annoying fan problem
Hey folks,
I got an annoying problem with my fan, when I boot the system, it is allways on, with full speed. If I start compiling some stuff, or use BurnP6 to get the CPU over 65 degrees, the fan starts to behave right and goes into passive mode on cooldown. The notebook is an Asus M68Ne and has the latest bios installed. cat trip_points shows :
critical (S5): 105 C passive: 100 C: tc1=2 tc2=10 tsp=100 devices=0xc14d5ea0
cat cooling_mode
<setting not supported>
cooling mode: passive
Any ideas ?
Thanks
Janosch
Quoted 7 lines · Janosch Machowinski
Hey folks,
I got an annoying problem with my fan, when I boot the system, it is allways on, with full speed. If I start compiling some stuff, or use BurnP6 to get the CPU over 65 degrees, the fan starts to behave right and goes into passive mode on cooldown. The notebook is an Asus M68Ne and has the latest bios installed. cattrip_pointsshows :
Quoted 7 lines
critical (S5): 105 C passive: 100 C: tc1=2 tc2=10 tsp=100 devices=0xc14d5ea0cat
cooling_mode
<setting not supported>
cooling mode: passive
There are more people out there with different kind of fan problems.
1. Does grep _WDG /proc/acpi/dsdt matches?
2. Is this only when resuming from a suspend?
3. Do you get semaphore/mutex errors in the latest 2.6.16-rc3 or higher kernels?
Best is you grep bugzilla.kernel.org for fan problems assigned to the ACPI component. Search for a related one and add your info (dmesg and acpidmp output of a recent kernel) or open a new one if you think it's unrelated. Please CC me.
Thomas