2.6.16rc1 ia64 missing symbol..
kernel/drivers/serial/ioc3_serial.ko needs unknown symbol ioc3_unregister_submodule
CONFIG_SERIAL_SGI_IOC3=mCONFIG_SGI_IOC3=m
Dave
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Dave" == Dave Jones <[email protected]> writes:
Dave> kernel/drivers/serial/ioc3_serial.ko needs unknown symbol Dave> ioc3_unregister_submodule CONFIG_SERIAL_SGI_IOC3=m Dave> CONFIG_SGI_IOC3=m
Just tried it and it works fine for me:
margin:~ # insmod ioc3.ko
margin:~ # insmod ioc3_serial.ko
margin:~ #
This is with the latest git tree from Linus this morning.
Cheers,
Jes
Quoted 6 lines · Jes Sorensen
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Dave" == Dave Jones <[email protected]> writes:
Dave>
kernel/drivers/serial/ioc3_serial.koneeds unknown symbol Dave>ioc3_unregister_submoduleCONFIG_SERIAL_SGI_IOC3=mDave>CONFIG_SGI_IOC3=m
Quoted 7 lines
Just tried it and it works fine for me:
margin:~ # insmod ioc3.ko
margin:~ # insmod ioc3_serial.ko
margin:~ #This is with the latest git tree from Linus this morning.
I still see problems with the latest Linus tree.
kernel/drivers/serial/ioc3_serial.ko needs unknown symbol ioc3_unregister_submodule kernel/drivers/serial/ioc3_serial.ko needs unknown symbol ioc3_disable kernel/drivers/serial/ioc3_serial.ko needs unknown symbol ioc3_gpcr_set kernel/drivers/serial/ioc3_serial.ko needs unknown symbol ioc3_ack kernel/drivers/serial/ioc3_serial.ko needs unknown symbol ioc3_register_submodule kernel/drivers/serial/ioc3_serial.ko needs unknown symbol ioc3_enable kernel/drivers/pci/hotplug/rpaphp.ko needs unknown symbol pci_claim_resource
full .config at http://people.redhat.com/davej/ia64.config
Dave
PATCH 1/1 drivers/sn/ must be entered for CONFIG_SGI_IOC3
In reply to Dave JonesQuoted 4 lines · Dave Jones
kernel/drivers/serial/ioc3_serial.koneeds unknown symbolioc3_unregister_submodule
CONFIG_SERIAL_SGI_IOC3=mCONFIG_SGI_IOC3=m
The untested patch below should fix it.
Quoted 1 line
Dave
cu
Adrian
<-- snip -->
drivers/Makefile renamed from drivers/Makefile.old +1 -0
@@ -70,6 +70,7 @@ obj-$(CONFIG_CPU_FREQ) += cpufreq/ obj-$(CONFIG_MMC) += mmc/ obj-$(CONFIG_INFINIBAND) += infiniband/ +obj-$(CONFIG_SGI_IOC3) += sn/ obj-$(CONFIG_SGI_IOC4) += sn/ obj-y += firmware/ obj-$(CONFIG_CRYPTO) += crypto/
Re: [2.6 patch] drivers/sn/ must be entered for CONFIG_SGI_IOC3
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Adrian" = Adrian Bunk <[email protected]> writes:
Quoted 4 lines · Dave Jones
Quoted 4 lines
kernel/drivers/serial/ioc3_serial.koneeds unknown symbolioc3_unregister_submodule
CONFIG_SERIAL_SGI_IOC3=mCONFIG_SGI_IOC3=m
Adrian> The untested patch below should fix it.
Actually I think this is more appropriate so we don't end up with 17 cases that add drivers/sn to the build lib.
Dave, does this solve the problem?
Cheers,
Jes
Include drivers/sn when CONFIG_IA64_SGI_SN2 or CONFIG_IA64_GENERIC is enabled.
----
arch/ia64/Kconfig | 3 +++ drivers/Makefile | 2 +- 2 files changed, 4 insertions(+), 1 deletion(-)
Index: linux-2.6/arch/ia64/Kconfig =================================--- linux-2.6.orig/arch/ia64/Kconfig +++ linux-2.6/arch/ia64/Kconfig
@@ -374,6 +374,9 @@
To use this option, you have to ensure that the "/proc file system support" (CONFIG_PROC_FS) is enabled, too.
+config SGI_SN
+ def_bool y if (IA64_SGI_SN2 || IA64_GENERIC)
+
source "drivers/firmware/Kconfig"
source "fs/Kconfig.binfmt"
Index: linux-2.6/drivers/Makefile =================================--- linux-2.6.orig/drivers/Makefile +++ linux-2.6/drivers/Makefile
@@ -69,7 +69,7 @@
obj-$(CONFIG_CPU_FREQ) += cpufreq/
obj-$(CONFIG_MMC) += mmc/
obj-$(CONFIG_INFINIBAND) += infiniband/
-obj-$(CONFIG_SGI_IOC4) += sn/
+obj-$(CONFIG_SGI_SN) += sn/
obj-y += firmware/
obj-$(CONFIG_CRYPTO) += crypto/
obj-$(CONFIG_SUPERH) += sh/
Re: [2.6 patch] drivers/sn/ must be entered for CONFIG_SGI_IOC3
Quoted 6 lines · Jes Sorensen
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Adrian" = Adrian Bunk <[email protected]> writes:
Quoted 3 lines · Dave Jones
Quoted 3 lines
kernel/drivers/serial/ioc3_serial.koneeds unknown symbolioc3_unregister_submodule
Quoted 7 lines
Quoted 1 line
Quoted 1 line
CONFIG_SERIAL_SGI_IOC3=mCONFIG_SGI_IOC3=mAdrian> The untested patch below should fix it.
Actually I think this is more appropriate so we don't end up with 17 cases that add
drivers/snto the build lib.
...
I haven't tested your patch, but I agree that it's a better approach than my patch.
Quoted 3 lines
Cheers,
Jes
...
cu
Adrian
Signature · 4 lines
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon SeedRe: [2.6 patch] drivers/sn/ must be entered for CONFIG_SGI_IOC3
In reply to Jes SorensenQuoted 6 lines · Jes Sorensen
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Adrian" = Adrian Bunk <[email protected]> writes:
Quoted 3 lines · Dave Jones
Quoted 3 lines
kernel/drivers/serial/ioc3_serial.koneeds unknown symbolioc3_unregister_submodule
Quoted 8 lines
Quoted 1 line
Quoted 1 line
CONFIG_SERIAL_SGI_IOC3=mCONFIG_SGI_IOC3=mAdrian> The untested patch below should fix it.
Actually I think this is more appropriate so we don't end up with 17 cases that add
drivers/snto the build lib.Dave, does this solve the problem?
Yep, looks like it.
Dave