simple SPI controller implementation on PXA2xx SSP port
cover simple SPI controller implementation on PXA2xx SSP port
Following this will be two patches, releasing an initial "SPI controller" implementation running on David Brownell's "simple SPI framework" and a prototype "SPI protocol" driver for the Cirrus Logic CS8415A SPD/IF decoder chip. The controller should run on any PXA2xx SSP port and has been tested on the PXA255 NSSP port. Complete board setup and description facilities per the the SPI framework are supported.
Your comments and suggestions encouraged! You can e-mail me directly if you have any question regarding running SPI controller on your board.
Thank you David for helping me make this real!
Stephen Street
Quoted 11 lines · Stephen Street
Following this will be two patches, releasing an initial "SPI controller" implementation running on David Brownell's "simple SPI framework" and a prototype "SPI protocol" driver for the Cirrus Logic CS8415A SPD/IF decoder chip. The controller should run on any PXA2xx SSP port and has been tested on the PXA255 NSSP port. Complete board setup and description facilities per the the SPI framework are supported.
Your comments and suggestions encouraged! You can e-mail me directly if you have any question regarding running SPI controller on your board.
Could you reformat this to follow the kernel coding style?
Robert
Signature · 5 lines
Dipl.-Ing. Robert Schwebel | http://www.pengutronix.de
Pengutronix - Linux Solutions for Science and Industry
Handelsregister: Amtsgericht Hildesheim, HRA 2686
Hannoversche Str. 2, 31134 Hildesheim, Germany
Phone: +49-5121-206917-0 | Fax: +49-5121-206917-9Quoted 1 line · Robert Schwebel
Could you reformat this to follow the kernel coding style?
Sorry, my mailer destroyed the patch (tabs removed). I'm working to fix this today.
-Stephen
"Afflicted by numerous newbie problems"