Skip to contentSkip to conversation

Cannot compile fw_env tools in u-boot-1.1.4

U-Boot-Users antonio.dibacco 2 participants 3 messages Mar 22, 2006

lore
Share & tools
lore
#0 lore raw

I go under u-boot-1.1.4/tools/env/ and try to do make but I receive the following error
-> make
ppc_8xx-gcc -Wall -DUSE_HOSTCC crc32.c fw_env.c fw_env_main.c -o fw_printenv
In file included from fw_env.c:34:
/opt/eldk_3.1.1/ppc_8xx/usr/include/linux/mtd/mtd.h:13:2: #error This is a kernel header. Perhaps include mtd-user.h instead?

I tried to include mtd-user.h but there still a lot of errors!!

Bye,
Antonio.

#1 lore raw
Quoted 10 lines · In message <[email protected]> you wrote:

I go under u-boot-1.1.4/tools/env/ and try to do make but I receive the following error
-> make
ppc_8xx-gcc -Wall -DUSE_HOSTCC crc32.c fw_env.c fw_env_main.c -o fw_printenv
In file included from fw_env.c:34:
/opt/eldk_3.1.1/ppc_8xx/usr/include/linux/mtd/mtd.h:13:2: #error This is a kernel header. Perhaps include mtd-user.h instead?

I tried to include mtd-user.h but there still a lot of errors!!

I'm afraid this is a known problem. The current code assumes (and works fine) in a Linux 2.4 based environment, but fails (like in your case) when used with 2.6 header files. Unfortunately, adapting the code for a 2.6 context will cause it to brak in 2.4 environments.

I am still trying to figure out if there is a clean way to find out which environment to use; I would like to avoid having to probe for the existience of certain header files in the Makefile.

Any ideas are welcome.

Best regards,

Wolfgang Denk

Signature · 5 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Perfection is reached, not when there is no longer anything  to  add,
but when there is no longer anything to take away.
                                           - Antoine de Saint-Exupery
#2 lore raw

The problem is that I'm using kernel 2.4, the latest kernel from Denx. The eldk_3.1.1 is for linux 2.4 too, or am I wrong?

Best regards,
Antonio.

Wolfgang Denk Scrive:

Quoted 33 lines
Quoted 10 lines · In message <[email protected]> you wrote:

I go under u-boot-1.1.4/tools/env/ and try to do make but I receive the following error
-> make
ppc_8xx-gcc -Wall -DUSE_HOSTCC crc32.c fw_env.c fw_env_main.c -o fw_printenv
In file included from fw_env.c:34:
/opt/eldk_3.1.1/ppc_8xx/usr/include/linux/mtd/mtd.h:13:2: #error This is a kernel header. Perhaps include mtd-user.h instead?

I tried to include mtd-user.h but there still a lot of errors!!

I'm afraid this is a known problem. The current code assumes (and works fine) in a Linux 2.4 based environment, but fails (like in your case) when used with 2.6 header files. Unfortunately, adapting the code for a 2.6 context will cause it to brak in 2.4 environments.

I am still trying to figure out if there is a clean way to find out which environment to use; I would like to avoid having to probe for the existience of certain header files in the Makefile.

Any ideas are welcome.

Best regards,

Wolfgang Denk

Signature · 5 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Perfection is reached, not when there is no longer anything  to  add,
but when there is no longer anything to take away.
                                           - Antoine de Saint-Exupery