Skip to contentSkip to conversation

2.6.17-rc1: SCSI kobject_add problems

BUG Bob Tracy 1 participant 1 message Apr 7, 2006

lore
Share & tools
lore

Bob Tracy

author
#0 lore raw

System is a DEC Alpha 433au with two SCSI disks. SCSI controller is a QLA1040 supported by the qla1280 driver. Runs 2.6.16 fine. Tried booting 2.6.17-rc1 and got

kobject_add failed for 0:0: with -EEXIST, don't try to register things with the same name in the same directory

and a fairly long trace output when the system attempted to add sdb. Not surprisingly, sdb was inaccessible.

Normally (for 2.6.16 anyway), the following relationship exists:

sd 0:0:0:0 sda
sd 0:0:1:0 sdb

More information *might* be available if needed, but will have to be transcribed by hand. My /usr partition is on sdb, so I don't get very far with 2.6.17-rc1 on Alpha :-). The problem is probably specific to the qla1280 or the Alpha, as I have a x86 Adaptec SCSI-based system with multiple spindles that works fine with 2.6.17-rc1.

Signature · 4 lines
-----------------------------------------------------------------------
Bob Tracy                   WTO + WIPO = DMCA? http://www.anti-dmca.org
[email protected]
-----------------------------------------------------------------------