speedstep-smi not detecting speedstep-capability with early Pentium 3 Coppermine
http://bugzilla.kernel.org/show_bug.cgi?id=5985
------- Additional Comments From [email protected] 2006-01-31 22:48 ------- With the suggested parameters, I get
speedstep-lib: x86: 6, model: 8
speedstep-lib: Coppermine: MSR_IA32_EBL_CR_POWERON is 0x4c080020, 0x0
speedstep-lib: Coppermine: MSR_IA32_PLATFORM ID is 0x0, 0x540000
speedstep-lib: early PIII version
speedstep-smi: signature:0x00008680, command:0x0000e6f5, event:0x00000000, perf_level:0x47534943.
cpufreq-core: trying to register driver speedstep-smi
cpufreq-core: adding CPU 0
speedstep-smi: trying to obtain ownership with command 47534982 at port b2
speedstep-smi: result is 0
speedstep-smi: bug #1422 -- can't read freqs from BIOS
speedstep-smi: could not detect low and high frequencies by SMI call.
speedstep-lib: trying to determine both speeds
speedstep-lib: P3 - MSR_IA32_EBL_CR_POWERON: 0x4c080020 0x0
speedstep-lib: workaround for early PIIIs
speedstep-lib: speed is 500000
speedstep-lib: previous speed is 500000
speedstep-smi: trying to set frequency to state 1 with command 47534982 at port b2
speedstep-smi: retry 1, previous result 0, waiting...
speedstep-smi: retry 2, previous result 0, waiting...
speedstep-smi: retry 3, previous result 0, waiting...
speedstep-smi: retry 4, previous result 0, waiting...
speedstep-smi: retry 5, previous result 0, waiting...
cpufreq: change failed with new_state 2 and result 0
speedstep-lib: P3 - MSR_IA32_EBL_CR_POWERON: 0x4c080020 0x0
speedstep-lib: workaround for early PIIIs
speedstep-lib: speed is 500000
speedstep-lib: low speed is 500000
speedstep-smi: trying to set frequency to state 0 with command 47534982 at port b2
speedstep-smi: retry 1, previous result 0, waiting...
speedstep-smi: retry 2, previous result 0, waiting...
speedstep-smi: retry 3, previous result 0, waiting...
speedstep-smi: retry 4, previous result 0, waiting...
speedstep-smi: retry 5, previous result 0, waiting...
cpufreq: change failed with new_state 2 and result 0
speedstep-lib: P3 - MSR_IA32_EBL_CR_POWERON: 0x4c080020 0x0
speedstep-lib: workaround for early PIIIs
speedstep-lib: speed is 500000
speedstep-lib: high speed is 500000
speedstep-smi: could not detect two different speeds -- aborting.
cpufreq-core: initialization failed
cpufreq-core: no CPU initialized for driver speedstep-smi
cpufreq-core: unregistering CPU 0
The 500 MHz speed is correct, but that's about it. I don't have MS Windows
available right now, but I'll try that out. Thanks for the tips.
------- You are receiving this mail because: ------- You are the assignee for the bug, or are watching the assignee.