Skip to contentSkip to conversation

Upgrade 2.6.12-rc4 -> 2.6.13.1 broke DVD-R writing (fails consistenly in OPC phase)

DISCUSSION Ville Herva 3 participants 6 messages Sep 25, 2005 – Nov 20, 2005

lore
Share & tools
lore
#0 lore raw

After I upgraded from 2.6.12-rc4 to 2.6.13.1, I can no longer write DVD-R (haven't tried DVD+R nor CD-R).

The command

growisofs -r -l -J -R -f -graft-points ${=FILES} -Z /dev/hdc

always gives:

:-[ PERFORM OPC failed with SK=3h/ASC=73h/ACQ=03h]: Input/output error

Nothing relevant in dmesg.

The drive is Optoride DVD±RW DD0401, the medium is Verbatim DVD-R 8x, and the chipset is i815; Celeron Tualatin 1.4GHZ; Abit ST6R.

I tried the growisofs command probably a dozen times, rebooted and powered off in the middle¹. I tried a couple of other discs from the same ("known good") batch. cdrecord also fails. I tried to set -speed=1, 2, 4, but growisofs claims setting speed to anything but 8x does not succeed.

The drive is able to read CD and DVD media just fine with 2.6.13.1.

I booted back to 2.6.12-rc4 and the recording succeeded at the first try. I used the exact same disc that had failed with 2.6.13.1.

The .config from 2.6.12-rc4 and 2.6.13.1 is nearly identical, but with 2.6.13.1 I use HZ=250 (that being the default nowadays) and 2.6.13.1 has CONFIG_PREEMPT_VOLUNTARY=y instead of 2.6.12-rc4's CONFIG_PREEMPT=y and CONFIG_PREEMPT_BKL=y ².

Any ideas?

-- v --

[email protected]

¹) In past, the DVD-R drive has sometimes gotten so confused it needs a
power off before it co-operates. However, in those cases it has stopped responsing altogether, which it didn't do this time.
²) The desktop does seem more responsive with 2.6.13.1-

#1 lore raw

Ville Herva skrev:

Quoted 8 lines

The .config from 2.6.12-rc4 and 2.6.13.1 is nearly identical, but with
2.6.13.1 I use HZ=250 (that being the default nowadays) and 2.6.13.1 has CONFIG_PREEMPT_VOLUNTARY=y instead of 2.6.12-rc4's CONFIG_PREEMPT=y and CONFIG_PREEMPT_BKL=y ².

Any ideas?

Have you tried with HZ=1000?

Signature · 1 line
Simon Strandman <[email protected]>
#2 lore raw
Quoted 10 lines · you [Simon Strandman]

Ville Herva skrev:

Quoted 6 lines

The .config from 2.6.12-rc4 and 2.6.13.1 is nearly identical, but with 2.6.13.1 I use HZ=250 (that being the default nowadays) and 2.6.13.1 has CONFIG_PREEMPT_VOLUNTARY=y instead of 2.6.12-rc4's CONFIG_PREEMPT=y and CONFIG_PREEMPT_BKL=y ².

Any ideas?

Have you tried with HZ=1000?

No yet.

I did see the HZ=250 problem wrt DVD recording thread earlier, but I got the impression it had to do with not being able to supply data fast enough to the drive.

In my case, it fails before it even write a single byte to the disc. (Fortunately it means it doesn't ruin the disc each time I try to write.)

-- v --

[email protected]

#3 lore raw
Quoted 12 lines · you [Ville Herva]
Quoted 10 lines · you [Simon Strandman]

Ville Herva skrev:

Quoted 6 lines

The .config from 2.6.12-rc4 and 2.6.13.1 is nearly identical, but with 2.6.13.1 I use HZ=250 (that being the default nowadays) and 2.6.13.1 has CONFIG_PREEMPT_VOLUNTARY=y instead of 2.6.12-rc4's CONFIG_PREEMPT=y and CONFIG_PREEMPT_BKL=y ².

Any ideas?

Have you tried with HZ=1000?

Quoted 8 lines

No yet.

I did see the HZ=250 problem wrt DVD recording thread earlier, but I got the impression it had to do with not being able to supply data fast enough to the drive.

In my case, it fails before it even write a single byte to the disc. (Fortunately it means it doesn't ruin the disc each time I try to write.)

Recompiled the same 2.6.13.1 kernel with HZ=1000. DVD-R writing still fails with the exact same error.

-- v --

[email protected]

#4 lore raw

2.6.14-rc4: broken DVD-R recording [Re: Upgrade 2.6.12-rc4 -> 2.6.13.1 broke DVD-R writing (fails consistently in OPC phase)]

Quoted 19 lines · you [Ville Herva]
Quoted 18 lines · you [Ville Herva]
Quoted 10 lines · you [Simon Strandman]

Ville Herva skrev:

Quoted 6 lines

The .config from 2.6.12-rc4 and 2.6.13.1 is nearly identical, but with 2.6.13.1 I use HZ=250 (that being the default nowadays) and 2.6.13.1 has CONFIG_PREEMPT_VOLUNTARY=y instead of 2.6.12-rc4's CONFIG_PREEMPT=y and CONFIG_PREEMPT_BKL=y ².

Any ideas?

Have you tried with HZ=1000?

No yet.

I did see the HZ=250 problem wrt DVD recording thread earlier, but I got the impression it had to do with not being able to supply data fast enough to the drive.

Quoted 5 lines
Quoted 2 lines

In my case, it fails before it even write a single byte to the disc. (Fortunately it means it doesn't ruin the disc each time I try to write.)

Recompiled the same 2.6.13.1 kernel with HZ=1000. DVD-R writing still fails with the exact same error.

Still happens with 2.6.14-rc4.

Peter Österlund's suggestion to kill hald and kded in the pktcdvd thread did not help either. This is a Fedora rawhide installation, though.

-- v --

[email protected]

#5 lore raw
In reply to Ville Herva
Quoted 21 lines · you [Ville Herva]

After I upgraded from 2.6.12-rc4 to 2.6.13.1, I can no longer write DVD-R (haven't tried DVD+R nor CD-R).

The command

growisofs -r -l -J -R -f -graft-points ${=FILES} -Z /dev/hdc

always gives:

:-[ PERFORM OPC failed with SK=3h/ASC=73h/ACQ=03h]: Input/output error

Nothing relevant in dmesg.

The drive is Optoride DVD±RW DD0401, the medium is Verbatim DVD-R 8x, and the chipset is i815; Celeron Tualatin 1.4GHZ; Abit ST6R.

I tried the growisofs command probably a dozen times, rebooted and powered off in the middle¹. I tried a couple of other discs from the same ("known good") batch. cdrecord also fails. I tried to set -speed=1, 2, 4, but growisofs claims setting speed to anything but 8x does not succeed.

Quoted 4 lines

The drive is able to read CD and DVD media just fine with 2.6.13.1.

I booted back to 2.6.12-rc4 and the recording succeeded at the first try. I used the exact same disc that had failed with 2.6.13.1.

This still happens with 2.6.14-rc2.

I found a work-around, though. It seems this happens every time I rip an audio cd and then try to burn a dvd. If I mount a data cd in between, it seems to work. It seems even a soft reboot is not always enough to clear problem.

What is curious, though, is that 2.6.12-rc4 and earlier newer seemed to show this. With 2.6.13.1 and newer it seems fairly consistent.

-- v --

[email protected]