Skip to contentSkip to conversation

w83781d: Document the alarm and beep bits

PATCH New Jean Delvare 1 participant 1 message Feb 5, 2006

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 6/11 w83781d: Document the alarm and beep bits

Content-Disposition: inline; filename=hwmon-w83781d-document-alarm-bits.patch

Document the individual alarm and beep bits of the w83781d driver. Ideally we would offer a chip-independant interface for them, but until it's done, it's only fair that we document the current interface.

Signed-off-by Jean Delvare <khali at linux-fr.org>
---
 Documentation/hwmon/w83781d |   19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
Documentation/hwmon/w83781d +19 -0
@@ -123,6 +123,25 @@
 your computer speaker. It is possible to enable all beeping globally,
 or only the beeping for some alarms.
 
+Individual alarm and beep bits:
+
+0x000001: in0
+0x000002: in1
+0x000004: in2
+0x000008: in3
+0x000010: temp1
+0x000020: temp2 (+temp3 on W83781D)
+0x000040: fan1
+0x000080: fan2
+0x000100: in4
+0x000200: in5
+0x000400: in6
+0x000800: fan3
+0x001000: chassis
+0x002000: temp3 (W83782D and W83627HF only)
+0x010000: in7 (W83782D and W83627HF only)
+0x020000: in8 (W83782D and W83627HF only)
+
 If an alarm triggers, it will remain triggered until the hardware register
 is read at least once. This means that the cause for the alarm may
 already have disappeared! Note that in the current implementation, all
Signature · 1 line
Jean Delvare