Cannot compile fw_env tools in u-boot-1.1.4
I go under u-boot-1.1.4/tools/env/ and try to do make but I receive the following error
-> make
ppc_8xx-gcc -Wall -DUSE_HOSTCC crc32.c fw_env.c fw_env_main.c -o fw_printenv
In file included from fw_env.c:34:/opt/eldk_3.1.1/ppc_8xx/usr/include/linux/mtd/mtd.h:13:2: #error This is a kernel header. Perhaps include mtd-user.h instead?
I tried to include mtd-user.h but there still a lot of errors!!
Bye,
Antonio.
Quoted 10 lines · In message <[email protected]> you wrote:
I go under u-boot-1.1.4/tools/env/ and try to do make but I receive the following error
-> make
ppc_8xx-gcc -Wall -DUSE_HOSTCCcrc32.cfw_env.cfw_env_main.c-ofw_printenv
In file included from fw_env.c:34:/opt/eldk_3.1.1/ppc_8xx/usr/include/linux/mtd/mtd.h:13:2: #error This is a kernel header. Perhaps includemtd-user.hinstead?I tried to include
mtd-user.hbut there still a lot of errors!!
I'm afraid this is a known problem. The current code assumes (and works fine) in a Linux 2.4 based environment, but fails (like in your case) when used with 2.6 header files. Unfortunately, adapting the code for a 2.6 context will cause it to brak in 2.4 environments.
I am still trying to figure out if there is a clean way to find out which environment to use; I would like to avoid having to probe for the existience of certain header files in the Makefile.
Any ideas are welcome.
Best regards,
Wolfgang Denk
Signature · 5 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Perfection is reached, not when there is no longer anything to add,
but when there is no longer anything to take away.
- Antoine de Saint-ExuperyThe problem is that I'm using kernel 2.4, the latest kernel from Denx. The eldk_3.1.1 is for linux 2.4 too, or am I wrong?
Best regards,
Antonio.
Wolfgang Denk Scrive:
Quoted 33 lines
Quoted 10 lines · In message <[email protected]> you wrote:
I go under u-boot-1.1.4/tools/env/ and try to do make but I receive the following error
-> make
ppc_8xx-gcc -Wall -DUSE_HOSTCCcrc32.cfw_env.cfw_env_main.c-ofw_printenv
In file included from fw_env.c:34:/opt/eldk_3.1.1/ppc_8xx/usr/include/linux/mtd/mtd.h:13:2: #error This is a kernel header. Perhaps includemtd-user.hinstead?I tried to include
mtd-user.hbut there still a lot of errors!!I'm afraid this is a known problem. The current code assumes (and works fine) in a Linux 2.4 based environment, but fails (like in your case) when used with 2.6 header files. Unfortunately, adapting the code for a 2.6 context will cause it to brak in 2.4 environments.
I am still trying to figure out if there is a clean way to find out which environment to use; I would like to avoid having to probe for the existience of certain header files in the
Makefile.Any ideas are welcome.
Best regards,
Wolfgang Denk
Signature · 5 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Perfection is reached, not when there is no longer anything to add, but when there is no longer anything to take away. - Antoine de Saint-Exupery