Upgrade 2.6.12-rc4 -> 2.6.13.1 broke DVD-R writing (fails consistenly in OPC phase)
After I upgraded from 2.6.12-rc4 to 2.6.13.1, I can no longer write DVD-R (haven't tried DVD+R nor CD-R).
The command
growisofs -r -l -J -R -f -graft-points ${=FILES} -Z /dev/hdc
always gives:
:-[ PERFORM OPC failed with SK=3h/ASC=73h/ACQ=03h]: Input/output error
Nothing relevant in dmesg.
The drive is Optoride DVD±RW DD0401, the medium is Verbatim DVD-R 8x, and the chipset is i815; Celeron Tualatin 1.4GHZ; Abit ST6R.
I tried the growisofs command probably a dozen times, rebooted and powered off in the middle¹. I tried a couple of other discs from the same ("known good") batch. cdrecord also fails. I tried to set -speed=1, 2, 4, but growisofs claims setting speed to anything but 8x does not succeed.
The drive is able to read CD and DVD media just fine with 2.6.13.1.
I booted back to 2.6.12-rc4 and the recording succeeded at the first try. I used the exact same disc that had failed with 2.6.13.1.
The .config from 2.6.12-rc4 and 2.6.13.1 is nearly identical, but with 2.6.13.1 I use HZ=250 (that being the default nowadays) and 2.6.13.1 has CONFIG_PREEMPT_VOLUNTARY=y instead of 2.6.12-rc4's CONFIG_PREEMPT=y and CONFIG_PREEMPT_BKL=y ².
Any ideas?
-- v --
¹) In past, the DVD-R drive has sometimes gotten so confused it needs a
power off before it co-operates. However, in those cases it has stopped responsing altogether, which it didn't do this time.
²) The desktop does seem more responsive with 2.6.13.1-
Ville Herva skrev:
Quoted 8 lines
The .config from 2.6.12-rc4 and 2.6.13.1 is nearly identical, but with
2.6.13.1 I use HZ=250 (that being the default nowadays) and 2.6.13.1 hasCONFIG_PREEMPT_VOLUNTARY=yinstead of 2.6.12-rc4'sCONFIG_PREEMPT=yandCONFIG_PREEMPT_BKL=y².Any ideas?
Have you tried with HZ=1000?
Signature · 1 line
Simon Strandman <[email protected]>
Quoted 10 lines · you [Simon Strandman]
Ville Herva skrev:
Quoted 6 lines
The .config from 2.6.12-rc4 and 2.6.13.1 is nearly identical, but with 2.6.13.1 I use HZ=250 (that being the default nowadays) and 2.6.13.1 has
CONFIG_PREEMPT_VOLUNTARY=yinstead of 2.6.12-rc4'sCONFIG_PREEMPT=yandCONFIG_PREEMPT_BKL=y².Any ideas?
Have you tried with HZ=1000?
No yet.
I did see the HZ=250 problem wrt DVD recording thread earlier, but I got the impression it had to do with not being able to supply data fast enough to the drive.
In my case, it fails before it even write a single byte to the disc. (Fortunately it means it doesn't ruin the disc each time I try to write.)
-- v --
Quoted 12 lines · you [Ville Herva]
Quoted 10 lines · you [Simon Strandman]
Ville Herva skrev:
Quoted 6 lines
The .config from 2.6.12-rc4 and 2.6.13.1 is nearly identical, but with 2.6.13.1 I use HZ=250 (that being the default nowadays) and 2.6.13.1 has
CONFIG_PREEMPT_VOLUNTARY=yinstead of 2.6.12-rc4'sCONFIG_PREEMPT=yandCONFIG_PREEMPT_BKL=y².Any ideas?
Have you tried with HZ=1000?
Quoted 8 lines
No yet.
I did see the HZ=250 problem wrt DVD recording thread earlier, but I got the impression it had to do with not being able to supply data fast enough to the drive.
In my case, it fails before it even write a single byte to the disc. (Fortunately it means it doesn't ruin the disc each time I try to write.)
Recompiled the same 2.6.13.1 kernel with HZ=1000. DVD-R writing still fails with the exact same error.
-- v --
2.6.14-rc4: broken DVD-R recording [Re: Upgrade 2.6.12-rc4 -> 2.6.13.1 broke DVD-R writing (fails consistently in OPC phase)]
Quoted 19 lines · you [Ville Herva]
Quoted 18 lines · you [Ville Herva]
Quoted 10 lines · you [Simon Strandman]
Ville Herva skrev:
Quoted 6 lines
The .config from 2.6.12-rc4 and 2.6.13.1 is nearly identical, but with 2.6.13.1 I use HZ=250 (that being the default nowadays) and 2.6.13.1 has
CONFIG_PREEMPT_VOLUNTARY=yinstead of 2.6.12-rc4'sCONFIG_PREEMPT=yandCONFIG_PREEMPT_BKL=y².Any ideas?
Have you tried with HZ=1000?
No yet.
I did see the HZ=250 problem wrt DVD recording thread earlier, but I got the impression it had to do with not being able to supply data fast enough to the drive.
Quoted 5 lines
Quoted 2 lines
In my case, it fails before it even write a single byte to the disc. (Fortunately it means it doesn't ruin the disc each time I try to write.)
Recompiled the same 2.6.13.1 kernel with HZ=1000. DVD-R writing still fails with the exact same error.
Still happens with 2.6.14-rc4.
Peter Österlund's suggestion to kill hald and kded in the pktcdvd thread did not help either. This is a Fedora rawhide installation, though.
-- v --
Quoted 21 lines · you [Ville Herva]
After I upgraded from 2.6.12-rc4 to 2.6.13.1, I can no longer write DVD-R (haven't tried DVD+R nor CD-R).
The command
growisofs -r -l -J -R -f -graft-points ${=FILES} -Z
/dev/hdcalways gives:
:-[ PERFORM OPC failed with SK=3h/ASC=73h/ACQ=03h]: Input/output error
Nothing relevant in dmesg.
The drive is Optoride DVD±RW DD0401, the medium is Verbatim DVD-R 8x, and the chipset is i815; Celeron Tualatin 1.4GHZ; Abit ST6R.
I tried the growisofs command probably a dozen times, rebooted and powered off in the middle¹. I tried a couple of other discs from the same ("known good") batch. cdrecord also fails. I tried to set -speed=1, 2, 4, but growisofs claims setting speed to anything but 8x does not succeed.
Quoted 4 lines
The drive is able to read CD and DVD media just fine with 2.6.13.1.
I booted back to 2.6.12-rc4 and the recording succeeded at the first try. I used the exact same disc that had failed with 2.6.13.1.
This still happens with 2.6.14-rc2.
I found a work-around, though. It seems this happens every time I rip an audio cd and then try to burn a dvd. If I mount a data cd in between, it seems to work. It seems even a soft reboot is not always enough to clear problem.
What is curious, though, is that 2.6.12-rc4 and earlier newer seemed to show this. With 2.6.13.1 and newer it seems fairly consistent.
-- v --