Skip to contentSkip to conversation

annoying fan problem

DISCUSSION Janosch Machowinski 2 participants 2 messages Feb 20, 2006 – Feb 22, 2006 ACPI

lore
Share & tools
lore
#0 lore raw

Hey folks,
I got an annoying problem with my fan, when I boot the system, it is allways on, with full speed. If I start compiling some stuff, or use BurnP6 to get the CPU over 65 degrees, the fan starts to behave right and goes into passive mode on cooldown. The notebook is an Asus M68Ne and has the latest bios installed. cat trip_points shows :

critical (S5):           105 C
passive:                 100 C: tc1=2 tc2=10 tsp=100 devices=0xc14d5ea0

cat cooling_mode
<setting not supported>
cooling mode: passive

Any ideas ?
Thanks
Janosch

#1 lore raw
Quoted 7 lines · Janosch Machowinski

Hey folks,
I got an annoying problem with my fan, when I boot the system, it is allways on, with full speed. If I start compiling some stuff, or use BurnP6 to get the CPU over 65 degrees, the fan starts to behave right and goes into passive mode on cooldown. The notebook is an Asus M68Ne and has the latest bios installed. cat trip_points shows :

Quoted 7 lines
critical (S5):           105 C
passive:                 100 C: tc1=2 tc2=10 tsp=100 devices=0xc14d5ea0

cat cooling_mode
<setting not supported>
cooling mode: passive

There are more people out there with different kind of fan problems.

1. Does grep _WDG /proc/acpi/dsdt matches?
2. Is this only when resuming from a suspend?
3. Do you get semaphore/mutex errors in the latest 2.6.16-rc3 or higher kernels?

Best is you grep bugzilla.kernel.org for fan problems assigned to the ACPI component. Search for a related one and add your info (dmesg and acpidmp output of a recent kernel) or open a new one if you think it's unrelated. Please CC me.

Thomas