w83781d: Document the alarm and beep bits
Subsystems (2)
PATCH 6/11 w83781d: Document the alarm and beep bits
Content-Disposition: inline; filename=hwmon-w83781d-document-alarm-bits.patch
Document the individual alarm and beep bits of the w83781d driver. Ideally we would offer a chip-independant interface for them, but until it's done, it's only fair that we document the current interface.
Signed-off-by Jean Delvare <khali at linux-fr.org>
--- Documentation/hwmon/w83781d | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)
Documentation/hwmon/w83781d +19 -0
@@ -123,6 +123,25 @@ your computer speaker. It is possible to enable all beeping globally, or only the beeping for some alarms. +Individual alarm and beep bits: + +0x000001: in0 +0x000002: in1 +0x000004: in2 +0x000008: in3 +0x000010: temp1 +0x000020: temp2 (+temp3 on W83781D) +0x000040: fan1 +0x000080: fan2 +0x000100: in4 +0x000200: in5 +0x000400: in6 +0x000800: fan3 +0x001000: chassis +0x002000: temp3 (W83782D and W83627HF only) +0x010000: in7 (W83782D and W83627HF only) +0x020000: in8 (W83782D and W83627HF only) + If an alarm triggers, it will remain triggered until the hardware register is read at least once. This means that the cause for the alarm may already have disappeared! Note that in the current implementation, all
Signature · 1 line
Jean Delvare