Some problems with 2.6.13.4
Hello!
With 2.6.13.4 I've problems on several machines:
- IBM Thinkpad 600: Hangs (no panic, simply dead) after HDC (cdrom) is initialized [Works with 2.6.13.5]
- Dell Latitude C400: Keyboard does not work
- new HP-Servers (ML-350): Hangup when syslog is started
What information do you want to have from those machines? lspci, dmesg, cpuinfo, .config when running with older kernels?
The kernel configurations are used from the versions before, with running make oldconfig before.
Greetings,
Nico
Signature · 2 lines
Latest project: cconfig (http://nico.schotteli.us/papers/linux/cconfig/) Open Source nutures open minds and free, creative developers.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: RIPEMD160
Quoted 2 lines · Nico Schottelius
The kernel configurations are used from the versions before, with running make oldconfig before.
so, these machines were running fine with 2.6.13.3 or .2 and stopped working with 2.6.13.4? if yes, then perhaps you can narrow it down to one of the changes in patch-2.6.13.3-4.gz or patch-2.6.13.2-3.gz
(from http://www.kernel.org/pub/linux/kernel/v2.6/incr/)
- --
BOFH excuse #102:
Power company testing new voltage spike (creation) equipment -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org
iD8DBQFDURqx+A7rjkF8z0wRAzFvAJ9wwu3+Bc7pJK0XozM8cmPEPxv7kQCg1N8N +1dujn/0Wb6imBoRd60lZ80=
=C8UB
-----END PGP SIGNATURE-----
Christian Kujau [Sat, Oct 15, 2005 at 05:05:21PM +0200]:
Quoted 4 lines
-----BEGIN PGP SIGNED MESSAGE-----
Hash: RIPEMD160Nico Schottelius schrieb:
Quoted 8 lines
Quoted 2 lines
The kernel configurations are used from the versions before, with running make oldconfig before.
so, these machines were running fine with 2.6.13.3 or .2 and stopped working with 2.6.13.4? if yes, then perhaps you can narrow it down to one of the changes in patch-2.6.13.3-4.gz or patch-2.6.13.2-3.gz
Sorry, I sent the message before inserting this info:
- ibm tp runs with 2.6.12.5
- dell latitude runs with 2.6.10
I personally have access to the ibm tp and I'll test 2.6.13.3 in some hours (which it nees to compile it).
I'll report more info than. Perhaps Daniel Aubry can test on his dell, too.
Nico
Signature · 2 lines
Latest project: cconfig (http://nico.schotteli.us/papers/linux/cconfig/) Open Source nutures open minds and free, creative developers.
I was a little bit wrong:
2.6.13.3 and 2.6.13.4 freeze both on the ibm tp 600, but first after "Freeing unused kernel memory: 96k"
There is no output from init (neither "cinit-0.2: Booting from ..." nor "INIT:" (sys-v-init)), so this is not an init problem.
Could we somehow debug this differently or do I have to install 2.6.13.2 and 2.6.13.1, too? It would take simply hours until it is finished here.
Nico
Nico Schottelius [Sat, Oct 15, 2005 at 05:40:48PM +0200]:
Quoted 29 lines
Christian Kujau [Sat, Oct 15, 2005 at 05:05:21PM +0200]:
Quoted 4 lines
-----BEGIN PGP SIGNED MESSAGE-----
Hash: RIPEMD160Nico Schottelius schrieb:
Quoted 8 lines
Quoted 2 lines
The kernel configurations are used from the versions before, with running make oldconfig before.
so, these machines were running fine with 2.6.13.3 or .2 and stopped working with 2.6.13.4? if yes, then perhaps you can narrow it down to one of the changes in patch-2.6.13.3-4.gz or patch-2.6.13.2-3.gz
Sorry, I sent the message before inserting this info:
- ibm tp runs with 2.6.12.5
- dell latitude runs with 2.6.10I personally have access to the ibm tp and I'll test 2.6.13.3 in some hours (which it nees to compile it).
I'll report more info than. Perhaps Daniel Aubry can test on his dell, too.
Nico
Signature · 2 lines
Latest project: cconfig (http://nico.schotteli.us/papers/linux/cconfig/) Open Source nutures open minds and free, creative developers.
Signature · 2 lines
Latest project: cconfig (http://nico.schotteli.us/papers/linux/cconfig/) Open Source nutures open minds and free, creative developers.
On 10/15/05, Nico Schottelius <[email protected]> wrote:
[snip]
Quoted 4 lines
Could we somehow debug this differently or do I have to install 2.6.13.2 and 2.6.13.1, too? It would take simply hours until it is finished here.
If you have another, faster, machine available you could build the kernel(s) on that one. You don't have to build a kernel on the same machine that is later supposed to run it.
Also, if you have more than one machine (even if they are not especially fast) then you can use distcc (http://distcc.samba.org/) to distribute the build over multiple machines which can speed up a build a great deal.
[snip]
--
Jesper Juhl <[email protected]>
Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please http://www.expita.com/nomime.html
Jesper Juhl [Sat, Oct 15, 2005 at 10:22:22PM +0200]:
Quoted 9 lines · Nico Schottelius
[snip]
Quoted 4 lines
Could we somehow debug this differently or do I have to install 2.6.13.2 and 2.6.13.1, too? It would take simply hours until it is finished here.
If you have another, faster, machine available you could build the kernel(s) on that one.
Actually, one of my fastest machines is this one:
bruehe2# cat /proc/cpuinfo
[...]
model name : Pentium III (Katmai)
cpu MHz : 551.280
[...]
And one, which has a not-so-good connection to me.
Quoted 2 lines
You don't have to build a kernel on the same
machine that is later supposed to run it.
That's clear :-)
Quoted 4 lines
Also, if you have more than one machine (even if they are not especially fast) then you can use distcc (http://distcc.samba.org/) to distribute the build over multiple machines which can speed up a build a great deal.
distcc will fail here, because of different gccs and different distributions (ever tried to use gentoo and distcc in the same distcc-network? It's a real pain).
Thanks for the hints anyway,
Nico
Signature · 2 lines
Latest project: cconfig (http://nico.schotteli.us/papers/linux/cconfig/) Open Source nutures open minds and free, creative developers.
Quoted 3 lines · On Sat, 15 Oct 2005 22:38:24 +0200 Nico Schottelius…
distcc will fail here, because of different gccs and different distributions (ever tried to use gentoo and distcc in the same distcc-network? It's a real pain).
You can also use ccache to speed-up:
http://ccache.samba.org/
Signature · 2 lines
Paolo Ornati Linux 2.6.14-rc4-g7a3ca7d2 on x86_64
After some heavy compile hours, here are the results:
- 2.6.13.1 and 2.6.13.2 behave the same way with the same config.
For reference I now published the configs [0]. 2.6.12.5 was the config source, all others where generated using make oldconfig.
Perhaps there's a somehow heavy configuration mistake in it?
Btw, Daniel Aubry fixed his keyboard problem with disabling usb keyboard support in the bios (is this really the right way?).
Nico
[0]: http://creme.schottelius.org/~nico/temp/kb-configs/
Nico Schottelius [Sat, Oct 15, 2005 at 10:02:45PM +0200]:
Quoted 50 lines
I was a little bit wrong:
2.6.13.3 and 2.6.13.4 freeze both on the ibm tp 600, but first after "Freeing unused kernel memory: 96k"
There is no output from init (neither "cinit-0.2: Booting from ..." nor "INIT:" (sys-v-init)), so this is not an init problem.
Could we somehow debug this differently or do I have to install 2.6.13.2 and 2.6.13.1, too? It would take simply hours until it is finished here.
Nico
Nico Schottelius [Sat, Oct 15, 2005 at 05:40:48PM +0200]:
Quoted 29 lines
Christian Kujau [Sat, Oct 15, 2005 at 05:05:21PM +0200]:
Quoted 4 lines
-----BEGIN PGP SIGNED MESSAGE-----
Hash: RIPEMD160Nico Schottelius schrieb:
Quoted 8 lines
Quoted 2 lines
The kernel configurations are used from the versions before, with running make oldconfig before.
so, these machines were running fine with 2.6.13.3 or .2 and stopped working with 2.6.13.4? if yes, then perhaps you can narrow it down to one of the changes in patch-2.6.13.3-4.gz or patch-2.6.13.2-3.gz
Sorry, I sent the message before inserting this info:
- ibm tp runs with 2.6.12.5
- dell latitude runs with 2.6.10I personally have access to the ibm tp and I'll test 2.6.13.3 in some hours (which it nees to compile it).
I'll report more info than. Perhaps Daniel Aubry can test on his dell, too.
Nico
Signature · 2 lines
Latest project: cconfig (http://nico.schotteli.us/papers/linux/cconfig/) Open Source nutures open minds and free, creative developers.Signature · 2 lines
Latest project: cconfig (http://nico.schotteli.us/papers/linux/cconfig/) Open Source nutures open minds and free, creative developers.
Signature · 2 lines
Latest project: cconfig (http://nico.schotteli.us/papers/linux/cconfig/) Open Source nutures open minds and free, creative developers.
Quoted 37 lines · Nico Schottelius
Jesper Juhl [Sat, Oct 15, 2005 at 10:22:22PM +0200]:
Quoted 10 lines · Nico Schottelius
[snip]
Quoted 4 lines
Could we somehow debug this differently or do I have to install 2.6.13.2 and 2.6.13.1, too? It would take simply hours until it is finished here.
If you have another, faster, machine available you could build the kernel(s) on that one.
Actually, one of my fastest machines is this one:
bruehe2# cat
/proc/cpuinfo
[...]
model name : Pentium III (Katmai)
cpu MHz : 551.280
[...]And one, which has a not-so-good connection to me.
Quoted 2 lines
You don't have to build a kernel on the same
machine that is later supposed to run it.That's clear :-)
Quoted 4 lines
Also, if you have more than one machine (even if they are not especially fast) then you can use distcc (http://distcc.samba.org/) to distribute the build over multiple machines which can speed up a build a great deal.
Quoted 3 lines
distcc will fail here, because of different gccs and different distributions (ever tried to use gentoo and distcc in the same distcc-network? It's a real pain).
How come?
I am using distcc + ccache in default install with at least -j5 on my network of Gentoo machines. And building a kernel with -j8 on 4 boxen (P4@2GHz each) is a snap.
Particularly pleasing to watch distccmon-gui :-D
Kalin.
Signature · 3 lines
|[ ~~~~~~~~~~~~~~~~~~~~~~ ]| +-> http://ThinRope.net/ <-+ |[ ______________________ ]|