Skip to contentSkip to conversation

Some problems with 2.6.13.4

DISCUSSION Nico Schottelius 5 participants 9 messages Oct 15, 2005 – Oct 24, 2005

lore
Share & tools
lore
#0 lore raw

Hello!

With 2.6.13.4 I've problems on several machines:

- IBM Thinkpad 600: Hangs (no panic, simply dead) after HDC (cdrom) is initialized [Works with 2.6.13.5]
- Dell Latitude C400: Keyboard does not work
- new HP-Servers (ML-350): Hangup when syslog is started

What information do you want to have from those machines? lspci, dmesg, cpuinfo, .config when running with older kernels?

The kernel configurations are used from the versions before, with running make oldconfig before.

Greetings,

Nico

Signature · 2 lines
Latest project: cconfig (http://nico.schotteli.us/papers/linux/cconfig/)
Open Source nutures open minds and free, creative developers.
#1 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: RIPEMD160

Quoted 2 lines · Nico Schottelius

The kernel configurations are used from the versions before, with running make oldconfig before.

so, these machines were running fine with 2.6.13.3 or .2 and stopped working with 2.6.13.4? if yes, then perhaps you can narrow it down to one of the changes in patch-2.6.13.3-4.gz or patch-2.6.13.2-3.gz

(from http://www.kernel.org/pub/linux/kernel/v2.6/incr/)

- --
BOFH excuse #102:

Power company testing new voltage spike (creation) equipment -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFDURqx+A7rjkF8z0wRAzFvAJ9wwu3+Bc7pJK0XozM8cmPEPxv7kQCg1N8N +1dujn/0Wb6imBoRd60lZ80=
=C8UB
-----END PGP SIGNATURE-----

#2 lore raw

Christian Kujau [Sat, Oct 15, 2005 at 05:05:21PM +0200]:

Quoted 4 lines

-----BEGIN PGP SIGNED MESSAGE-----
Hash: RIPEMD160

Nico Schottelius schrieb:

Quoted 8 lines
Quoted 2 lines

The kernel configurations are used from the versions before, with running make oldconfig before.

so, these machines were running fine with 2.6.13.3 or .2 and stopped working with 2.6.13.4? if yes, then perhaps you can narrow it down to one of the changes in patch-2.6.13.3-4.gz or patch-2.6.13.2-3.gz

(from http://www.kernel.org/pub/linux/kernel/v2.6/incr/)

Sorry, I sent the message before inserting this info:

- ibm tp runs with 2.6.12.5
- dell latitude runs with 2.6.10

I personally have access to the ibm tp and I'll test 2.6.13.3 in some hours (which it nees to compile it).

I'll report more info than. Perhaps Daniel Aubry can test on his dell, too.

Nico

Signature · 2 lines
Latest project: cconfig (http://nico.schotteli.us/papers/linux/cconfig/)
Open Source nutures open minds and free, creative developers.
#3 lore raw

I was a little bit wrong:

2.6.13.3 and 2.6.13.4 freeze both on the ibm tp 600, but first after "Freeing unused kernel memory: 96k"

There is no output from init (neither "cinit-0.2: Booting from ..." nor "INIT:" (sys-v-init)), so this is not an init problem.

Could we somehow debug this differently or do I have to install 2.6.13.2 and 2.6.13.1, too? It would take simply hours until it is finished here.

Nico

Nico Schottelius [Sat, Oct 15, 2005 at 05:40:48PM +0200]:

Quoted 29 lines

Christian Kujau [Sat, Oct 15, 2005 at 05:05:21PM +0200]:

Quoted 4 lines

-----BEGIN PGP SIGNED MESSAGE-----
Hash: RIPEMD160

Nico Schottelius schrieb:

Quoted 8 lines
Quoted 2 lines

The kernel configurations are used from the versions before, with running make oldconfig before.

so, these machines were running fine with 2.6.13.3 or .2 and stopped working with 2.6.13.4? if yes, then perhaps you can narrow it down to one of the changes in patch-2.6.13.3-4.gz or patch-2.6.13.2-3.gz

(from http://www.kernel.org/pub/linux/kernel/v2.6/incr/)

Sorry, I sent the message before inserting this info:

- ibm tp runs with 2.6.12.5
- dell latitude runs with 2.6.10

I personally have access to the ibm tp and I'll test 2.6.13.3 in some hours (which it nees to compile it).

I'll report more info than. Perhaps Daniel Aubry can test on his dell, too.

Nico

Signature · 2 lines
Latest project: cconfig (http://nico.schotteli.us/papers/linux/cconfig/)
Open Source nutures open minds and free, creative developers.
Signature · 2 lines
Latest project: cconfig (http://nico.schotteli.us/papers/linux/cconfig/)
Open Source nutures open minds and free, creative developers.
#4 lore raw

On 10/15/05, Nico Schottelius <[email protected]> wrote:
[snip]

Quoted 4 lines

Could we somehow debug this differently or do I have to install 2.6.13.2 and 2.6.13.1, too? It would take simply hours until it is finished here.

If you have another, faster, machine available you could build the kernel(s) on that one. You don't have to build a kernel on the same machine that is later supposed to run it.
Also, if you have more than one machine (even if they are not especially fast) then you can use distcc (http://distcc.samba.org/) to distribute the build over multiple machines which can speed up a build a great deal.

[snip]

--
Jesper Juhl <[email protected]>
Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please http://www.expita.com/nomime.html

#5 lore raw

Jesper Juhl [Sat, Oct 15, 2005 at 10:22:22PM +0200]:

Quoted 9 lines · Nico Schottelius

[snip]

Quoted 4 lines

Could we somehow debug this differently or do I have to install 2.6.13.2 and 2.6.13.1, too? It would take simply hours until it is finished here.

If you have another, faster, machine available you could build the kernel(s) on that one.

Actually, one of my fastest machines is this one:

bruehe2# cat /proc/cpuinfo
[...]
model name : Pentium III (Katmai)
cpu MHz : 551.280
[...]

And one, which has a not-so-good connection to me.

Quoted 2 lines

You don't have to build a kernel on the same
machine that is later supposed to run it.

That's clear :-)

Quoted 4 lines

Also, if you have more than one machine (even if they are not especially fast) then you can use distcc (http://distcc.samba.org/) to distribute the build over multiple machines which can speed up a build a great deal.

distcc will fail here, because of different gccs and different distributions (ever tried to use gentoo and distcc in the same distcc-network? It's a real pain).

Thanks for the hints anyway,

Nico

Signature · 2 lines
Latest project: cconfig (http://nico.schotteli.us/papers/linux/cconfig/)
Open Source nutures open minds and free, creative developers.
#6 lore raw
Quoted 3 lines · On Sat, 15 Oct 2005 22:38:24 +0200 Nico Schottelius…

distcc will fail here, because of different gccs and different distributions (ever tried to use gentoo and distcc in the same distcc-network? It's a real pain).

You can also use ccache to speed-up:
http://ccache.samba.org/

Signature · 2 lines
	Paolo Ornati
	Linux 2.6.14-rc4-g7a3ca7d2 on x86_64
#7 lore raw
In reply to Nico Schottelius
Quoted 37 lines · Nico Schottelius

Jesper Juhl [Sat, Oct 15, 2005 at 10:22:22PM +0200]:

Quoted 10 lines · Nico Schottelius

[snip]

Quoted 4 lines

Could we somehow debug this differently or do I have to install 2.6.13.2 and 2.6.13.1, too? It would take simply hours until it is finished here.

If you have another, faster, machine available you could build the kernel(s) on that one.

Actually, one of my fastest machines is this one:

bruehe2# cat /proc/cpuinfo
[...]
model name : Pentium III (Katmai)
cpu MHz : 551.280
[...]

And one, which has a not-so-good connection to me.

Quoted 2 lines

You don't have to build a kernel on the same
machine that is later supposed to run it.

That's clear :-)

Quoted 4 lines

Also, if you have more than one machine (even if they are not especially fast) then you can use distcc (http://distcc.samba.org/) to distribute the build over multiple machines which can speed up a build a great deal.

Quoted 3 lines

distcc will fail here, because of different gccs and different distributions (ever tried to use gentoo and distcc in the same distcc-network? It's a real pain).

How come?
I am using distcc + ccache in default install with at least -j5 on my network of Gentoo machines. And building a kernel with -j8 on 4 boxen (P4@2GHz each) is a snap.
Particularly pleasing to watch distccmon-gui :-D

Kalin.

Signature · 3 lines
|[ ~~~~~~~~~~~~~~~~~~~~~~ ]|
+-> http://ThinRope.net/ <-+
|[ ______________________ ]|
#8 lore raw
In reply to Nico Schottelius

After some heavy compile hours, here are the results:

- 2.6.13.1 and 2.6.13.2 behave the same way with the same config.

For reference I now published the configs [0]. 2.6.12.5 was the config source, all others where generated using make oldconfig.

Perhaps there's a somehow heavy configuration mistake in it?

Btw, Daniel Aubry fixed his keyboard problem with disabling usb keyboard support in the bios (is this really the right way?).

Nico

[0]: http://creme.schottelius.org/~nico/temp/kb-configs/

Nico Schottelius [Sat, Oct 15, 2005 at 10:02:45PM +0200]:

Quoted 50 lines

I was a little bit wrong:

2.6.13.3 and 2.6.13.4 freeze both on the ibm tp 600, but first after "Freeing unused kernel memory: 96k"

There is no output from init (neither "cinit-0.2: Booting from ..." nor "INIT:" (sys-v-init)), so this is not an init problem.

Could we somehow debug this differently or do I have to install 2.6.13.2 and 2.6.13.1, too? It would take simply hours until it is finished here.

Nico

Nico Schottelius [Sat, Oct 15, 2005 at 05:40:48PM +0200]:

Quoted 29 lines

Christian Kujau [Sat, Oct 15, 2005 at 05:05:21PM +0200]:

Quoted 4 lines

-----BEGIN PGP SIGNED MESSAGE-----
Hash: RIPEMD160

Nico Schottelius schrieb:

Quoted 8 lines
Quoted 2 lines

The kernel configurations are used from the versions before, with running make oldconfig before.

so, these machines were running fine with 2.6.13.3 or .2 and stopped working with 2.6.13.4? if yes, then perhaps you can narrow it down to one of the changes in patch-2.6.13.3-4.gz or patch-2.6.13.2-3.gz

(from http://www.kernel.org/pub/linux/kernel/v2.6/incr/)

Sorry, I sent the message before inserting this info:

- ibm tp runs with 2.6.12.5
- dell latitude runs with 2.6.10

I personally have access to the ibm tp and I'll test 2.6.13.3 in some hours (which it nees to compile it).

I'll report more info than. Perhaps Daniel Aubry can test on his dell, too.

Nico

Signature · 2 lines
Latest project: cconfig (http://nico.schotteli.us/papers/linux/cconfig/)
Open Source nutures open minds and free, creative developers.
Signature · 2 lines
Latest project: cconfig (http://nico.schotteli.us/papers/linux/cconfig/)
Open Source nutures open minds and free, creative developers.
Signature · 2 lines
Latest project: cconfig (http://nico.schotteli.us/papers/linux/cconfig/)
Open Source nutures open minds and free, creative developers.