kbuild fixes
Subsystems (7)
PATCH 1/1 kbuild fixes
Hi Linus.
First round of small kbuild fixes (it's monday here in 15 minutes).
o Rename prepare to archprepare to get dependency order correct
o fix silentoldconfig with make O=
o rename mips/kernel/offset.c to asm-offsets.c
Can be pulled from:
www.kernel.org/pub/scm/linux/kernel/git/sam/kbuild.git
I've started suing the alternate format as you described. So I cannot pull from that respository myself.
http: + rsync: failed?
I hope you know a few smart tricks.
diffstat - the major part is the rename.
The rest is only a few lines / one-liners.
Makefile | 1 arch/mips/kernel/offset.c | 314 ----------------------------------- b/Documentation/kbuild/makefiles.txt | 14 - b/Makefile | 23 +- b/arch/arm/Makefile | 2 b/arch/cris/Makefile | 2 b/arch/ia64/Makefile | 2 b/arch/mips/kernel/asm-offsets.c | 314 +++++++++++++++++++++++++++++++++++ b/arch/ppc/Makefile | 2 b/arch/sh/Makefile | 2 b/arch/sh64/Makefile | 2 b/arch/um/Makefile | 2 b/arch/xtensa/Makefile | 2 13 files changed, 345 insertions(+), 337 deletions(-)
Patches will follow.
Sam
PATCH 1/3 kbuild: rename prepare to archprepare to fix dependency chain
Subject: [PATCH 1/3] kbuild: rename prepare to archprepare to fix dependency chain
When introducing the generic asm-offsets.h support the dependency chain for the prepare targets was changed. All build scripts expecting include/asm/asm-offsets.h to be made when using the prepare target would broke. With the limited number of prepare targets left in arch Makefiles the trivial solution was to introduce a new arch specific target: archprepare
The dependency chain looks like this now:
prepare
|
+--> prepare0
|
+--> archprepare
|
+--> scripts_basic
+--> prepare1
|
+---> prepare2
|
+--> prepare3So prepare 3 is processed before prepare2 etc.
This guaantees that the asm symlink, version.h, scripts_basic are all updated before archprepare is processed.
prepare0 which build the asm-offsets.h file will need the actions performed by archprepare.
The head target is now named prepare, because users scripts will most likely use that target, but prepare-all has been kept for compatibility. Updated Documentation/kbuild/makefiles.txt.
---
Documentation/kbuild/makefiles.txt | 14 +++++++------- Makefile | 23 +++++++++++++++-------- arch/arm/Makefile | 2 +- arch/cris/Makefile | 2 +- arch/ia64/Makefile | 2 +- arch/ppc/Makefile | 2 +- arch/sh/Makefile | 2 +- arch/sh64/Makefile | 2 +- arch/um/Makefile | 2 +- arch/xtensa/Makefile | 2 +- 10 files changed, 30 insertions(+), 23 deletions(-)
5bb78269000cf326bfdfa19f79449c02a9158020
Documentation/kbuild/makefiles.txt +7 -7
@@ -31,7 +31,7 @@ This document describes the Linux kernel === 6 Architecture Makefiles --- 6.1 Set variables to tweak the build to the architecture - --- 6.2 Add prerequisites to prepare: + --- 6.2 Add prerequisites to archprepare: --- 6.3 List directories to visit when descending --- 6.4 Architecture specific boot images --- 6.5 Building non-kbuild targets
@@ -734,18 +734,18 @@ When kbuild executes the following steps for loadable kernel modules. ---- 6.2 Add prerequisites to prepare: +--- 6.2 Add prerequisites to archprepare: - The prepare: rule is used to list prerequisites that needs to be + The archprepare: rule is used to list prerequisites that needs to be built before starting to descend down in the subdirectories. This is usual header files containing assembler constants. Example: - #arch/s390/Makefile - prepare: include/asm-$(ARCH)/offsets.h + #arch/arm/Makefile + archprepare: maketools - In this example the file include/asm-$(ARCH)/offsets.h will - be built before descending down in the subdirectories. + In this example the file target maketools will be processed + before descending down in the subdirectories. See also chapter XXX-TODO that describe how kbuild supports generating offset header files.
Makefile +15 -8
@@ -776,15 +776,20 @@ $(sort $(vmlinux-init) $(vmlinux-main)) # Error messages still appears in the original language .PHONY: $(vmlinux-dirs) -$(vmlinux-dirs): prepare-all scripts +$(vmlinux-dirs): prepare scripts $(Q)$(MAKE) $(build)=$@ # Things we need to do before we recursively start building the kernel -# or the modules are listed in "prepare-all". -# A multi level approach is used. prepare1 is updated first, then prepare0. -# prepare-all is the collection point for the prepare targets. +# or the modules are listed in "prepare". +# A multi level approach is used. prepareN is processed before prepareN-1. +# archprepare is used in arch Makefiles and when processed asm symlink, +# version.h and scripts_basic is processed / created. -.PHONY: prepare-all prepare prepare0 prepare1 prepare2 prepare3 +# Listed in dependency order +.PHONY: prepare archprepare prepare0 prepare1 prepare2 prepare3 + +# prepare-all is deprecated, use prepare as valid replacement +.PHONY: prepare-all # prepare3 is used to check if we are building in a separate output directory, # and if so do:
@@ -813,11 +818,13 @@ ifneq ($(KBUILD_MODULES),) $(Q)mkdir -p $(MODVERDIR) endif -prepare0: prepare prepare1 FORCE +archprepare: prepare1 scripts_basic + +prepare0: archprepare FORCE $(Q)$(MAKE) $(build)=. # All the preparing.. -prepare-all: prepare0 +prepare prepare-all: prepare0 # Leave this as default for preprocessing vmlinux.lds.S, which is now # done in arch/$(ARCH)/kernel/Makefile
@@ -908,7 +915,7 @@ modules: $(vmlinux-dirs) $(if $(KBUILD_B # Target to prepare building external modules .PHONY: modules_prepare -modules_prepare: prepare-all scripts +modules_prepare: prepare scripts # Target to install modules .PHONY: modules_install
arch/arm/Makefile +1 -1
@@ -175,7 +175,7 @@ else endif @touch $@ -prepare: maketools include/asm-arm/.arch +archprepare: maketools include/asm-arm/.arch .PHONY: maketools FORCE maketools: include/linux/version.h FORCE
arch/cris/Makefile +1 -1
@@ -107,7 +107,7 @@ archclean: rm -f timage vmlinux.bin decompress.bin rescue.bin cramfs.img rm -rf $(LD_SCRIPT).tmp -prepare: $(SRC_ARCH)/.links $(srctree)/include/asm-$(ARCH)/.arch +archprepare: $(SRC_ARCH)/.links $(srctree)/include/asm-$(ARCH)/.arch # Create some links to make all tools happy $(SRC_ARCH)/.links:
arch/ia64/Makefile +1 -1
@@ -82,7 +82,7 @@ unwcheck: vmlinux archclean: $(Q)$(MAKE) $(clean)=$(boot) -prepare: include/asm-ia64/.offsets.h.stamp +archprepare: include/asm-ia64/.offsets.h.stamp include/asm-ia64/.offsets.h.stamp: mkdir -p include/asm-ia64
arch/ppc/Makefile +1 -1
@@ -107,7 +107,7 @@ archclean: # Temporary hack until we have migrated to asm-powerpc $(Q)rm -rf arch/$(ARCH)/include -prepare: checkbin +archprepare: checkbin # Temporary hack until we have migrated to asm-powerpc include/asm: arch/$(ARCH)/include/asm
arch/sh/Makefile +1 -1
@@ -152,7 +152,7 @@ endif @touch $@ -prepare: maketools include/asm-sh/.cpu include/asm-sh/.mach +archprepare: maketools include/asm-sh/.cpu include/asm-sh/.mach .PHONY: maketools FORCE maketools: include/linux/version.h FORCE
arch/sh64/Makefile +1 -1
@@ -73,7 +73,7 @@ compressed: zImage archclean: $(Q)$(MAKE) $(clean)=$(boot) -prepare: arch/$(ARCH)/lib/syscalltab.h +archprepare: arch/$(ARCH)/lib/syscalltab.h define filechk_gen-syscalltab (set -e; \
arch/um/Makefile +1 -1
@@ -107,7 +107,7 @@ else $(shell cd $(ARCH_DIR) && ln -sf Kconfig.$(SUBARCH) Kconfig.arch) endif -prepare: $(ARCH_SYMLINKS) $(SYS_HEADERS) $(GEN_HEADERS) +archprepare: $(ARCH_SYMLINKS) $(SYS_HEADERS) $(GEN_HEADERS) LINK-$(CONFIG_LD_SCRIPT_STATIC) += -static LINK-$(CONFIG_LD_SCRIPT_DYN) += -Wl,-rpath,/lib
arch/xtensa/Makefile +1 -1
@@ -66,7 +66,7 @@ boot := arch/xtensa/boot archinc := include/asm-xtensa -prepare: $(archinc)/.platform +archprepare: $(archinc)/.platform # Update machine cpu and platform symlinks if something which affects # them changed.
PATCH 2/3 kbuild: fix silentoldconfig with make O=
In reply to Sam RavnborgSubject: [PATCH 2/3] kbuild: fix silentoldconfig with make O=
Al Viro reported that sometimes silentoldconfig failed because output directory was missing.
So create it unconditionally before executing conf
---
Makefile | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)
5011cdd01bedd66b314e330a638c97984c71b53d
Makefile +1 -0
@@ -491,6 +491,7 @@ include .config # If .config is newer than include/linux/autoconf.h, someone tinkered # with it and forgot to run make oldconfig include/linux/autoconf.h: .config + $(Q)mkdir -p include/linux $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig else # Dummy target needed, because used as prerequisite
PATCH 3/3 mips: rename offsets.c to asm-offsets.c
In reply to Sam RavnborgSubject: [PATCH 3/3] mips: rename offsets.c to asm-offsets.c
Cannot build MIPS now.
We need to change offset.c to asm-offsets.c
---
arch/mips/kernel/asm-offsets.c | 314 ++++++++++++++++++++++++++++++++++++++++ arch/mips/kernel/offset.c | 314 ---------------------------------------- 2 files changed, 314 insertions(+), 314 deletions(-) create mode 100644 arch/mips/kernel/asm-offsets.c delete mode 100644 arch/mips/kernel/offset.c
e6c69bd39199656a8bbd0569edaff60574ff9cac
arch/mips/kernel/asm-offsets.c new file +314 -0
@@ -0,0 +1,314 @@ +/* +* offset.c: Calculate pt_regs and task_struct offsets. +* +* Copyright (C) 1996 David S. Miller +* Copyright (C) 1997, 1998, 1999, 2000, 2001, 2002, 2003 Ralf Baechle +* Copyright (C) 1999, 2000 Silicon Graphics, Inc. +* +* Kevin Kissell, [email protected] and Carsten Langgaard, [email protected] +* Copyright (C) 2000 MIPS Technologies, Inc. +*/ +#include <linux/config.h> +#include <linux/compat.h> +#include <linux/types.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/interrupt.h> + +#include <asm/ptrace.h> +#include <asm/processor.h> + +#define text (t) __asm__("\n@@@" t) +#define _offset (type, member) (&(((type *)NULL)->member)) +#define offset (string, ptr, member) \ + __asm__("\n@@@" string "%0" : : "i" (_offset(ptr, member))) +#define constant (string, member) \ + __asm__("\n@@@" string "%x0" : : "ri" (member)) +#define size (string, size) \ + __asm__("\n@@@" string "%0" : : "i" (sizeof(size))) +#define linefeed text("") + +void output_ptreg_defines (void ) +{ +text ("/* MIPS pt_regs offsets. */" ); + offset("#define PT_R0 ", struct pt_regs, regs[0]); + offset("#define PT_R1 ", struct pt_regs, regs[1]); + offset("#define PT_R2 ", struct pt_regs, regs[2]); + offset("#define PT_R3 ", struct pt_regs, regs[3]); + offset("#define PT_R4 ", struct pt_regs, regs[4]); + offset("#define PT_R5 ", struct pt_regs, regs[5]); + offset("#define PT_R6 ", struct pt_regs, regs[6]); + offset("#define PT_R7 ", struct pt_regs, regs[7]); + offset("#define PT_R8 ", struct pt_regs, regs[8]); + offset("#define PT_R9 ", struct pt_regs, regs[9]); + offset("#define PT_R10 ", struct pt_regs, regs[10]); + offset("#define PT_R11 ", struct pt_regs, regs[11]); + offset("#define PT_R12 ", struct pt_regs, regs[12]); + offset("#define PT_R13 ", struct pt_regs, regs[13]); + offset("#define PT_R14 ", struct pt_regs, regs[14]); + offset("#define PT_R15 ", struct pt_regs, regs[15]); + offset("#define PT_R16 ", struct pt_regs, regs[16]); + offset("#define PT_R17 ", struct pt_regs, regs[17]); + offset("#define PT_R18 ", struct pt_regs, regs[18]); + offset("#define PT_R19 ", struct pt_regs, regs[19]); + offset("#define PT_R20 ", struct pt_regs, regs[20]); + offset("#define PT_R21 ", struct pt_regs, regs[21]); + offset("#define PT_R22 ", struct pt_regs, regs[22]); + offset("#define PT_R23 ", struct pt_regs, regs[23]); + offset("#define PT_R24 ", struct pt_regs, regs[24]); + offset("#define PT_R25 ", struct pt_regs, regs[25]); + offset("#define PT_R26 ", struct pt_regs, regs[26]); + offset("#define PT_R27 ", struct pt_regs, regs[27]); + offset("#define PT_R28 ", struct pt_regs, regs[28]); + offset("#define PT_R29 ", struct pt_regs, regs[29]); + offset("#define PT_R30 ", struct pt_regs, regs[30]); + offset("#define PT_R31 ", struct pt_regs, regs[31]); + offset("#define PT_LO ", struct pt_regs, lo); + offset("#define PT_HI ", struct pt_regs, hi); + offset("#define PT_EPC ", struct pt_regs, cp0_epc); + offset("#define PT_BVADDR ", struct pt_regs, cp0_badvaddr); + offset("#define PT_STATUS ", struct pt_regs, cp0_status); + offset("#define PT_CAUSE ", struct pt_regs, cp0_cause); + size("#define PT_SIZE ", struct pt_regs); + linefeed; +} + +void output_task_defines (void ) +{ +text ("/* MIPS task_struct offsets. */" ); + offset("#define TASK_STATE ", struct task_struct, state); + offset("#define TASK_THREAD_INFO ", struct task_struct, thread_info); + offset("#define TASK_FLAGS ", struct task_struct, flags); + offset("#define TASK_MM ", struct task_struct, mm); + offset("#define TASK_PID ", struct task_struct, pid); + size( "#define TASK_STRUCT_SIZE ", struct task_struct); + linefeed; +} + +void output_thread_info_defines (void ) +{ +text ("/* MIPS thread_info offsets. */" ); + offset("#define TI_TASK ", struct thread_info, task); + offset("#define TI_EXEC_DOMAIN ", struct thread_info, exec_domain); + offset("#define TI_FLAGS ", struct thread_info, flags); + offset("#define TI_CPU ", struct thread_info, cpu); + offset("#define TI_PRE_COUNT ", struct thread_info, preempt_count); + offset("#define TI_ADDR_LIMIT ", struct thread_info, addr_limit); + offset("#define TI_RESTART_BLOCK ", struct thread_info, restart_block); +constant ("#define _THREAD_SIZE_ORDER " ,THREAD_SIZE_ORDER ); +constant ("#define _THREAD_SIZE " ,THREAD_SIZE ); +constant ("#define _THREAD_MASK " ,THREAD_MASK ); + linefeed; +} + +void output_thread_defines (void ) +{ +text ("/* MIPS specific thread_struct offsets. */" ); + offset("#define THREAD_REG16 ", struct task_struct, thread.reg16); + offset("#define THREAD_REG17 ", struct task_struct, thread.reg17); + offset("#define THREAD_REG18 ", struct task_struct, thread.reg18); + offset("#define THREAD_REG19 ", struct task_struct, thread.reg19); + offset("#define THREAD_REG20 ", struct task_struct, thread.reg20); + offset("#define THREAD_REG21 ", struct task_struct, thread.reg21); + offset("#define THREAD_REG22 ", struct task_struct, thread.reg22); + offset("#define THREAD_REG23 ", struct task_struct, thread.reg23); + offset("#define THREAD_REG29 ", struct task_struct, thread.reg29); + offset("#define THREAD_REG30 ", struct task_struct, thread.reg30); + offset("#define THREAD_REG31 ", struct task_struct, thread.reg31); + offset("#define THREAD_STATUS ", struct task_struct, + thread.cp0_status); + offset("#define THREAD_FPU ", struct task_struct, thread.fpu); + + offset("#define THREAD_BVADDR ", struct task_struct, \ + thread.cp0_badvaddr); + offset("#define THREAD_BUADDR ", struct task_struct, \ + thread.cp0_baduaddr); + offset("#define THREAD_ECODE ", struct task_struct, \ + thread.error_code); + offset("#define THREAD_TRAPNO ", struct task_struct, thread.trap_no); + offset("#define THREAD_MFLAGS ", struct task_struct, thread.mflags); + offset("#define THREAD_TRAMP ", struct task_struct, \ + thread.irix_trampoline); + offset("#define THREAD_OLDCTX ", struct task_struct, \ + thread.irix_oldctx); + linefeed; +} + +void output_thread_fpu_defines (void ) +{ +offset ("#define THREAD_FPR0 " , + struct task_struct, thread.fpu.hard.fpr[0]); +offset ("#define THREAD_FPR1 " , + struct task_struct, thread.fpu.hard.fpr[1]); +offset ("#define THREAD_FPR2 " , + struct task_struct, thread.fpu.hard.fpr[2]); +offset ("#define THREAD_FPR3 " , + struct task_struct, thread.fpu.hard.fpr[3]); +offset ("#define THREAD_FPR4 " , + struct task_struct, thread.fpu.hard.fpr[4]); +offset ("#define THREAD_FPR5 " , + struct task_struct, thread.fpu.hard.fpr[5]); +offset ("#define THREAD_FPR6 " , + struct task_struct, thread.fpu.hard.fpr[6]); +offset ("#define THREAD_FPR7 " , + struct task_struct, thread.fpu.hard.fpr[7]); +offset ("#define THREAD_FPR8 " , + struct task_struct, thread.fpu.hard.fpr[8]); +offset ("#define THREAD_FPR9 " , + struct task_struct, thread.fpu.hard.fpr[9]); +offset ("#define THREAD_FPR10 " , + struct task_struct, thread.fpu.hard.fpr[10]); +offset ("#define THREAD_FPR11 " , + struct task_struct, thread.fpu.hard.fpr[11]); +offset ("#define THREAD_FPR12 " , + struct task_struct, thread.fpu.hard.fpr[12]); +offset ("#define THREAD_FPR13 " , + struct task_struct, thread.fpu.hard.fpr[13]); +offset ("#define THREAD_FPR14 " , + struct task_struct, thread.fpu.hard.fpr[14]); +offset ("#define THREAD_FPR15 " , + struct task_struct, thread.fpu.hard.fpr[15]); +offset ("#define THREAD_FPR16 " , + struct task_struct, thread.fpu.hard.fpr[16]); +offset ("#define THREAD_FPR17 " , + struct task_struct, thread.fpu.hard.fpr[17]); +offset ("#define THREAD_FPR18 " , + struct task_struct, thread.fpu.hard.fpr[18]); +offset ("#define THREAD_FPR19 " , + struct task_struct, thread.fpu.hard.fpr[19]); +offset ("#define THREAD_FPR20 " , + struct task_struct, thread.fpu.hard.fpr[20]); +offset ("#define THREAD_FPR21 " , + struct task_struct, thread.fpu.hard.fpr[21]); +offset ("#define THREAD_FPR22 " , + struct task_struct, thread.fpu.hard.fpr[22]); +offset ("#define THREAD_FPR23 " , + struct task_struct, thread.fpu.hard.fpr[23]); +offset ("#define THREAD_FPR24 " , + struct task_struct, thread.fpu.hard.fpr[24]); +offset ("#define THREAD_FPR25 " , + struct task_struct, thread.fpu.hard.fpr[25]); +offset ("#define THREAD_FPR26 " , + struct task_struct, thread.fpu.hard.fpr[26]); +offset ("#define THREAD_FPR27 " , + struct task_struct, thread.fpu.hard.fpr[27]); +offset ("#define THREAD_FPR28 " , + struct task_struct, thread.fpu.hard.fpr[28]); +offset ("#define THREAD_FPR29 " , + struct task_struct, thread.fpu.hard.fpr[29]); +offset ("#define THREAD_FPR30 " , + struct task_struct, thread.fpu.hard.fpr[30]); +offset ("#define THREAD_FPR31 " , + struct task_struct, thread.fpu.hard.fpr[31]); + +offset ("#define THREAD_FCR31 " , + struct task_struct, thread.fpu.hard.fcr31); + linefeed; +} + +void output_mm_defines (void ) +{ +text ("/* Size of struct page */" ); + size("#define STRUCT_PAGE_SIZE ", struct page); + linefeed; +text ("/* Linux mm_struct offsets. */" ); + offset("#define MM_USERS ", struct mm_struct, mm_users); + offset("#define MM_PGD ", struct mm_struct, pgd); + offset("#define MM_CONTEXT ", struct mm_struct, context); + linefeed; +constant ("#define _PAGE_SIZE " ,PAGE_SIZE ); +constant ("#define _PAGE_SHIFT " ,PAGE_SHIFT ); + linefeed; +constant ("#define _PGD_T_SIZE " ,sizeof (pgd_t)); +constant ("#define _PMD_T_SIZE " ,sizeof (pmd_t)); +constant ("#define _PTE_T_SIZE " ,sizeof (pte_t)); + linefeed; +constant ("#define _PGD_T_LOG2 " ,PGD_T_LOG2 ); +constant ("#define _PMD_T_LOG2 " ,PMD_T_LOG2 ); +constant ("#define _PTE_T_LOG2 " ,PTE_T_LOG2 ); + linefeed; +constant ("#define _PMD_SHIFT " ,PMD_SHIFT ); +constant ("#define _PGDIR_SHIFT " ,PGDIR_SHIFT ); + linefeed; +constant ("#define _PGD_ORDER " ,PGD_ORDER ); +constant ("#define _PMD_ORDER " ,PMD_ORDER ); +constant ("#define _PTE_ORDER " ,PTE_ORDER ); + linefeed; +constant ("#define _PTRS_PER_PGD " ,PTRS_PER_PGD ); +constant ("#define _PTRS_PER_PMD " ,PTRS_PER_PMD ); +constant ("#define _PTRS_PER_PTE " ,PTRS_PER_PTE ); + linefeed; +} + +void output_sc_defines (void ) +{ +text ("/* Linux sigcontext offsets. */" ); + offset("#define SC_REGS ", struct sigcontext, sc_regs); + offset("#define SC_FPREGS ", struct sigcontext, sc_fpregs); + offset("#define SC_MDHI ", struct sigcontext, sc_mdhi); + offset("#define SC_MDLO ", struct sigcontext, sc_mdlo); + offset("#define SC_PC ", struct sigcontext, sc_pc); + offset("#define SC_STATUS ", struct sigcontext, sc_status); + offset("#define SC_FPC_CSR ", struct sigcontext, sc_fpc_csr); + offset("#define SC_FPC_EIR ", struct sigcontext, sc_fpc_eir); + offset("#define SC_CAUSE ", struct sigcontext, sc_cause); + offset("#define SC_BADVADDR ", struct sigcontext, sc_badvaddr); + linefeed; +} + +#ifdef CONFIG_MIPS32_COMPAT +void output_sc32_defines (void ) +{ +text ("/* Linux 32-bit sigcontext offsets. */" ); + offset("#define SC32_FPREGS ", struct sigcontext32, sc_fpregs); + offset("#define SC32_FPC_CSR ", struct sigcontext32, sc_fpc_csr); + offset("#define SC32_FPC_EIR ", struct sigcontext32, sc_fpc_eir); + linefeed; +} +#endif + +void output_signal_defined (void ) +{ +text ("/* Linux signal numbers. */" ); +constant ("#define _SIGHUP " ,SIGHUP ); +constant ("#define _SIGINT " ,SIGINT ); +constant ("#define _SIGQUIT " ,SIGQUIT ); +constant ("#define _SIGILL " ,SIGILL ); +constant ("#define _SIGTRAP " ,SIGTRAP ); +constant ("#define _SIGIOT " ,SIGIOT ); +constant ("#define _SIGABRT " ,SIGABRT ); +constant ("#define _SIGEMT " ,SIGEMT ); +constant ("#define _SIGFPE " ,SIGFPE ); +constant ("#define _SIGKILL " ,SIGKILL ); +constant ("#define _SIGBUS " ,SIGBUS ); +constant ("#define _SIGSEGV " ,SIGSEGV ); +constant ("#define _SIGSYS " ,SIGSYS ); +constant ("#define _SIGPIPE " ,SIGPIPE ); +constant ("#define _SIGALRM " ,SIGALRM ); +constant ("#define _SIGTERM " ,SIGTERM ); +constant ("#define _SIGUSR1 " ,SIGUSR1 ); +constant ("#define _SIGUSR2 " ,SIGUSR2 ); +constant ("#define _SIGCHLD " ,SIGCHLD ); +constant ("#define _SIGPWR " ,SIGPWR ); +constant ("#define _SIGWINCH " ,SIGWINCH ); +constant ("#define _SIGURG " ,SIGURG ); +constant ("#define _SIGIO " ,SIGIO ); +constant ("#define _SIGSTOP " ,SIGSTOP ); +constant ("#define _SIGTSTP " ,SIGTSTP ); +constant ("#define _SIGCONT " ,SIGCONT ); +constant ("#define _SIGTTIN " ,SIGTTIN ); +constant ("#define _SIGTTOU " ,SIGTTOU ); +constant ("#define _SIGVTALRM " ,SIGVTALRM ); +constant ("#define _SIGPROF " ,SIGPROF ); +constant ("#define _SIGXCPU " ,SIGXCPU ); +constant ("#define _SIGXFSZ " ,SIGXFSZ ); + linefeed; +} + +void output_irq_cpustat_t_defines (void ) +{ +text ("/* Linux irq_cpustat_t offsets. */" ); +offset ("#define IC_SOFTIRQ_PENDING " , irq_cpustat_t, __softirq_pending); +size ("#define IC_IRQ_CPUSTAT_T " , irq_cpustat_t); + linefeed; +}
arch/mips/kernel/offset.c deleted +0 -314
314 lines not on this page · raw message
Quoted 4 lines · Sam Ravnborg
I've started suing the alternate format as you described. So I cannot pull from that respository myself.
http: + rsync: failed?
If you first do a "git fetch linus" to fetch all the objects in my archive, then you should be able to pull from the cleaned-up archive fine, simply because that archive is missing only bits that you already had locally (and thus wouldn't fetch anyway).
Quoted 1 line
I hope you know a few smart tricks.
That's a very stupid trick, but it should work for you ;)
Linus
Quoted 3 lines · Sam Ravnborg
I've started suing the alternate format as you described. So I cannot pull from that respository myself.
Btw, it works for me, so your archive looks ok.
Your diffstat is broken, though:
Quoted 2 lines
Makefile | 1 b/Makefile | 23 +-
Notice how "Makefile" shows up twice, because you didn't use "-p1" to diffstat (or just use "git-apply --stat", which should get it right).
Quoted 1 line
13 files changed, 345 insertions(+), 337 deletions(-)
The real stats are:
12 files changed, 345 insertions(+), 337 deletions(-)
according to git, thanks to that.
Linus