Skip to contentSkip to conversation

i2c: scx200_acb minimal documentation

PATCH New Jean Delvare 1 participant 1 message Jan 18, 2006

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 8/17 i2c: scx200_acb minimal documentation

From: Ben Gardner <bgardner at wabtec.com>
Content-Disposition: inline; filename=i2c-scx200_acb-07-docs.patch

scx200_acb: Minimal documentation update

Signed-off-by Ben Gardner <bgardner at wabtec.com>
Signed-off-by Jean Delvare <khali at linux-fr.org>
---
 Documentation/i2c/busses/scx200_acb |    5 +++--
 drivers/i2c/busses/Kconfig          |    5 +++--
 2 files changed, 6 insertions(+), 4 deletions(-)
Documentation/i2c/busses/scx200_acb +3 -2
@@ -6,9 +6,10 @@
 -----------------
 
 * base: int
-  Base addresses for the ACCESS.bus controllers
+  Base addresses for the ACCESS.bus controllers on SCx200 and SC1100 devices
 
 Description
 -----------
 
-Enable the use of the ACCESS.bus controllers of a SCx200 processor.
+Enable the use of the ACCESS.bus controller on the Geode SCx200 and
+SC1100 processors and the CS5535 and CS5536 Geode companion devices.
drivers/i2c/busses/Kconfig +3 -2
@@ -389,10 +389,11 @@
 	  also be specified with a module parameter.
 
 config SCx200_ACB
-	tristate "NatSemi SCx200 ACCESS.bus"
+	tristate "Geode ACCESS.bus support"
 	depends on I2C && PCI
 	help
-	  Enable the use of the ACCESS.bus controllers of a SCx200 processor.
+	  Enable the use of the ACCESS.bus controllers on the Geode SCx200 and
+	  SC1100 processors and the CS5535 and CS5536 Geode companion devices.
 
 	  If you don't know what to do here, say N.
 
Signature · 1 line
Jean Delvare