx: c9138000
esi: 5f78725f edi: c93dfde0 ebp: c9139f3c esp: c9139f2c
ds: 007b es: 007b ss: 0068
Process hald (pid: 4615, threadinfo=c9138000 task=c9092a80)

Stack: c1b0e268 c90c6658 00000000 c18a4a70 c9139f60 c018c8cd c8c0f3d0
c90c6658
       c93f87b0 c8c0f3d0 c90c6658 00000000 f731dab0 c9139f68 c018c86b
c9139f84
       c018aca9 c90c6658 f731dab0 c90c6658 f731dab0 00000010 c9139fb4
c018addb
Call Trace:
 [<c0104bde>] show_stack+0x9c/0xd2
 [<c0104dce>] show_registers+0x19a/0x234
 [<c0105049>] die+0x152/0x2e2
 [<c011d740>] do_page_fault+0x250/0x6fa
 [<c01046b7>] error_code+0x4f/0x54
 [<c018c8cd>] __fput+0x5c/0x174
 [<c018c86b>] fput+0x18/0x1e
 [<c018aca9>] filp_close+0x4a/0x70
 [<c018addb>] sys_close+0x10c/0x266
 [<c0103bb3>] sysenter_past_esp+0x54/0x75
Code: 78 85 db 74 08 89 1c 24 e8 68 c8 08 00 85 f6 74 39 b8 01 00 00 00

e8 c8 e5 f3 ff e8 51 1a 09 00 c1 e0 07 05 00 01 00 00 8d 04 06 <ff> 08 83 3e 02 74 3c b8 01 00 00 00 e8 d9 e5 f3 ff b8 00 e0 ff
<6>note: hald[4615] exited with preempt_count 1
Debug: sleeping function called from invalid context at include/linux/rwsem.h:43in_atomic():1, irqs_disabled():0

 [<c0104c32>] dump_stack+0x1e/0x20
 [<c0124b69>] __might_sleep+0x9e/0xad
 [<c012bf0f>] exit_mm+0x3a/0x2b0
 [<c012cd0a>] do_exit+0xe0/0x83b
 [<c01051cf>] die+0x2d8/0x2e2
 [<c011d740>] do_page_fault+0x250/0x6fa
 [<c01046b7>] error_code+0x4f/0x54
 [<c018c8cd>] __fput+0x5c/0x174
 [<c018c86b>] fput+0x18/0x1e
 [<c018aca9>] filp_close+0x4a/0x70
 [<c018addb>] sys_close+0x10c/0x266
 [<c0103bb3>] sysenter_past_esp+0x54/0x75
#6 lore raw
Quoted 9 lines

Thanks Dave,

I switched to the i915 kernel driver and still got the OOPS. I also continue to get the overlapping mtrr message. I am currently testing 2.6.13-rc2-git3. I have tried to run strace with hald, but cannot reproduce the problem this way. I am not sure I am invoking the command corrently. I have written to the hal developers, but have not received a response yet. Here's the current output:

Can you try and see if you apply the patch from

http://lkml.org/lkml/2005/7/8/257

It should apply to your kernel.. I cannot get this to happen on my system... the mtrr overlaps are just vesafb setting up the mtrrs, you might try without vesafb...

Dave.

Quoted 61 lines

mtrr: base(0xe8020000) is not aligned on a size(0x3c0000) boundary
mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x1000000
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.

Unable to handle kernel paging request at virtual address 5f78735f
 printing eip:
c01e491a
*pde = 00000000
Oops: 0002 [#1]
PREEMPT
Modules linked in: pcmcia ipv6 af_packet ohci1394 yenta_socket

rsrc_nonstatic pcmcia_core ipw2200 firmware_class ieee80211 ieee80211_crypt 8139too mii snd_intel8x0 snd_ac97_codec snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc i2c_i801 uhci_hcd rtc nls_cp437 sbp2 ieee1394 psmouse ide_cd cdrom

CPU:    0
EIP:    0060:[<c01e491a>]    Not tainted VLI
EFLAGS: 00010206   (2.6.13-rc2-git3)

EIP is at sysfs_release+0x4e/0xa6
eax: 5f78735f ebx: c1b0e268 ecx: 00000001 edx: c9138000
esi: 5f78725f edi: c93dfde0 ebp: c9139f3c esp: c9139f2c
ds: 007b es: 007b ss: 0068
Process hald (pid: 4615, threadinfo=c9138000 task=c9092a80)

Stack: c1b0e268 c90c6658 00000000 c18a4a70 c9139f60 c018c8cd c8c0f3d0
c90c6658
       c93f87b0 c8c0f3d0 c90c6658 00000000 f731dab0 c9139f68 c018c86b
c9139f84
       c018aca9 c90c6658 f731dab0 c90c6658 f731dab0 00000010 c9139fb4
c018addb
Call Trace:
 [<c0104bde>] show_stack+0x9c/0xd2
 [<c0104dce>] show_registers+0x19a/0x234
 [<c0105049>] die+0x152/0x2e2
 [<c011d740>] do_page_fault+0x250/0x6fa
 [<c01046b7>] error_code+0x4f/0x54
 [<c018c8cd>] __fput+0x5c/0x174
 [<c018c86b>] fput+0x18/0x1e
 [<c018aca9>] filp_close+0x4a/0x70
 [<c018addb>] sys_close+0x10c/0x266
 [<c0103bb3>] sysenter_past_esp+0x54/0x75
Code: 78 85 db 74 08 89 1c 24 e8 68 c8 08 00 85 f6 74 39 b8 01 00 00 00

e8 c8 e5 f3 ff e8 51 1a 09 00 c1 e0 07 05 00 01 00 00 8d 04 06 <ff> 08 83 3e 02 74 3c b8 01 00 00 00 e8 d9 e5 f3 ff b8 00 e0 ff
<6>note: hald[4615] exited with preempt_count 1
Debug: sleeping function called from invalid context at include/linux/rwsem.h:43in_atomic():1, irqs_disabled():0

 [<c0104c32>] dump_stack+0x1e/0x20
 [<c0124b69>] __might_sleep+0x9e/0xad
 [<c012bf0f>] exit_mm+0x3a/0x2b0
 [<c012cd0a>] do_exit+0xe0/0x83b
 [<c01051cf>] die+0x2d8/0x2e2
 [<c011d740>] do_page_fault+0x250/0x6fa
 [<c01046b7>] error_code+0x4f/0x54
 [<c018c8cd>] __fput+0x5c/0x174
 [<c018c86b>] fput+0x18/0x1e
 [<c018aca9>] filp_close+0x4a/0x70
 [<c018addb>] sys_close+0x10c/0x266
 [<c0103bb3>] sysenter_past_esp+0x54/0x75
author
#7 lore raw
Quoted 10 lines · Dave Airlie
Quoted 9 lines

Thanks Dave,

I switched to the i915 kernel driver and still got the OOPS. I also continue to get the overlapping mtrr message. I am currently testing 2.6.13-rc2-git3. I have tried to run strace with hald, but cannot reproduce the problem this way. I am not sure I am invoking the command corrently. I have written to the hal developers, but have not received a response yet. Here's the current output:

Quoted 7 lines

Can you try and see if you apply the patch from

http://lkml.org/lkml/2005/7/8/257

It should apply to your kernel.. I cannot get this to happen on my system... the mtrr overlaps are just vesafb setting up the mtrrs, you might try without vesafb...

I will try booting without vesafb enabled.

I get an error building with the patch applied to 2.6.13-rc2-git3:

arch/i386/kernel/built-in.o(.text+0x4010): In function `die':
arch/i386/kernel/traps.c:343: undefined reference to `last_sysfs_name'
make: *** [.tmp_vmlinux1] Error 1

Thanks,
Miles

#8 lore raw
Quoted 19 lines · On Wed, 13 Jul 2005 09:54:10 -0500 Miles Lane wrote:
Quoted 10 lines · Dave Airlie
Quoted 9 lines

Thanks Dave,

I switched to the i915 kernel driver and still got the OOPS. I also continue to get the overlapping mtrr message. I am currently testing 2.6.13-rc2-git3. I have tried to run strace with hald, but cannot reproduce the problem this way. I am not sure I am invoking the command corrently. I have written to the hal developers, but have not received a response yet. Here's the current output:

Quoted 7 lines

Can you try and see if you apply the patch from

http://lkml.org/lkml/2005/7/8/257

It should apply to your kernel.. I cannot get this to happen on my system... the mtrr overlaps are just vesafb setting up the mtrrs, you might try without vesafb...

Quoted 7 lines

I will try booting without vesafb enabled.

I get an error building with the patch applied to 2.6.13-rc2-git3:

arch/i386/kernel/built-in.o(.text+0x4010): In function `die':
arch/i386/kernel/traps.c:343: undefined reference to `last_sysfs_name'
make: *** [.tmp_vmlinux1] Error 1

Miles,
Here is an updated version of the patch that builds for me. (uses last_sysfs_file instead of last_sysfs_name)

---
~Randy

Track and print last_sysfs_file on oops.
---

 arch/i386/kernel/traps.c |    6 ++++++
 fs/sysfs/file.c          |    7 +++++++
 2 files changed, 13 insertions(+)
arch/i386/kernel/traps.c renamed from arch/i386/kernel/traps.c~last_sysfs_file +6 -0
diff -Naurp linux-2613-rc1-mm1/arch/i386/kernel/traps.c~last_sysfs_file linux-2613-rc1-mm1/arch/i386/kernel/traps.c
@@ -370,6 +370,12 @@ void die(const char * str, struct pt_reg
 #endif
 		if (nl)
 			printk("\n");
+		{
+			extern char last_sysfs_file[];
+
+			printk(KERN_ALERT "last sysfs file: %s\n",
+					last_sysfs_file);
+		}
 #ifdef CONFIG_KGDB
 	/* This is about the only place we want to go to kgdb even if in
 	 * user mode.  But we must go in via a trap so within kgdb we will
fs/sysfs/file.c renamed from fs/sysfs/file.c~last_sysfs_file +7 -0
diff -Naurp linux-2613-rc1-mm1/fs/sysfs/file.c~last_sysfs_file linux-2613-rc1-mm1/fs/sysfs/file.c
@@ -6,6 +6,8 @@
 #include <linux/fsnotify.h>
 #include <linux/kobject.h>
 #include <linux/namei.h>
+#include <linux/limits.h>
+
 #include <asm/uaccess.h>
 #include <asm/semaphore.h>
 
@@ -324,8 +326,13 @@ static int check_perm(struct inode * ino
 	return error;
 }
 
+char last_sysfs_file[PATH_MAX];
+
 static int sysfs_open_file(struct inode * inode, struct file * filp)
 {
+	d_path(filp->f_dentry, sysfs_mount, last_sysfs_file,
+			sizeof(last_sysfs_file));
+
 	return check_perm(inode,filp);
 }
 
#9 lore raw
Quoted 25 lines · randy_dunlap
Quoted 23 lines · On Wed, 13 Jul 2005 09:54:10 -0500 Miles Lane wrote:
Quoted 10 lines · Dave Airlie
Quoted 9 lines

Thanks Dave,

I switched to the i915 kernel driver and still got the OOPS. I also continue to get the overlapping mtrr message. I am currently testing 2.6.13-rc2-git3. I have tried to run strace with hald, but cannot reproduce the problem this way. I am not sure I am invoking the command corrently. I have written to the hal developers, but have not received a response yet. Here's the current output:

Quoted 7 lines

Can you try and see if you apply the patch from

http://lkml.org/lkml/2005/7/8/257

It should apply to your kernel.. I cannot get this to happen on my system... the mtrr overlaps are just vesafb setting up the mtrrs, you might try without vesafb...

I will try booting without vesafb enabled.

I get an error building with the patch applied to 2.6.13-rc2-git3:

Quoted 7 lines
Quoted 3 lines

arch/i386/kernel/built-in.o(.text+0x4010): In function `die':
arch/i386/kernel/traps.c:343: undefined reference to `last_sysfs_name'
make: *** [.tmp_vmlinux1] Error 1

Miles,
Here is an updated version of the patch that builds for me. (uses last_sysfs_file instead of last_sysfs_name)

I think I was able to reproduce this same bug on 2.6.13-rc4-mm1, here's the output (w/ apologies for long lines):

Unable to handle kernel paging request at virtual address 762f7473
 printing eip:
c01a8bcc
*pde = 00000000
Oops: 0002 [#1]
PREEMPT SMP DEBUG_PAGEALLOC
last sysfs file: /class/vc/vcs5/dev
Modules linked in: cpufreq_userspace cpufreq_stats freq_table cpufreq_powersave 

cpufreq_ondemand cpufreq_conservative ipv6 video thermal processor hotkey fan co ntainer button battery ac nfs lockd sunrpc af_packet tg3 ohci_hcd usbcore generi c serverworks i2c_piix4 i2c_core sworks_agp agpgart pcspkr rtc floppy tsdev dm_m od parport_pc lp parport ide_generic ide_disk ide_cd cdrom ide_core unix

CPU:    0
EIP:    0060:[<c01a8bcc>]    Not tainted VLI
EFLAGS: 00010246   (2.6.13-rc4-mm1) 

EIP is at sysfs_release+0x4c/0xb0
eax: 762f7373 ebx: 762f7373 ecx: 00000001 edx: ef3c5000
esi: f596a188 edi: f21fecc0 ebp: ef3c5f3c esp: ef3c5f2c
ds: 007b es: 007b ss: 0068
Process udev (pid: 11843, threadinfo=ef3c5000 task=ef78e550)

Stack: f596a188 00000010 f762d580 c21bc944 ef3c5f68 c0166cea c21bc944 f762d580 
       00000000 00000000 c2137980 ec7e9748 f762d580 dcae7300 00000000 ef3c5f78 
       c0166aeb f762d580 f762d580 ef3c5f94 c01650ab f762d580 dcae7300 dcae7300 
Call Trace:
 [<c010401f>] show_stack+0x7f/0xa0
 [<c01041d4>] show_registers+0x164/0x1d0
 [<c0104422>] die+0x122/0x1c0
 [<c030db1e>] do_page_fault+0x2ce/0x600
 [<c0103ccb>] error_code+0x4f/0x54
 [<c0166cea>] __fput+0x1da/0x1f0
 [<c0166aeb>] fput+0x2b/0x50
 [<c01650ab>] filp_close+0x4b/0x80
 [<c016514e>] sys_close+0x6e/0x90
 [<c010312f>] sysenter_past_esp+0x54/0x75
Code: 85 f6 8b 40 14 8b 58 04 74 08 89 34 24 e8 0d 97 04 00 85 db 74 38 b8 01 00
 00 00 e8 af 18 f7 ff e8 4a e5 04 00 c1 e0 07 8d 04 18 <ff> 88 00 01 00 00 83 3b
 02 74 49 b8 01 00 00 00 e8 cf 18 f7 ff 
 <6>note: udev[11843] exited with preempt_count 1

Using generic hotkey driver
ibm_acpi: acpi_evalf(DHKC, d, ...) failed: 4097
ibm_acpi: enable,0xffff' invalid for parameter hotkey'
toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
apm: BIOS not found.

Let me see if I can reproduce this on either 2.6.13-rc4 or 2.6.13-rc6

Machine is an IBM x335 (dual P4), and I'm not using any framebuffer stuff.

Sonny

#10 lore raw
Quoted 38 lines · Sonny Rao
Quoted 25 lines · randy_dunlap
Quoted 23 lines · On Wed, 13 Jul 2005 09:54:10 -0500 Miles Lane wrote:
Quoted 10 lines · Dave Airlie
Quoted 9 lines

Thanks Dave,

I switched to the i915 kernel driver and still got the OOPS. I also continue to get the overlapping mtrr message. I am currently testing 2.6.13-rc2-git3. I have tried to run strace with hald, but cannot reproduce the problem this way. I am not sure I am invoking the command corrently. I have written to the hal developers, but have not received a response yet. Here's the current output:

Quoted 7 lines

Can you try and see if you apply the patch from

http://lkml.org/lkml/2005/7/8/257

It should apply to your kernel.. I cannot get this to happen on my system... the mtrr overlaps are just vesafb setting up the mtrrs, you might try without vesafb...

I will try booting without vesafb enabled.

I get an error building with the patch applied to 2.6.13-rc2-git3:

Quoted 7 lines
Quoted 3 lines

arch/i386/kernel/built-in.o(.text+0x4010): In function `die':
arch/i386/kernel/traps.c:343: undefined reference to `last_sysfs_name'
make: *** [.tmp_vmlinux1] Error 1

Miles,
Here is an updated version of the patch that builds for me. (uses last_sysfs_file instead of last_sysfs_name)

I think I was able to reproduce this same bug on 2.6.13-rc4-mm1, here's the output (w/ apologies for long lines):

Quoted 7 lines
Unable to handle kernel paging request at virtual address 762f7473
 printing eip:
c01a8bcc
*pde = 00000000
Oops: 0002 [#1]

PREEMPT SMP DEBUG_PAGEALLOC
last sysfs file: /class/vc/vcs5/dev

gotcha.

Quoted 37 lines
Modules linked in: cpufreq_userspace cpufreq_stats freq_table cpufreq_powersave 

cpufreq_ondemand cpufreq_conservative ipv6 video thermal processor hotkey fan co ntainer button battery ac nfs lockd sunrpc af_packet tg3 ohci_hcd usbcore generi c serverworks i2c_piix4 i2c_core sworks_agp agpgart pcspkr rtc floppy tsdev dm_m od parport_pc lp parport ide_generic ide_disk ide_cd cdrom ide_core unix

CPU:    0
EIP:    0060:[<c01a8bcc>]    Not tainted VLI
EFLAGS: 00010246   (2.6.13-rc4-mm1) 

EIP is at sysfs_release+0x4c/0xb0
eax: 762f7373 ebx: 762f7373 ecx: 00000001 edx: ef3c5000
esi: f596a188 edi: f21fecc0 ebp: ef3c5f3c esp: ef3c5f2c
ds: 007b es: 007b ss: 0068
Process udev (pid: 11843, threadinfo=ef3c5000 task=ef78e550)

Stack: f596a188 00000010 f762d580 c21bc944 ef3c5f68 c0166cea c21bc944 f762d580 
       00000000 00000000 c2137980 ec7e9748 f762d580 dcae7300 00000000 ef3c5f78 
       c0166aeb f762d580 f762d580 ef3c5f94 c01650ab f762d580 dcae7300 dcae7300 
Call Trace:
 [<c010401f>] show_stack+0x7f/0xa0
 [<c01041d4>] show_registers+0x164/0x1d0
 [<c0104422>] die+0x122/0x1c0
 [<c030db1e>] do_page_fault+0x2ce/0x600
 [<c0103ccb>] error_code+0x4f/0x54
 [<c0166cea>] __fput+0x1da/0x1f0
 [<c0166aeb>] fput+0x2b/0x50
 [<c01650ab>] filp_close+0x4b/0x80
 [<c016514e>] sys_close+0x6e/0x90
 [<c010312f>] sysenter_past_esp+0x54/0x75
Code: 85 f6 8b 40 14 8b 58 04 74 08 89 34 24 e8 0d 97 04 00 85 db 74 38 b8 01 00
 00 00 e8 af 18 f7 ff e8 4a e5 04 00 c1 e0 07 8d 04 18 <ff> 88 00 01 00 00 83 3b
 02 74 49 b8 01 00 00 00 e8 cf 18 f7 ff 
 <6>note: udev[11843] exited with preempt_count 1

Using generic hotkey driver
ibm_acpi: acpi_evalf(DHKC, d, ...) failed: 4097
ibm_acpi: enable,0xffff' invalid for parameter hotkey'
toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
apm: BIOS not found.

Quoted 5 lines

Let me see if I can reproduce this on either 2.6.13-rc4 or 2.6.13-rc6

Machine is an IBM x335 (dual P4), and I'm not using any framebuffer stuff.

Keith, does this look like the use-after-free which you've been hitting?

#11 lore raw
Quoted 86 lines · Andrew Morton
Quoted 38 lines · Sonny Rao
Quoted 25 lines · randy_dunlap
Quoted 23 lines · On Wed, 13 Jul 2005 09:54:10 -0500 Miles Lane wrote:
Quoted 10 lines · Dave Airlie
Quoted 9 lines

Thanks Dave,

I switched to the i915 kernel driver and still got the OOPS. I also continue to get the overlapping mtrr message. I am currently testing 2.6.13-rc2-git3. I have tried to run strace with hald, but cannot reproduce the problem this way. I am not sure I am invoking the command corrently. I have written to the hal developers, but have not received a response yet. Here's the current output:

Quoted 7 lines

Can you try and see if you apply the patch from

http://lkml.org/lkml/2005/7/8/257

It should apply to your kernel.. I cannot get this to happen on my system... the mtrr overlaps are just vesafb setting up the mtrrs, you might try without vesafb...

I will try booting without vesafb enabled.

I get an error building with the patch applied to 2.6.13-rc2-git3:

Quoted 7 lines
Quoted 3 lines

arch/i386/kernel/built-in.o(.text+0x4010): In function `die':
arch/i386/kernel/traps.c:343: undefined reference to `last_sysfs_name'
make: *** [.tmp_vmlinux1] Error 1

Miles,
Here is an updated version of the patch that builds for me. (uses last_sysfs_file instead of last_sysfs_name)

I think I was able to reproduce this same bug on 2.6.13-rc4-mm1, here's the output (w/ apologies for long lines):

Quoted 7 lines
Unable to handle kernel paging request at virtual address 762f7473
 printing eip:
c01a8bcc
*pde = 00000000
Oops: 0002 [#1]

PREEMPT SMP DEBUG_PAGEALLOC
last sysfs file: /class/vc/vcs5/dev

gotcha.

Quoted 37 lines
Modules linked in: cpufreq_userspace cpufreq_stats freq_table cpufreq_powersave 

cpufreq_ondemand cpufreq_conservative ipv6 video thermal processor hotkey fan co ntainer button battery ac nfs lockd sunrpc af_packet tg3 ohci_hcd usbcore generi c serverworks i2c_piix4 i2c_core sworks_agp agpgart pcspkr rtc floppy tsdev dm_m od parport_pc lp parport ide_generic ide_disk ide_cd cdrom ide_core unix

CPU:    0
EIP:    0060:[<c01a8bcc>]    Not tainted VLI
EFLAGS: 00010246   (2.6.13-rc4-mm1) 

EIP is at sysfs_release+0x4c/0xb0
eax: 762f7373 ebx: 762f7373 ecx: 00000001 edx: ef3c5000
esi: f596a188 edi: f21fecc0 ebp: ef3c5f3c esp: ef3c5f2c
ds: 007b es: 007b ss: 0068
Process udev (pid: 11843, threadinfo=ef3c5000 task=ef78e550)

Stack: f596a188 00000010 f762d580 c21bc944 ef3c5f68 c0166cea c21bc944 f762d580 
       00000000 00000000 c2137980 ec7e9748 f762d580 dcae7300 00000000 ef3c5f78 
       c0166aeb f762d580 f762d580 ef3c5f94 c01650ab f762d580 dcae7300 dcae7300 
Call Trace:
 [<c010401f>] show_stack+0x7f/0xa0
 [<c01041d4>] show_registers+0x164/0x1d0
 [<c0104422>] die+0x122/0x1c0
 [<c030db1e>] do_page_fault+0x2ce/0x600
 [<c0103ccb>] error_code+0x4f/0x54
 [<c0166cea>] __fput+0x1da/0x1f0
 [<c0166aeb>] fput+0x2b/0x50
 [<c01650ab>] filp_close+0x4b/0x80
 [<c016514e>] sys_close+0x6e/0x90
 [<c010312f>] sysenter_past_esp+0x54/0x75
Code: 85 f6 8b 40 14 8b 58 04 74 08 89 34 24 e8 0d 97 04 00 85 db 74 38 b8 01 00
 00 00 e8 af 18 f7 ff e8 4a e5 04 00 c1 e0 07 8d 04 18 <ff> 88 00 01 00 00 83 3b
 02 74 49 b8 01 00 00 00 e8 cf 18 f7 ff 
 <6>note: udev[11843] exited with preempt_count 1

Using generic hotkey driver
ibm_acpi: acpi_evalf(DHKC, d, ...) failed: 4097
ibm_acpi: enable,0xffff' invalid for parameter hotkey'
toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
apm: BIOS not found.

Quoted 7 lines
Quoted 5 lines

Let me see if I can reproduce this on either 2.6.13-rc4 or 2.6.13-rc6

Machine is an IBM x335 (dual P4), and I'm not using any framebuffer stuff.

Keith, does this look like the use-after-free which you've been hitting?

So, I've tried reproducing on 2.6.13-rc6, 2.6.13-rc5-mm1, and (the original kernel where I hit this) 2.6.13-rc4-mm1

I haven't been able to reproduce at all, unfortunately... As Keith noted before, this one is pretty elusive. I'm still up for trying patches and rebooting a million times if someone has an idea.

Sonny

#12 lore raw
In reply to Andrew Morton
Quoted 38 lines · Andrew Morton
Quoted 37 lines · Sonny Rao
Modules linked in: cpufreq_userspace cpufreq_stats freq_table cpufreq_powersave 

cpufreq_ondemand cpufreq_conservative ipv6 video thermal processor hotkey fan co ntainer button battery ac nfs lockd sunrpc af_packet tg3 ohci_hcd usbcore generi c serverworks i2c_piix4 i2c_core sworks_agp agpgart pcspkr rtc floppy tsdev dm_m od parport_pc lp parport ide_generic ide_disk ide_cd cdrom ide_core unix

CPU:    0
EIP:    0060:[<c01a8bcc>]    Not tainted VLI
EFLAGS: 00010246   (2.6.13-rc4-mm1) 

EIP is at sysfs_release+0x4c/0xb0
eax: 762f7373 ebx: 762f7373 ecx: 00000001 edx: ef3c5000
esi: f596a188 edi: f21fecc0 ebp: ef3c5f3c esp: ef3c5f2c
ds: 007b es: 007b ss: 0068
Process udev (pid: 11843, threadinfo=ef3c5000 task=ef78e550)

Stack: f596a188 00000010 f762d580 c21bc944 ef3c5f68 c0166cea c21bc944 f762d580 
       00000000 00000000 c2137980 ec7e9748 f762d580 dcae7300 00000000 ef3c5f78 
       c0166aeb f762d580 f762d580 ef3c5f94 c01650ab f762d580 dcae7300 dcae7300 
Call Trace:
 [<c010401f>] show_stack+0x7f/0xa0
 [<c01041d4>] show_registers+0x164/0x1d0
 [<c0104422>] die+0x122/0x1c0
 [<c030db1e>] do_page_fault+0x2ce/0x600
 [<c0103ccb>] error_code+0x4f/0x54
 [<c0166cea>] __fput+0x1da/0x1f0
 [<c0166aeb>] fput+0x2b/0x50
 [<c01650ab>] filp_close+0x4b/0x80
 [<c016514e>] sys_close+0x6e/0x90
 [<c010312f>] sysenter_past_esp+0x54/0x75
Code: 85 f6 8b 40 14 8b 58 04 74 08 89 34 24 e8 0d 97 04 00 85 db 74 38 b8 01 00
 00 00 e8 af 18 f7 ff e8 4a e5 04 00 c1 e0 07 8d 04 18 <ff> 88 00 01 00 00 83 3b
 02 74 49 b8 01 00 00 00 e8 cf 18 f7 ff 
 <6>note: udev[11843] exited with preempt_count 1

Using generic hotkey driver
ibm_acpi: acpi_evalf(DHKC, d, ...) failed: 4097
ibm_acpi: enable,0xffff' invalid for parameter hotkey'
toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
apm: BIOS not found.

Quoted 7 lines
Quoted 5 lines

Let me see if I can reproduce this on either 2.6.13-rc4 or 2.6.13-rc6

Machine is an IBM x335 (dual P4), and I'm not using any framebuffer stuff.

Keith, does this look like the use-after-free which you've been hitting?

It is certainly in the same place, freeing the data that is chained off sd->s_element. This oops does not show any memory poisoning, but I am guessing that the kernel was not compiled with slab debugging. On balance, it looks like the same problem.

#13 lore raw
Quoted 46 lines · Keith Owens
Quoted 44 lines · Andrew Morton
Quoted 42 lines · Sonny Rao
Modules linked in: cpufreq_userspace cpufreq_stats freq_table cpufreq_powersave 

cpufreq_ondemand cpufreq_conservative ipv6 video thermal processor hotkey fan co ntainer button battery ac nfs lockd sunrpc af_packet tg3 ohci_hcd usbcore generi c serverworks i2c_piix4 i2c_core sworks_agp agpgart pcspkr rtc floppy tsdev dm_m od parport_pc lp parport ide_generic ide_disk ide_cd cdrom ide_core unix

CPU:    0
EIP:    0060:[<c01a8bcc>]    Not tainted VLI
EFLAGS: 00010246   (2.6.13-rc4-mm1) 

EIP is at sysfs_release+0x4c/0xb0
eax: 762f7373 ebx: 762f7373 ecx: 00000001 edx: ef3c5000
esi: f596a188 edi: f21fecc0 ebp: ef3c5f3c esp: ef3c5f2c
ds: 007b es: 007b ss: 0068
Process udev (pid: 11843, threadinfo=ef3c5000 task=ef78e550)

Stack: f596a188 00000010 f762d580 c21bc944 ef3c5f68 c0166cea c21bc944 f762d580 
       00000000 00000000 c2137980 ec7e9748 f762d580 dcae7300 00000000 ef3c5f78 
       c0166aeb f762d580 f762d580 ef3c5f94 c01650ab f762d580 dcae7300 dcae7300 
Call Trace:
 [<c010401f>] show_stack+0x7f/0xa0
 [<c01041d4>] show_registers+0x164/0x1d0
 [<c0104422>] die+0x122/0x1c0
 [<c030db1e>] do_page_fault+0x2ce/0x600
 [<c0103ccb>] error_code+0x4f/0x54
 [<c0166cea>] __fput+0x1da/0x1f0
 [<c0166aeb>] fput+0x2b/0x50
 [<c01650ab>] filp_close+0x4b/0x80
 [<c016514e>] sys_close+0x6e/0x90
 [<c010312f>] sysenter_past_esp+0x54/0x75
Code: 85 f6 8b 40 14 8b 58 04 74 08 89 34 24 e8 0d 97 04 00 85 db 74 38 b8 01 00
 00 00 e8 af 18 f7 ff e8 4a e5 04 00 c1 e0 07 8d 04 18 <ff> 88 00 01 00 00 83 3b
 02 74 49 b8 01 00 00 00 e8 cf 18 f7 ff 
 <6>note: udev[11843] exited with preempt_count 1

Using generic hotkey driver
ibm_acpi: acpi_evalf(DHKC, d, ...) failed: 4097
ibm_acpi: enable,0xffff' invalid for parameter hotkey'
toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
apm: BIOS not found.

Let me see if I can reproduce this on either 2.6.13-rc4 or 2.6.13-rc6

Machine is an IBM x335 (dual P4), and I'm not using any framebuffer stuff.

Quoted 6 lines
Quoted 1 line

Keith, does this look like the use-after-free which you've been hitting?

It is certainly in the same place, freeing the data that is chained off sd->s_element. This oops does not show any memory poisoning, but I am guessing that the kernel was not compiled with slab debugging. On balance, it looks like the same problem.

You are correct; I didn't have slab debugging on.