Skip to contentSkip to conversation

kbuild fixes

PATCH In review Sam Ravnborg 2 participants 6 messages Sep 11, 2005

Subsystems (7)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 kbuild fixes

Hi Linus.

First round of small kbuild fixes (it's monday here in 15 minutes).

o Rename prepare to archprepare to get dependency order correct
o fix silentoldconfig with make O=
o rename mips/kernel/offset.c to asm-offsets.c

Can be pulled from:

www.kernel.org/pub/scm/linux/kernel/git/sam/kbuild.git

I've started suing the alternate format as you described. So I cannot pull from that respository myself.
http: + rsync: failed?

I hope you know a few smart tricks.

diffstat - the major part is the rename.
The rest is only a few lines / one-liners.

 Makefile                             |    1 
 arch/mips/kernel/offset.c            |  314 -----------------------------------
 b/Documentation/kbuild/makefiles.txt |   14 -
 b/Makefile                           |   23 +-
 b/arch/arm/Makefile                  |    2 
 b/arch/cris/Makefile                 |    2 
 b/arch/ia64/Makefile                 |    2 
 b/arch/mips/kernel/asm-offsets.c     |  314 +++++++++++++++++++++++++++++++++++
 b/arch/ppc/Makefile                  |    2 
 b/arch/sh/Makefile                   |    2 
 b/arch/sh64/Makefile                 |    2 
 b/arch/um/Makefile                   |    2 
 b/arch/xtensa/Makefile               |    2 
 13 files changed, 345 insertions(+), 337 deletions(-)

Patches will follow.

Sam

#1 lore raw

PATCH 1/3 kbuild: rename prepare to archprepare to fix dependency chain

Subject: [PATCH 1/3] kbuild: rename prepare to archprepare to fix dependency chain

When introducing the generic asm-offsets.h support the dependency chain for the prepare targets was changed. All build scripts expecting include/asm/asm-offsets.h to be made when using the prepare target would broke. With the limited number of prepare targets left in arch Makefiles the trivial solution was to introduce a new arch specific target: archprepare

The dependency chain looks like this now:

prepare
|

  +--> prepare0
         |
         +--> archprepare
                |
		+--> scripts_basic
                +--> prepare1
                       |
                       +---> prepare2
                               |
                               +--> prepare3

So prepare 3 is processed before prepare2 etc.
This guaantees that the asm symlink, version.h, scripts_basic are all updated before archprepare is processed.

prepare0 which build the asm-offsets.h file will need the actions performed by archprepare.

The head target is now named prepare, because users scripts will most likely use that target, but prepare-all has been kept for compatibility. Updated Documentation/kbuild/makefiles.txt.

---

 Documentation/kbuild/makefiles.txt |   14 +++++++-------
 Makefile                           |   23 +++++++++++++++--------
 arch/arm/Makefile                  |    2 +-
 arch/cris/Makefile                 |    2 +-
 arch/ia64/Makefile                 |    2 +-
 arch/ppc/Makefile                  |    2 +-
 arch/sh/Makefile                   |    2 +-
 arch/sh64/Makefile                 |    2 +-
 arch/um/Makefile                   |    2 +-
 arch/xtensa/Makefile               |    2 +-
 10 files changed, 30 insertions(+), 23 deletions(-)

5bb78269000cf326bfdfa19f79449c02a9158020

Documentation/kbuild/makefiles.txt +7 -7
@@ -31,7 +31,7 @@ This document describes the Linux kernel
 
 	=== 6 Architecture Makefiles
 	   --- 6.1 Set variables to tweak the build to the architecture
-	   --- 6.2 Add prerequisites to prepare:
+	   --- 6.2 Add prerequisites to archprepare:
 	   --- 6.3 List directories to visit when descending
 	   --- 6.4 Architecture specific boot images
 	   --- 6.5 Building non-kbuild targets
@@ -734,18 +734,18 @@ When kbuild executes the following steps
 	for loadable kernel modules.
 
  
---- 6.2 Add prerequisites to prepare:
+--- 6.2 Add prerequisites to archprepare:
 
-	The prepare: rule is used to list prerequisites that needs to be
+	The archprepare: rule is used to list prerequisites that needs to be
 	built before starting to descend down in the subdirectories.
 	This is usual header files containing assembler constants.
 
 		Example:
-		#arch/s390/Makefile
-		prepare: include/asm-$(ARCH)/offsets.h
+		#arch/arm/Makefile
+		archprepare: maketools
 
-	In this example the file include/asm-$(ARCH)/offsets.h will
-	be built before descending down in the subdirectories.
+	In this example the file target maketools will be processed
+	before descending down in the subdirectories.
 	See also chapter XXX-TODO that describe how kbuild supports
 	generating offset header files.
 
Makefile +15 -8
@@ -776,15 +776,20 @@ $(sort $(vmlinux-init) $(vmlinux-main)) 
 # Error messages still appears in the original language
 
 .PHONY: $(vmlinux-dirs)
-$(vmlinux-dirs): prepare-all scripts
+$(vmlinux-dirs): prepare scripts
 	$(Q)$(MAKE) $(build)=$@
 
 # Things we need to do before we recursively start building the kernel
-# or the modules are listed in "prepare-all".
-# A multi level approach is used. prepare1 is updated first, then prepare0.
-# prepare-all is the collection point for the prepare targets.
+# or the modules are listed in "prepare".
+# A multi level approach is used. prepareN is processed before prepareN-1.
+# archprepare is used in arch Makefiles and when processed asm symlink,
+# version.h and scripts_basic is processed / created.
 
-.PHONY: prepare-all prepare prepare0 prepare1 prepare2 prepare3
+# Listed in dependency order
+.PHONY: prepare archprepare prepare0 prepare1 prepare2 prepare3
+
+# prepare-all is deprecated, use prepare as valid replacement
+.PHONY: prepare-all
 
 # prepare3 is used to check if we are building in a separate output directory,
 # and if so do:
@@ -813,11 +818,13 @@ ifneq ($(KBUILD_MODULES),)
 	$(Q)mkdir -p $(MODVERDIR)
 endif
 
-prepare0: prepare prepare1 FORCE
+archprepare: prepare1 scripts_basic
+
+prepare0: archprepare FORCE
 	$(Q)$(MAKE) $(build)=.
 
 # All the preparing..
-prepare-all: prepare0
+prepare prepare-all: prepare0
 
 #	Leave this as default for preprocessing vmlinux.lds.S, which is now
 #	done in arch/$(ARCH)/kernel/Makefile
@@ -908,7 +915,7 @@ modules: $(vmlinux-dirs) $(if $(KBUILD_B
 
 # Target to prepare building external modules
 .PHONY: modules_prepare
-modules_prepare: prepare-all scripts
+modules_prepare: prepare scripts
 
 # Target to install modules
 .PHONY: modules_install
arch/arm/Makefile +1 -1
@@ -175,7 +175,7 @@ else
 endif
 	@touch $@
 
-prepare: maketools include/asm-arm/.arch
+archprepare: maketools include/asm-arm/.arch
 
 .PHONY: maketools FORCE
 maketools: include/linux/version.h FORCE
arch/cris/Makefile +1 -1
@@ -107,7 +107,7 @@ archclean:
 	rm -f timage vmlinux.bin decompress.bin rescue.bin cramfs.img
 	rm -rf $(LD_SCRIPT).tmp
 
-prepare: $(SRC_ARCH)/.links $(srctree)/include/asm-$(ARCH)/.arch
+archprepare: $(SRC_ARCH)/.links $(srctree)/include/asm-$(ARCH)/.arch
 
 # Create some links to make all tools happy
 $(SRC_ARCH)/.links:
arch/ia64/Makefile +1 -1
@@ -82,7 +82,7 @@ unwcheck: vmlinux
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
 
-prepare:  include/asm-ia64/.offsets.h.stamp
+archprepare:  include/asm-ia64/.offsets.h.stamp
 
 include/asm-ia64/.offsets.h.stamp:
 	mkdir -p include/asm-ia64
arch/ppc/Makefile +1 -1
@@ -107,7 +107,7 @@ archclean:
 	# Temporary hack until we have migrated to asm-powerpc
 	$(Q)rm -rf arch/$(ARCH)/include
 
-prepare: checkbin
+archprepare: checkbin
 
 # Temporary hack until we have migrated to asm-powerpc
 include/asm: arch/$(ARCH)/include/asm
arch/sh/Makefile +1 -1
@@ -152,7 +152,7 @@ endif
 	@touch $@
 
 
-prepare: maketools include/asm-sh/.cpu include/asm-sh/.mach
+archprepare: maketools include/asm-sh/.cpu include/asm-sh/.mach
 
 .PHONY: maketools FORCE
 maketools:  include/linux/version.h FORCE
arch/sh64/Makefile +1 -1
@@ -73,7 +73,7 @@ compressed: zImage
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
 
-prepare: arch/$(ARCH)/lib/syscalltab.h
+archprepare: arch/$(ARCH)/lib/syscalltab.h
 
 define filechk_gen-syscalltab
        (set -e; \
arch/um/Makefile +1 -1
@@ -107,7 +107,7 @@ else
 $(shell cd $(ARCH_DIR) && ln -sf Kconfig.$(SUBARCH) Kconfig.arch)
 endif
 
-prepare: $(ARCH_SYMLINKS) $(SYS_HEADERS) $(GEN_HEADERS)
+archprepare: $(ARCH_SYMLINKS) $(SYS_HEADERS) $(GEN_HEADERS)
 
 LINK-$(CONFIG_LD_SCRIPT_STATIC) += -static
 LINK-$(CONFIG_LD_SCRIPT_DYN) += -Wl,-rpath,/lib
arch/xtensa/Makefile +1 -1
@@ -66,7 +66,7 @@ boot		:= arch/xtensa/boot
 
 archinc		:= include/asm-xtensa
 
-prepare: $(archinc)/.platform
+archprepare: $(archinc)/.platform
 
 # Update machine cpu and platform symlinks if something which affects
 # them changed.
#2 lore raw

PATCH 2/3 kbuild: fix silentoldconfig with make O=

In reply to Sam Ravnborg

Subject: [PATCH 2/3] kbuild: fix silentoldconfig with make O=

Al Viro reported that sometimes silentoldconfig failed because output directory was missing.
So create it unconditionally before executing conf

---

 Makefile |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

5011cdd01bedd66b314e330a638c97984c71b53d

Makefile +1 -0
@@ -491,6 +491,7 @@ include .config
 # If .config is newer than include/linux/autoconf.h, someone tinkered
 # with it and forgot to run make oldconfig
 include/linux/autoconf.h: .config
+	$(Q)mkdir -p include/linux
 	$(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
 else
 # Dummy target needed, because used as prerequisite
#3 lore raw

PATCH 3/3 mips: rename offsets.c to asm-offsets.c

In reply to Sam Ravnborg

Subject: [PATCH 3/3] mips: rename offsets.c to asm-offsets.c

Cannot build MIPS now.
We need to change offset.c to asm-offsets.c

---

 arch/mips/kernel/asm-offsets.c |  314 ++++++++++++++++++++++++++++++++++++++++
 arch/mips/kernel/offset.c      |  314 ----------------------------------------
 2 files changed, 314 insertions(+), 314 deletions(-)
 create mode 100644 arch/mips/kernel/asm-offsets.c
 delete mode 100644 arch/mips/kernel/offset.c

e6c69bd39199656a8bbd0569edaff60574ff9cac

arch/mips/kernel/asm-offsets.c new file +314 -0
new file mode 100644
@@ -0,0 +1,314 @@
+/*
+ * offset.c: Calculate pt_regs and task_struct offsets.
+ *
+ * Copyright (C) 1996 David S. Miller
+ * Copyright (C) 1997, 1998, 1999, 2000, 2001, 2002, 2003 Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ *
+ * Kevin Kissell, [email protected] and Carsten Langgaard, [email protected]
+ * Copyright (C) 2000 MIPS Technologies, Inc.
+ */
+#include <linux/config.h>
+#include <linux/compat.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+
+#include <asm/ptrace.h>
+#include <asm/processor.h>
+
+#define text(t) __asm__("\n@@@" t)
+#define _offset(type, member) (&(((type *)NULL)->member))
+#define offset(string, ptr, member) \
+	__asm__("\n@@@" string "%0" : : "i" (_offset(ptr, member)))
+#define constant(string, member) \
+	__asm__("\n@@@" string "%x0" : : "ri" (member))
+#define size(string, size) \
+	__asm__("\n@@@" string "%0" : : "i" (sizeof(size)))
+#define linefeed text("")
+
+void output_ptreg_defines(void)
+{
+	text("/* MIPS pt_regs offsets. */");
+	offset("#define PT_R0     ", struct pt_regs, regs[0]);
+	offset("#define PT_R1     ", struct pt_regs, regs[1]);
+	offset("#define PT_R2     ", struct pt_regs, regs[2]);
+	offset("#define PT_R3     ", struct pt_regs, regs[3]);
+	offset("#define PT_R4     ", struct pt_regs, regs[4]);
+	offset("#define PT_R5     ", struct pt_regs, regs[5]);
+	offset("#define PT_R6     ", struct pt_regs, regs[6]);
+	offset("#define PT_R7     ", struct pt_regs, regs[7]);
+	offset("#define PT_R8     ", struct pt_regs, regs[8]);
+	offset("#define PT_R9     ", struct pt_regs, regs[9]);
+	offset("#define PT_R10    ", struct pt_regs, regs[10]);
+	offset("#define PT_R11    ", struct pt_regs, regs[11]);
+	offset("#define PT_R12    ", struct pt_regs, regs[12]);
+	offset("#define PT_R13    ", struct pt_regs, regs[13]);
+	offset("#define PT_R14    ", struct pt_regs, regs[14]);
+	offset("#define PT_R15    ", struct pt_regs, regs[15]);
+	offset("#define PT_R16    ", struct pt_regs, regs[16]);
+	offset("#define PT_R17    ", struct pt_regs, regs[17]);
+	offset("#define PT_R18    ", struct pt_regs, regs[18]);
+	offset("#define PT_R19    ", struct pt_regs, regs[19]);
+	offset("#define PT_R20    ", struct pt_regs, regs[20]);
+	offset("#define PT_R21    ", struct pt_regs, regs[21]);
+	offset("#define PT_R22    ", struct pt_regs, regs[22]);
+	offset("#define PT_R23    ", struct pt_regs, regs[23]);
+	offset("#define PT_R24    ", struct pt_regs, regs[24]);
+	offset("#define PT_R25    ", struct pt_regs, regs[25]);
+	offset("#define PT_R26    ", struct pt_regs, regs[26]);
+	offset("#define PT_R27    ", struct pt_regs, regs[27]);
+	offset("#define PT_R28    ", struct pt_regs, regs[28]);
+	offset("#define PT_R29    ", struct pt_regs, regs[29]);
+	offset("#define PT_R30    ", struct pt_regs, regs[30]);
+	offset("#define PT_R31    ", struct pt_regs, regs[31]);
+	offset("#define PT_LO     ", struct pt_regs, lo);
+	offset("#define PT_HI     ", struct pt_regs, hi);
+	offset("#define PT_EPC    ", struct pt_regs, cp0_epc);
+	offset("#define PT_BVADDR ", struct pt_regs, cp0_badvaddr);
+	offset("#define PT_STATUS ", struct pt_regs, cp0_status);
+	offset("#define PT_CAUSE  ", struct pt_regs, cp0_cause);
+	size("#define PT_SIZE   ", struct pt_regs);
+	linefeed;
+}
+
+void output_task_defines(void)
+{
+	text("/* MIPS task_struct offsets. */");
+	offset("#define TASK_STATE         ", struct task_struct, state);
+	offset("#define TASK_THREAD_INFO   ", struct task_struct, thread_info);
+	offset("#define TASK_FLAGS         ", struct task_struct, flags);
+	offset("#define TASK_MM            ", struct task_struct, mm);
+	offset("#define TASK_PID           ", struct task_struct, pid);
+	size(  "#define TASK_STRUCT_SIZE   ", struct task_struct);
+	linefeed;
+}
+
+void output_thread_info_defines(void)
+{
+	text("/* MIPS thread_info offsets. */");
+	offset("#define TI_TASK            ", struct thread_info, task);
+	offset("#define TI_EXEC_DOMAIN     ", struct thread_info, exec_domain);
+	offset("#define TI_FLAGS           ", struct thread_info, flags);
+	offset("#define TI_CPU             ", struct thread_info, cpu);
+	offset("#define TI_PRE_COUNT       ", struct thread_info, preempt_count);
+	offset("#define TI_ADDR_LIMIT      ", struct thread_info, addr_limit);
+	offset("#define TI_RESTART_BLOCK   ", struct thread_info, restart_block);
+	constant("#define _THREAD_SIZE_ORDER ", THREAD_SIZE_ORDER);
+	constant("#define _THREAD_SIZE       ", THREAD_SIZE);
+	constant("#define _THREAD_MASK       ", THREAD_MASK);
+	linefeed;
+}
+
+void output_thread_defines(void)
+{
+	text("/* MIPS specific thread_struct offsets. */");
+	offset("#define THREAD_REG16   ", struct task_struct, thread.reg16);
+	offset("#define THREAD_REG17   ", struct task_struct, thread.reg17);
+	offset("#define THREAD_REG18   ", struct task_struct, thread.reg18);
+	offset("#define THREAD_REG19   ", struct task_struct, thread.reg19);
+	offset("#define THREAD_REG20   ", struct task_struct, thread.reg20);
+	offset("#define THREAD_REG21   ", struct task_struct, thread.reg21);
+	offset("#define THREAD_REG22   ", struct task_struct, thread.reg22);
+	offset("#define THREAD_REG23   ", struct task_struct, thread.reg23);
+	offset("#define THREAD_REG29   ", struct task_struct, thread.reg29);
+	offset("#define THREAD_REG30   ", struct task_struct, thread.reg30);
+	offset("#define THREAD_REG31   ", struct task_struct, thread.reg31);
+	offset("#define THREAD_STATUS  ", struct task_struct,
+	       thread.cp0_status);
+	offset("#define THREAD_FPU     ", struct task_struct, thread.fpu);
+
+	offset("#define THREAD_BVADDR  ", struct task_struct, \
+	       thread.cp0_badvaddr);
+	offset("#define THREAD_BUADDR  ", struct task_struct, \
+	       thread.cp0_baduaddr);
+	offset("#define THREAD_ECODE   ", struct task_struct, \
+	       thread.error_code);
+	offset("#define THREAD_TRAPNO  ", struct task_struct, thread.trap_no);
+	offset("#define THREAD_MFLAGS  ", struct task_struct, thread.mflags);
+	offset("#define THREAD_TRAMP   ", struct task_struct, \
+	       thread.irix_trampoline);
+	offset("#define THREAD_OLDCTX  ", struct task_struct, \
+	       thread.irix_oldctx);
+	linefeed;
+}
+
+void output_thread_fpu_defines(void)
+{
+	offset("#define THREAD_FPR0    ",
+	       struct task_struct, thread.fpu.hard.fpr[0]);
+	offset("#define THREAD_FPR1    ",
+	       struct task_struct, thread.fpu.hard.fpr[1]);
+	offset("#define THREAD_FPR2    ",
+	       struct task_struct, thread.fpu.hard.fpr[2]);
+	offset("#define THREAD_FPR3    ",
+	       struct task_struct, thread.fpu.hard.fpr[3]);
+	offset("#define THREAD_FPR4    ",
+	       struct task_struct, thread.fpu.hard.fpr[4]);
+	offset("#define THREAD_FPR5    ",
+	       struct task_struct, thread.fpu.hard.fpr[5]);
+	offset("#define THREAD_FPR6    ",
+	       struct task_struct, thread.fpu.hard.fpr[6]);
+	offset("#define THREAD_FPR7    ",
+	       struct task_struct, thread.fpu.hard.fpr[7]);
+	offset("#define THREAD_FPR8    ",
+	       struct task_struct, thread.fpu.hard.fpr[8]);
+	offset("#define THREAD_FPR9    ",
+	       struct task_struct, thread.fpu.hard.fpr[9]);
+	offset("#define THREAD_FPR10   ",
+	       struct task_struct, thread.fpu.hard.fpr[10]);
+	offset("#define THREAD_FPR11   ",
+	       struct task_struct, thread.fpu.hard.fpr[11]);
+	offset("#define THREAD_FPR12   ",
+	       struct task_struct, thread.fpu.hard.fpr[12]);
+	offset("#define THREAD_FPR13   ",
+	       struct task_struct, thread.fpu.hard.fpr[13]);
+	offset("#define THREAD_FPR14   ",
+	       struct task_struct, thread.fpu.hard.fpr[14]);
+	offset("#define THREAD_FPR15   ",
+	       struct task_struct, thread.fpu.hard.fpr[15]);
+	offset("#define THREAD_FPR16   ",
+	       struct task_struct, thread.fpu.hard.fpr[16]);
+	offset("#define THREAD_FPR17   ",
+	       struct task_struct, thread.fpu.hard.fpr[17]);
+	offset("#define THREAD_FPR18   ",
+	       struct task_struct, thread.fpu.hard.fpr[18]);
+	offset("#define THREAD_FPR19   ",
+	       struct task_struct, thread.fpu.hard.fpr[19]);
+	offset("#define THREAD_FPR20   ",
+	       struct task_struct, thread.fpu.hard.fpr[20]);
+	offset("#define THREAD_FPR21   ",
+	       struct task_struct, thread.fpu.hard.fpr[21]);
+	offset("#define THREAD_FPR22   ",
+	       struct task_struct, thread.fpu.hard.fpr[22]);
+	offset("#define THREAD_FPR23   ",
+	       struct task_struct, thread.fpu.hard.fpr[23]);
+	offset("#define THREAD_FPR24   ",
+	       struct task_struct, thread.fpu.hard.fpr[24]);
+	offset("#define THREAD_FPR25   ",
+	       struct task_struct, thread.fpu.hard.fpr[25]);
+	offset("#define THREAD_FPR26   ",
+	       struct task_struct, thread.fpu.hard.fpr[26]);
+	offset("#define THREAD_FPR27   ",
+	       struct task_struct, thread.fpu.hard.fpr[27]);
+	offset("#define THREAD_FPR28   ",
+	       struct task_struct, thread.fpu.hard.fpr[28]);
+	offset("#define THREAD_FPR29   ",
+	       struct task_struct, thread.fpu.hard.fpr[29]);
+	offset("#define THREAD_FPR30   ",
+	       struct task_struct, thread.fpu.hard.fpr[30]);
+	offset("#define THREAD_FPR31   ",
+	       struct task_struct, thread.fpu.hard.fpr[31]);
+
+	offset("#define THREAD_FCR31   ",
+	       struct task_struct, thread.fpu.hard.fcr31);
+	linefeed;
+}
+
+void output_mm_defines(void)
+{
+	text("/* Size of struct page  */");
+	size("#define STRUCT_PAGE_SIZE   ", struct page);
+	linefeed;
+	text("/* Linux mm_struct offsets. */");
+	offset("#define MM_USERS      ", struct mm_struct, mm_users);
+	offset("#define MM_PGD        ", struct mm_struct, pgd);
+	offset("#define MM_CONTEXT    ", struct mm_struct, context);
+	linefeed;
+	constant("#define _PAGE_SIZE     ", PAGE_SIZE);
+	constant("#define _PAGE_SHIFT    ", PAGE_SHIFT);
+	linefeed;
+	constant("#define _PGD_T_SIZE    ", sizeof(pgd_t));
+	constant("#define _PMD_T_SIZE    ", sizeof(pmd_t));
+	constant("#define _PTE_T_SIZE    ", sizeof(pte_t));
+	linefeed;
+	constant("#define _PGD_T_LOG2    ", PGD_T_LOG2);
+	constant("#define _PMD_T_LOG2    ", PMD_T_LOG2);
+	constant("#define _PTE_T_LOG2    ", PTE_T_LOG2);
+	linefeed;
+	constant("#define _PMD_SHIFT     ", PMD_SHIFT);
+	constant("#define _PGDIR_SHIFT   ", PGDIR_SHIFT);
+	linefeed;
+	constant("#define _PGD_ORDER     ", PGD_ORDER);
+	constant("#define _PMD_ORDER     ", PMD_ORDER);
+	constant("#define _PTE_ORDER     ", PTE_ORDER);
+	linefeed;
+	constant("#define _PTRS_PER_PGD  ", PTRS_PER_PGD);
+	constant("#define _PTRS_PER_PMD  ", PTRS_PER_PMD);
+	constant("#define _PTRS_PER_PTE  ", PTRS_PER_PTE);
+	linefeed;
+}
+
+void output_sc_defines(void)
+{
+	text("/* Linux sigcontext offsets. */");
+	offset("#define SC_REGS       ", struct sigcontext, sc_regs);
+	offset("#define SC_FPREGS     ", struct sigcontext, sc_fpregs);
+	offset("#define SC_MDHI       ", struct sigcontext, sc_mdhi);
+	offset("#define SC_MDLO       ", struct sigcontext, sc_mdlo);
+	offset("#define SC_PC         ", struct sigcontext, sc_pc);
+	offset("#define SC_STATUS     ", struct sigcontext, sc_status);
+	offset("#define SC_FPC_CSR    ", struct sigcontext, sc_fpc_csr);
+	offset("#define SC_FPC_EIR    ", struct sigcontext, sc_fpc_eir);
+	offset("#define SC_CAUSE      ", struct sigcontext, sc_cause);
+	offset("#define SC_BADVADDR   ", struct sigcontext, sc_badvaddr);
+	linefeed;
+}
+
+#ifdef CONFIG_MIPS32_COMPAT
+void output_sc32_defines(void)
+{
+	text("/* Linux 32-bit sigcontext offsets. */");
+	offset("#define SC32_FPREGS     ", struct sigcontext32, sc_fpregs);
+	offset("#define SC32_FPC_CSR    ", struct sigcontext32, sc_fpc_csr);
+	offset("#define SC32_FPC_EIR    ", struct sigcontext32, sc_fpc_eir);
+	linefeed;
+}
+#endif
+
+void output_signal_defined(void)
+{
+	text("/* Linux signal numbers. */");
+	constant("#define _SIGHUP     ", SIGHUP);
+	constant("#define _SIGINT     ", SIGINT);
+	constant("#define _SIGQUIT    ", SIGQUIT);
+	constant("#define _SIGILL     ", SIGILL);
+	constant("#define _SIGTRAP    ", SIGTRAP);
+	constant("#define _SIGIOT     ", SIGIOT);
+	constant("#define _SIGABRT    ", SIGABRT);
+	constant("#define _SIGEMT     ", SIGEMT);
+	constant("#define _SIGFPE     ", SIGFPE);
+	constant("#define _SIGKILL    ", SIGKILL);
+	constant("#define _SIGBUS     ", SIGBUS);
+	constant("#define _SIGSEGV    ", SIGSEGV);
+	constant("#define _SIGSYS     ", SIGSYS);
+	constant("#define _SIGPIPE    ", SIGPIPE);
+	constant("#define _SIGALRM    ", SIGALRM);
+	constant("#define _SIGTERM    ", SIGTERM);
+	constant("#define _SIGUSR1    ", SIGUSR1);
+	constant("#define _SIGUSR2    ", SIGUSR2);
+	constant("#define _SIGCHLD    ", SIGCHLD);
+	constant("#define _SIGPWR     ", SIGPWR);
+	constant("#define _SIGWINCH   ", SIGWINCH);
+	constant("#define _SIGURG     ", SIGURG);
+	constant("#define _SIGIO      ", SIGIO);
+	constant("#define _SIGSTOP    ", SIGSTOP);
+	constant("#define _SIGTSTP    ", SIGTSTP);
+	constant("#define _SIGCONT    ", SIGCONT);
+	constant("#define _SIGTTIN    ", SIGTTIN);
+	constant("#define _SIGTTOU    ", SIGTTOU);
+	constant("#define _SIGVTALRM  ", SIGVTALRM);
+	constant("#define _SIGPROF    ", SIGPROF);
+	constant("#define _SIGXCPU    ", SIGXCPU);
+	constant("#define _SIGXFSZ    ", SIGXFSZ);
+	linefeed;
+}
+
+void output_irq_cpustat_t_defines(void)
+{
+	text("/* Linux irq_cpustat_t offsets. */");
+	offset("#define IC_SOFTIRQ_PENDING ", irq_cpustat_t, __softirq_pending);
+	size("#define IC_IRQ_CPUSTAT_T   ", irq_cpustat_t);
+	linefeed;
+}
arch/mips/kernel/offset.c deleted +0 -314

314 lines not on this page · raw message

#4 lore raw
In reply to Sam Ravnborg
Quoted 4 lines · Sam Ravnborg

I've started suing the alternate format as you described. So I cannot pull from that respository myself.
http: + rsync: failed?

If you first do a "git fetch linus" to fetch all the objects in my archive, then you should be able to pull from the cleaned-up archive fine, simply because that archive is missing only bits that you already had locally (and thus wouldn't fetch anyway).

Quoted 1 line

I hope you know a few smart tricks.

That's a very stupid trick, but it should work for you ;)

Linus

#5 lore raw
In reply to Sam Ravnborg
Quoted 3 lines · Sam Ravnborg

I've started suing the alternate format as you described. So I cannot pull from that respository myself.

Btw, it works for me, so your archive looks ok.

Your diffstat is broken, though:

Quoted 2 lines
 Makefile                             |    1 
 b/Makefile                           |   23 +-

Notice how "Makefile" shows up twice, because you didn't use "-p1" to diffstat (or just use "git-apply --stat", which should get it right).

Quoted 1 line
 13 files changed, 345 insertions(+), 337 deletions(-)

The real stats are:

 12 files changed, 345 insertions(+), 337 deletions(-)

according to git, thanks to that.

Linus