simple SPI controller implementation on PXA2xx SSP port

Stephen Street lkml 1 version Oct 4, 2005 In review

Get series with b4

b4 am [email protected]

Versions newest first

v1 Latest Oct 4, 20052 patches 2 repliesIn review

Patches in v1 No applies recorded yet

#	Subject and files	Size	Replies	Applied
1/2	simple SPI controller implementation on PXA2xx SSP port`drivers/spi/Kconfig 2005-10-04 14:00:12.279449000 -0700` `drivers/spi/Makefile 2005-10-04 14:00:12.279449000 -0700` `drivers/spi/pxa2xx_spi_ssp.c 2005-10-04 12:50:10.699272000 -0700` +1 more	+791 -0	0 replies
2/2	simple SPI controller implementation on PXA2xx SSP port`drivers/spi/cs8415a.c 2005-10-04 14:00:12.279449000 -0700` `include/linux/spi/cirrus.h 2005-10-04 13:05:06.897768000 -0700` `include/linux/spi/cs8415a.h 2005-10-04 14:19:40.422850000 -0700`	+917 -0	0 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH/RFC 0/2] simple SPI controller implementation on PXA2xx SSP port

Following this will be two patches, releasing an initial "SPI controller" implementation running on David Brownell's "simple SPI framework" and a prototype "SPI protocol" driver for the Cirrus Logic CS8415A SPD/IF decoder chip. The controller should run on any PXA2xx SSP port and has been tested on the PXA255 NSSP port. Complete board setup and description facilities per the the SPI framework are supported.

Your comments and suggestions encouraged! You can e-mail me directly if you have any question regarding running SPI controller on your board.

Thank you David for helping me make this real!

Stephen Street

Read the cover letter in its thread