ahci: get JMicron JMB360 working
PATCH 1/1 ahci: get JMicron JMB360 working
I'll be sending this upstream sooner rather than later, since part of this is a needed bugfix. This is also a minor milestone: the first non-Intel AHCI implementation is working with the AHCI driver. AHCI is a nice SATA controller interface, and it's good to see other vendors using it. VIA is using it as well, and I hope to integrate a patch for VIA AHCI SATA support soon.
This patch, against latest 2.6.16-rc-git, adds support for JMicron and fixes some code that should be Intel-only, but was being executed for all vendors.
drivers/scsi/ahci.c +13 -4
@@ -286,6 +286,8 @@ static const struct pci_device_id ahci_p board_ahci }, /* ICH8M */ {PCI_VENDOR_ID_INTEL ,0x282a ,PCI_ANY_ID ,PCI_ANY_ID ,0 ,0 , board_ahci }, /* ICH8M */ + { 0x197b, 0x2360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_ahci }, /* JMicron JMB360 */ { } /* terminate list */ };
@@ -802,7 +804,6 @@ static int ahci_host_init(struct ata_prostruct pci_dev *pdev =to_pci_dev (probe_ent->dev);void __iomem *mmio = probe_ent->mmio_base;u32 tmp, cap_save; -u16 tmp16;unsigned int i, j, using_dac;int rc;void __iomem *port_mmio;
@@ -836,9 +837,13 @@ static int ahci_host_init(struct ata_prowritel (0xf , mmio +HOST_PORTS_IMPL ); (void )readl (mmio +HOST_PORTS_IMPL );/* flush */ -pci_read_config_word (pdev,0x92 , &tmp16); - tmp16 |=0xf ; -pci_write_config_word (pdev,0x92 , tmp16); +if (pdev->vendor ==PCI_VENDOR_ID_INTEL ) { +u16 tmp16; + +pci_read_config_word (pdev,0x92 , &tmp16); + tmp16 |=0xf ; +pci_write_config_word (pdev,0x92 , tmp16); + } hpriv->cap =readl (mmio +HOST_CAP ); hpriv->port_map =readl (mmio +HOST_PORTS_IMPL );
@@ -1082,6 +1087,10 @@ static int ahci_init_one (struct pci_devif (have_msi) hpriv->flags |=AHCI_FLAG_MSI ; +/* JMicron-specific fixup: make sure we're in AHCI mode */ +if (pdev->vendor ==0x197b ) +pci_write_config_byte (pdev,0x41 ,0xa1 ); +/* initialize adapter */ rc =ahci_host_init (probe_ent);if (rc)
Am Sonntag Januar 29 2006 06:04 schrieb Jeff Garzik:
Quoted 3 lines
This patch, against latest 2.6.16-rc-git, adds support for JMicron and fixes some code that should be Intel-only, but was being executed for all vendors.
Thx, works nicely here with JMicron jMB360 on an Asrock board.
Cheers,
Signature · 3 lines
(°= =°) //\ Prakash Punnoor /\\ V_/ \_V
Quoted 9 lines · Prakash Punnoor
Am Sonntag Januar 29 2006 06:04 schrieb Jeff Garzik:
Quoted 3 lines
This patch, against latest 2.6.16-rc-git, adds support for JMicron and fixes some code that should be Intel-only, but was being executed for all vendors.
Thx, works nicely here with JMicron jMB360 on an Asrock board.
Interesting. On 111105, I wrote to Asrock about Linux libata support for JM360, and mentioned Jeff Garzik as the developer/maintainer, along with his requirements for implementing JM360 libata support, but never got a reply from Asrock. I didn't get back to Garzik either; my apologies...
Due to other work, I didn't go on with that mobo, and partly because I saw no other products using JM360. Nvidia hving bought ULi, I wonder what'll happen to ILi and Asrock.
I know that (fabless) Jmicron does chipset design and integration.
939Dual-SATA2 is interesting as an upgrade board due to performance, price, working PCIe/AGP and provisions for socket M2 via an adapter. Whether this will actually work is of cause to be seen...
Now having libata SATA support gets it back into my thoughts.
@Prakash: Did you test with a SATA-2 disk?
Signature · 2 lines
Kind regards, Mogens Valentin
Am Sonntag Januar 29 2006 19:24 schrieb Mogens Valentin:
[...]
Quoted 4 lines
939Dual-SATA2 is interesting as an upgrade board due to performance, price, working PCIe/AGP and provisions for socket M2 via an adapter. Whether this will actually work is of cause to be seen...
Well, it at least seems to work nicely with an Athlon X2 and 4GB of RAM. :-)
Quoted 3 lines
Now having libata SATA support gets it back into my thoughts.
@Prakash: Did you test with a SATA-2 disk?
Nope, just plain SATA (I).
Signature · 3 lines
(°= =°) //\ Prakash Punnoor /\\ V_/ \_V
Quoted 11 lines · Jeff Garzik
I'll be sending this upstream sooner rather than later, since part of this is a needed bugfix. This is also a minor milestone: the first non-Intel AHCI implementation is working with the AHCI driver. AHCI is a nice SATA controller interface, and it's good to see other vendors using it. VIA is using it as well, and I hope to integrate a patch for VIA AHCI SATA support soon.
This patch, against latest 2.6.16-rc-git, adds support for JMicron and fixes some code that should be Intel-only, but was being executed for all vendors.
Sounds very good, thanks! Does that mean the ASRock MB
http://www.asrock.com/product/product_939Dual-SATA2.htm will work? Docu says "1 x SATA2 connector (based on PCI E SATA2 controller JMB360)".
Best,
Norbert
Am Sonntag Januar 29 2006 12:01 schrieb Norbert Kiesel:
Quoted 8 lines · Jeff Garzik
Quoted 7 lines
I'll be sending this upstream sooner rather than later, since part of this is a needed bugfix. This is also a minor milestone: the first non-Intel AHCI implementation is working with the AHCI driver. AHCI is a nice SATA controller interface, and it's good to see other vendors using it. VIA is using it as well, and I hope to integrate a patch for VIA AHCI SATA support soon.
Quoted 7 lines
Quoted 3 lines
This patch, against latest 2.6.16-rc-git, adds support for JMicron and fixes some code that should be Intel-only, but was being executed for all vendors.
Sounds very good, thanks! Does that mean the ASRock MB
http://www.asrock.com/product/product_939Dual-SATA2.htm will work? Docu says "1 x SATA2 connector (based on PCI E SATA2 controller JMB360)".
Yes, I tested it a few hours ago.
Signature · 3 lines
(°= =°) //\ Prakash Punnoor /\\ V_/ \_V